Overloud Mark Studio 2 Bruksanvisning

Läs nedan 📖 manual på svenska för Overloud Mark Studio 2 (8 sidor) i kategorin Programvara för ljud. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
USER MANUAL
Rev. 1.0
INTRODUCTION
Mark Studio 2 faithfully reproduces the sound of ampli ers, modeling pedal e ects, Markbass  ff
amps, cabinets, microphones and the room ambience reverb. Mark Studio 2 comes into several
plugin formats and as a stand alone application and works on Mac and Windows systems.
MAIN INTERFACE
The main interface of Mark Studio 2 has several sections: on the top and centre of the interface
you can see the current setup: the ampli er ( ), the cabinet and microphone ( ) AMP CAB & MIC
and a collection of pedal e ects ( ). These are the main components of the Mark Studio EFFECTS
2 sound chain. Each element of the setup can be changed and adjusted acting on the controls of
the interface.
On the bottom left corner there is the Preset area ( ), where Mark Studio 2 setups can be PRESET
saved and recalled.
Below the e ects section there is the Tuner ( ).TUNER
1
INTERNAL DIAGRAM
To better understand how Mark Studio 2 has been designed, take a look to the diagram. The rst
block, EFFECTS, contains the ve pedal e ects. Next comes the AMP box containing the PRE- ff
amp, the MASTER level and the LIMITER blocks. Next you can see the CAB & MIC block. This main
line of processed sound then gets mixed with a variable portion of LINE OUT and DIRECT signals
to obtain the nal sound.
HOW TO CREATE YOUR OWN SETUP
Here is how you create your own setup in Mark Studio 2.
Ampli er, Cabinet, Microphone
Click the display to see the list of ampli ers, then select the wanted model.AMP MODEL
Click the CAB MODEL display to see the list of cabinets, then select the wanted model. You can
activate the bass re ex option setting REFLEX to ON with cabinets for which this option is
present.
Click the display to see the list of microphones, then select the wanted model. MIC MODEL
There are three additional options: speaker cone alignment ( / ), distance from CENTER BORDER
the cabinet ( /NEAR FAR) and phase inversion (useful when you are mixing some amount of
direct sound - see Mix below - and you experience bass frequency deletion due to phase
con icts).
2

Produktspecifikationer

Varumärke: Overloud
Kategori: Programvara för ljud
Modell: Mark Studio 2

Behöver du hjälp?

Om du behöver hjälp med Overloud Mark Studio 2 ställ en fråga nedan och andra användare kommer att svara dig




Programvara för ljud Overloud Manualer

Programvara för ljud Manualer

Nyaste Programvara för ljud Manualer