Ozito ACP-2415 Bruksanvisning

Ozito Kompressor ACP-2415

Läs nedan 📖 manual på svenska för Ozito ACP-2415 (2 sidor) i kategorin Kompressor. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Psi

Bar

6 8

180

150

100

Psi

Bar

180

150

100

COMPACT AIR

COMPRESSOR

24 L 1.5HP

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 230–240V ~ 50Hz

Motor: 1100W

No Load Speed: 2,850/min

Tank Volume: 24 litres

Max. Pressure: 8bar (116psi)

Max. Flow Rate: 110 l/min

IP Rating: IP20

Weight: 19.5kg

ACP-2415

WHAT’S IN THE BOX

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: air lters and

wheels.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of

with household waste but in an environmentally friendly way. Please

recycle where facilities exist. Check with your local council authority

for recycling advice.

Recycling packaging reduces the need for landll and raw materials.

Reuse of recycled material decreases pollution in the environment.

Please recycle packaging where facilities exist. Check with your

local council authority for recycling advice.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

Filter 402050502028

Wheel 402050502062

Rubber Foot 402050502070

Regulator Valve Assy. 402050502003

Spare parts can be ordered from the Special Orders Desk

at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: enquires@ozito.com.au

SPARE PARTS

ozito.com.au

This appliance is not intended for use by young or inrm persons unless supervised by a

responsible person to ensure that they can use the appliance safely. Young children should be

supervision to ensure that they do not play with play with the appliance.

WARNING. Before connecting a tool to a power source (mains switch power point

receptacle, outlet, etc.) be sure that the voltage supply is the same as that specied on the

nameplate of the tool. A power source with a voltage greater than that specied for the tool

can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool.

Using a power source with a voltage less than the nameplate rating is harmful to the motor.

Always remove the plug from the mains socket before making any adjustments or maintenance.

• To reduce the risk of re or explosion, never spray ammable liquids in a conned area. It is normal

for the compressor motor and pressure switch to produce sparks during use. If sparks come into

contact with petrol vapours or solvents, they may ignite the vapours and cause a re or explosion.

• Always operate the compressor in a well ventilated area. Do not smoke while spraying. Do not

spray where sparks or ames are present. Keep the compressor as far away from the spray area as

possible.

• The solvents trichloroethane and methylene chloride can chemically react with the aluminium

used in some paint spray guns and form an explosion. If these solvents are used, ensure that only

stainless steel spray equipment is connected. The compressor is not affected by the use of these

solvents.

• Never directly inhale the compressed air produced by a compressor and do not use it for charging

breathing tanks.

• Do not use welding equipment in close proximity to the compressor. Do not weld anything to the air

tank of the compressor: this could dangerously weaken the tank and will void the warranty.

• Do not use the compressor outdoors when it is raining or on a wet surface; either situation could

cause an electric shock.

• Always shut off the compressor after use and before servicing. Push the on/off knob down, wait for

the pressurised air to bleed from the tank from the release valve and then remove the electrical plug

from the power supply.

• Check the maximum pressure rating of any tools or accessories that you intend using with the

compressor. The output pressure of the air from the compressor must be regulated so that it never

exceeds the rated pressure of the tool or accessory.

• To avoid the risk of burns and injury from moving parts, do not operate the compressor with the

safety shield removed. Allow hot parts to cool before handling or servicing.

Be certain to read all the labels on the containers of paint or other materials to be sprayed. Closely

follow all safety instructions. Use a respirator mask if there is a chance that you might otherwise

inhale the spray material. Carefully check the effectiveness of any respirator mask you intend using.

• Always wear safety goggles or glasses when using the air compressor. Never point the nozzle of an

accessory towards any part of your body or towards another person.

• Do not attempt to adjust the pressure switch or the release valve located under the pressure switch

cover.

• Drain the moisture from the tank daily. It will help prevent corrosion.

• Pull the ring on the safety valve daily to ensure that it operating properly and to clear any possible

instructions.

• Keep the compressor at least 300mm from the nearest wall to ensure adequate ventilation for

cooling purposes.

• Before transporting the compressor make sure that the pressurised air is bled from the tank and

that the compressor is rmly secured.

• Protect the air hose and cordset from damage. Inspect for weak or worn spots regularly and replace

if necessary.

• Avoid using an extension cord with this product. Use additional air hose instead of an extension

cord to prevent power loss and possible damage to the motor. Use of an extension cord voids the

warranty.

• After long working periods external metal parts could be hot.

• Always press the on/off button down to switch off the compressor before switching off the power or

removing the power plug.

• After using the compressor, switch off the on/off button, disconnect the power supply and open the

outlet valve to release the pressure.

• Do not attempt to remove any part of the machine whilst it is under pressure.

• Use safety equipment including safety goggles or shield, ear protection, breathing or respirator

mask and protective clothing.

• Never attempt to remove any part of the compressor whilst the tank is under pressure.

Wear goggles, wear earmuffs, wear a breathing mask

Never apply the outlet air of this compressor directly on to any part of a person’s body. Do not attempt to

block the air outlet with your nger or any part of your body.

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this

Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any

damage or injury resulting from such cases of misuse.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from

such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The

following hazards may arise in connection with the tool’s construction and design:

• Damage to the lungs if an effective breathing mask is not worn.

• Damage to hearing if effective earmuffs are not worn.

• Damage to the eyes if effective safety goggles or shield are not worn.

WARNING. In the event that an air line is cut or broken, the air supply must be turned off at the

compressor. A broken air line which is not supported is extremely dangerous and can whip around

very quickly, both with the capability of striking people, and blowing foreign particles into the air.

Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air

supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from the

compressor.

AIR COMPRESSOR SAFETY WARNINGS

WARNING! When using mains-powered tools, basic safety precautions, including

the following, should always be followed to reduce risk of re, electric shock,

personal injury and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an

emergency, before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

The electric motor has been designed for 230V and 240V only. Always check that the power supply

corresponds to the voltage on the rating plate.

The tool is earthed in accordance with AS/NZS 60335:2002

Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New

Zealand.

If operating a power tool in a damp location is unavoidable use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order

to avoid a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect

the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged

or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension

lead not suitable for the power input of the tool or which is damaged or defective may result in a risk

of re and electric shock.

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the

warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)

power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol

or medication.

A moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and/or battery pack, picking up or carrying the tool. Carrying power

tools with your nger on the switch or energising power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control

of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce dust-

related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack from the power tool

before making any adjustments, changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualied repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

b. If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualied persons in order to avoid a hazard.

GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY

ELECTRICAL SAFETY

1113

VVolts Hz Hertz

~Alternating current WWatts

min¯

Revolutions or

reciprocation per minute

no No load speed

Warning

Wear hearing protection

Read instruction manual

Beware of electrical voltage

Regulator compliance mark

Beware of hot parts.

Sound power level

Pressure ratingbar

lLitres

4. CLEANING & MAINTENANCE

MAINTENANCE

5. STORAGE

Cleaning the air lter

The air lter prevents dust and dirt being drawn in. It is essential to

clean this lter after at least every 300 hours of service. A clogged air

lter will decrease the compressor’s performance dramatically.

1. Remove the lter from the

compressor by unscrewing the

screw on the plastic cover.

2. Lift off the plastic cover and

remove the intake air lter

beneath.

3. Carefully clean the lter by

tapping or blowing it with low

pressure compressed air

(approx. 3 bar). To assemble,

proceed in reverse order.

IMPORTANT! BEFORE CLEANING YOUR OIL FREE AIR

COMPRESSOR OR CARRYING OUT ANY MAINTENANCE

PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF AND

THE TOOL DISCONNECTED FROM THE POWER SUPPLY

TO PREVENT ACCIDENTAL STARTING.

IMPORTANT! WAIT UNTIL THE COMPRESSOR HAS

COMPLETELY COOLED DOWN. RISK OF BURNS!

IMPORTANT! ALWAYS DEPRESSURIZE THE TANK BEFORE

CARRYING OUT ANY CLEANING AND MAINTENANCE WORK.

• Check the tank for signs of rust and damage each time before

using. Do not use the compressor with a damaged or rusty tank.

Cleaning

• Keep the safety devices free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it with compressed air

at low pressure.

• We recommend that you clean the appliance immediately after you

use it.

• Clean the appliance regularly with a damp cloth and some soft soap.

Do not use cleaning agents or solvents; these may be aggressive to

the plastic parts in the appliance. Ensure that no water can get into

the interior of the appliance.

• You must disconnect the hose and any spraying tools from the

compressor before cleaning. Do not clean the compressor with

water, solvents or the like.

Removing

condensation water

The condensation water must be

drained off each use by opening the

drain plug, at the bottom of the tank.

The drain plug can be opened by

turning the screw in an anti-clockwise

direction.

IMPORTANT! PULL THE MAINS PLUG OUT OF THE

SOCKET AND VENTILATE THE APPLIANCE AND ALL

CONNECTED PNEUMATIC TOOLS. SWITCH OFF THE

COMPRESSOR AND MAKE SURE THAT IT IS SECURED

IN SUCH A WAY THAT IT CANNOT BE STARTED UP AGAIN

BY ANY UNAUTHORISED PERSON.

IMPORTANT! STORE THE COMPRESSOR ONLY IN

A DRY LOCATION WHICH IS NOT ACCESSIBLE TO

UNAUTHORISED PERSONS. ALWAYS STORE UPRIGHT,

NEVER TILTED!

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Compact Air Compressor

Wheels x 2, caps x 2,

at washers x 4, spring

washers x 2, bolts x 2,

nuts x 2, nyloc nuts x 2

Rubber foot, nut,

bolt, washers x 3

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Preset pressure

The minimum and maximum preset

tank pressure can be read from

the tank pressure gauge. This tank

pressure is set at the factory and the

operator should not alter it.

Switch-on pressure 6 bar

Switch-off pressure 8 bar

Note. When the maximum preset

tank pressure is reached, the motor will automatically switch Off. As

the compressed air is used, the pressure will drop until it reaches the

preset minimum pressure, when the minimum pressure is reached

the compressor will turn on again automatically to build up/maintain

pressure.

Fitting the supporting foot

1. Align the hole in the supporting

foot with the hole in the supporting

foot bracket.

2. Insert the bolt through a washer

and then up through the supporting

foot and the hole in the frame.

3. From the inside of the supporting foot

bracket, place the washer, then the

spring washer onto the bolt. Fasten the

assembly in place with the nut (nuts,

bolts and washers supplied).

Switching On/Off

1. Attach the desired tool to the

quick release regulated air

outlet.

2. To switch the compressor On,

pull up the knob.

3. To switch the compressor Off,

press the knob down.

Adjusting the pressure

1. Once set up and On you can adjust

the air pressure by turning the

pressure regulating knob.

2. To increase the air pressure, rotate

the regulating knob clockwise. To

decrease the pressure, rotate the

regulating knob anti-clockwise.

Note. Air must be owing through the

quick release regulated air outlet, and

the attached air tool in order to obtain the

correct output reading on the pressure

gauge.

1. Quick-release regulated air

outlet

2. Transportation handle

3. Pressure regulating knob

4. ON/OFF switch

5. Tank pressure gauge

6. Housing cover

7. Safety valve

8. Outlet pressure gauge

9. Supporting foot bracket

10. Supporting foot

11. Drain plug

12. Tank

13. Intake air lter

14. Wheel bracket

15. Wheel

COMPACT AIR COMPRESSOR

KNOW YOUR PRODUCT

ACP-2415

1. ASSEMBLY 3. TROuBLE ShOOTING2. OPERATION

Pre setup checks

• Examine the machine for signs of transit damage. If damaged, do not

use, contact Ozito .

• The compressor should be set up near the area of use.

• Avoid long air lines and long supply lines (extensions).

• Make sure the intake air is dry and dust-free.

• Do not set up the compressor in damp or wet rooms.

• The compressor may only be used in suitable rooms (with good

ventilation and an ambient temperature from 5°C to 40°C). There must

be no dust, acids, vapours, explosive gases or inammable gases in

the room.

• The compressor is designed to be used in dry rooms. It is prohibited

to use the compressor in areas where work is conducted with sprayed

water. Before you use the machine, make sure that the mains voltage

complies with the specications on the rating plate.

Fitting the wheels

Note. You must fully assemble the

compressor before using it for the rst time.

1. Place a washer onto the bolt and t the

bolt into the wheel. Now t washer and

nyloc nut on the thread of the bolt and

tighten.

2. Insert the wheel bolt through the hole

in the wheel bracket, below the tank.

3 From the inside of the wheel bracket,

place a spring washer on the wheel bolt.

Fasten the wheel bolt in position with a nut

(nuts and washers supplied).

4. Clip the hub cap to the outer

face of the wheel.

5. Repeat steps 1 to 4 with the

second wheel.

SETUP & PREPARATION OPERATION

1 2 3 4 5 6

8 12 13 14 159 10 117

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

Turning Off

1. After the task has been completed,

switch the compressor Off by

pressing down the On/Off knob.

2 Switch off the mains power supply

and remove the electrical plug.

3. Release the remaining compressed air in the tank by use of an air

tool (blow gun etc).

Note: By pulling the ring on the safety

valve outwards, is also suitable

for releasing the remaining

compressed air in the tank.

Release the ring so that the safety

valve closes.

Problem Cause Solution

The compressor

does not start

1. No power supply 1. Check the power

supply, the power

plug and the

socket-outlet.

2. Insufcient supply

power

2. Make sure that

the extension

cable is not too

long.

3. Outside temperature

is too low

3. Never operate

with an outside

temperature of

below 5°c.

4. Motor is overheated 4. Allow the motor

to cool down.

If necessary,

remedy the

cause of the

overheating.

The compressor

starts but there

is no pressure

1. Leak in the non-

return valve

1. Replace the non-

return valve

2. The seals are

damaged.

2. Check the seals

and have any

damaged seals

replaced by a

service centre

3. The drain plug leaks. 3. Tighten the

screw by hand.

check the seal

on the screw

and replace if

necessary.

The compressor

starts, pressure

is shown on the

pressure gauge,

but no pressure to

the air tool.

1. Loose hose

connections

1. Check the

compressed air

hose and tools

and replace if

necessary.

2. Leak in a quick-lock

coupling

2. Check the quick-

lock coupling

and replace if

necessary.

3. Insufcient pressure

set on the pressure

regulator.

3. Open the

pressure

regulator further.

Checking the safety valve

1. Check that the safety valve is in

working order every use. Turn

compressor on until the switch off

pressure (8 bar) is reached.

2. Hold the ring on the safety valve and

pull it outwards. Air should discharge

from the valve.

3. When the ring on the safety

valve is released the air discharge

should stop.

Psi

Bar

180

150

100

Psi

Bar

150

100

Psi

Bar

180

150

100

Psi

Bar

180

150

100

WARNING!: WARNING! DO NO USE THE

COMPRESSOR IF THE SAFETY VALVE DOES NOT

WORK AS DESCRIBED.

WARNING!: WEAR SAFETY GLASSES AND EAR

PROTECTION. KEEP YOUR FACE AWAY FROM THE

SAFETY VALVE WHEN CARRYING OUT THIS CHECK.

AIR WILL BE DISCHARGED AT A HIGH PRESSURE.

WARNING! TAKE CARE WHEN DISCHARGING AIR

THROUGH THE SAFETY VALVE, DRAIN PLUG OR THE

AIR OUTLET. THE DISCHARGE AIR CAN CAUSE DUST,

STONES OR ANY OTHER FOREIGN PARTICLES TO BE

BLOWN THROUGH THE AIR AT HIGH PRESSURE.

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Kompressor
Modell:	ACP-2415
Färg på produkten:	Zwart
Vikt:	200 g
Bredd:	89 mm
Djup:	48 mm
Höjd:	69 mm
Förpackningens vikt:	910 g
Förpackningens bredd:	267 mm
Djuppackning:	191 mm
Förpackningshöjd:	76 mm
Husmaterial:	Metaal
Hållbarhetscertifikat:	RoHS, WEEE
Drifttemperatur (TT):	0 - 50 °C
Harmoniserad systemkod (HS):	85366990
Typ av eluttag:	2 x 3.5 mm + HDMI + VGA
Antal uttag:	4
Spänningsklassificering:	100 - 240 V
Frekvensklassificering:	50/60 Hz