Ozito CDL-1200 Bruksanvisning

Ozito Borrmaskin CDL-1200

Läs nedan 📖 manual på svenska för Ozito CDL-1200 (8 sidor) i kategorin Borrmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
CORDLESS
DRILL
DRIVER
12V Lithium Ion
INSTRUCTION MANUAL
CDL-1200
WHAT’S IN THE BOX
Cordless Drill Driver
ozito.com.au
Charging Adaptor
SPECIFICATIONS
Input: 12V
Chuck Size: 10mm Keyless
No Load Speed: 0-700/min
Torque Setting: 17
Max. Torque: 10Nm
Battery: 1.5Ah Li-ion
Charge Time: 3-5 Hours
Weight: 0.94 kg
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
9 Charging Adaptor 10 Charging Jack
ACCESSORIES
9 10
1 2 3 4 5 6 7 8 3 The light will turn green when
the battery reaches full charge.
NOTE: It will take 4-5 charging cycles before the battery reaches
optimum charge and run time.
NOTE: The light will illuminate red
when the battery has a low level
of charge remaining.
Adjusting Torque
Variable Speed Trigger
1 To start drilling squeeze the
variable speed trigger.
2 To stop drilling release the
trigger.
Note: The more the variable speed trigger is depressed, the faster the
drill bit will rotate.
Turn torque ring to the
desired setting. Refer to
Helpful Tips for determining
desired setting.
Removing a Drill Bit
4 Tighten the chuck by turning
clockwise.
CAUTION: TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.
5. Ensure the bit is rmly in
place.
1. Hold the back sleeve while
turning the front sleeve
clockwise to open chuck.
2. Remove the drill bit.

Produktspecifikationer

Varumärke: Ozito
Kategori: Borrmaskin
Modell: CDL-1200

Behöver du hjälp?

Om du behöver hjälp med Ozito CDL-1200 ställ en fråga nedan och andra användare kommer att svara dig




Borrmaskin Ozito Manualer

Borrmaskin Manualer

Nyaste Borrmaskin Manualer