Ozito PSA-001 Bruksanvisning

Ozito Pomp PSA-001

Läs nedan 📖 manual på svenska för Ozito PSA-001 (6 sidor) i kategorin Pomp. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

PRESSURE

SWITCH

10 BAR

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 220-240V~50Hz

Pump Max: 1.1kW, 10 Amps

Max. Pressure: 10 bar (1 Mpa)

Inlet & Outlet: 25.4mm (1“BSP) Male

Water Temp.: 1ºC to 35ºC

Cable Male Plug: 1.5m

Cable Female Socket: 0.5m

IP Rating: IP65

Weight: 1.7kg

PSA-001

STANDARD EQUIPMENT

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: O-rings, bearing,

seals gaskets.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that specified on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

0518

Pressure Switch

Teﬂon Tape

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1. Discharge outlet

2. LED’s

3. Restart button

4. Brass union (knuckle)

5. Inlet

6. Female socket

7. Male plug

PRESSURE SWITCH

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

WARNING!: ENSURE THE PRESSURE SWITCH

IS DISCONNECTED FROM THE POWER SUPPLY

BEFORE PERFORMING ANY OF THE FOLLOWING

OPERATIONS.

ACCESSORIES

8. Teontape

Connecting the Pressure Switch

1. Screw the pressure switch

brass union to the transfer

pump outlet of a suitable

pump.Tightenrmlywitha

spanner (not included).

Note:Teontapeisrequiredonthreadstoensureawatertight

seal and prevent any leakage.

Connecting to the Pumps Suction Inlet

1. Insert 1” male threaded

adaptor (not included).

Tightenrmlywitha

spanner (not included).

2. Securely attach the

input hose or pipe (not

included) to the other end

of the adaptor. Ensure

you have the correct

diameter hose or pipe that

is compatible with your

water drawing source and

pump.

Primingthepumpisrequiredtopurgeairfromthehose.Don’t

operate the pump without it being primed.

1. Ensure the pump is

switched off at the mains

power.

2. Remove the priming plug

from the top of the pump

housing by turning anti

clockwise.

3. Fill the pump completely

with water. Ensure the

pump and inlet pipe or

hose are full. Replace the priming plug.

4. To fully prime the pump refer to “Starting the pump”.

2. PRIMING THE PUMP

OPERATION

WARNING!: THIS PRODUCT IS INTENDED

FOR PUMPING WATER IN A HOME DOMESTIC

APPLICATION. DO NOT USE IT FOR CORROSIVE,

ABRASIVE, EXPLOSIVE OR DANGEROUS LIQUIDS.

CAUTION. THE PUMP SHOULD BE FILLED WITH

WATER AFTER EACH NEW CONNECTION OR IF WATER

LOSS OR AIR INTAKE HAS OCCURRED. EXTENDED

OPERATION WITHOUT A WATER REFILL WILL DAMAGE

THE PUMP!

Connecting to the Discharge Outlet

1. Insert a 1” female threaded

adaptor (not included).

tightenrmlywitha

spanner.

2. Securely attach the

output hose or pipe (not

included) to the other end

of the adaptor. Ensure

you have the correct

diameter hose or pipe

that is compatible with

your water discharge

application.

Note: The discharge hose or pipe you are using must have a

minimum diameter of 19mm (3/4’’).

Note: Ensure the discharge hose or pipe is not restricted in any

way and nothing is obstructing the hose or pipe when the pump

is in operation.

WARNING!: RISK OF INJURY! IF THE

COMPONENTS ARE NOT COMPRESSION-PROOF

OR IF THEY ARE IMPROPERLY INSTALLED, THE

PRESSURE LINE COULD BURST DURING OPERATION.

Connecting to the Female Socket

1. Connect the pump power

cord plug to the pressure

switch female socket

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Pomp
Modell:	PSA-001
Typ av operation:	Knoppen
Färg på produkten:	Grey, Transparent, White
Inbyggd display:	Nee
Snäll:	Blender voor op aanrecht
Lätt att städa:	Ja
Antal hastigheter:	2
Kraftkälla:	AC
Avtagbar bricka:	Ja
Tillgångar:	350 W
Innehåll behållare/burk:	0.6 l
Antihalkfötter:	Ja
Knivmaterial:	Roestvrijstaal
Lätt att demontera:	Ja
Kapacitet för hackarskål:	0.6 l
AC-ingångsspänning:	220/240 V
AC-ingångsfrekvens:	50/60 Hz