Ozito SBP-0121 Bruksanvisning

Ozito Pomp SBP-0121

Läs nedan 📖 manual på svenska för Ozito SBP-0121 (6 sidor) i kategorin Pomp. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
12V SUBMERSIBLE
BILGE PUMP
1,700 L/H FLOW
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 12V DC
Rated Input Power:36 Watt
Max. Current: 3 Amp
Max. Flow Rate: 1,700 litres/hour
Max. Head: 2 meters
Max. Immersion: 1m
Size of Outlet: ø19mm (3/4”)
Power Cord: 1m
Weight: 0.33kg
SBP-0121
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: strainer,
bearings, seals, gaskets, and all accessories.
WARNING
The following actions will result in the warranty being void.
If the pump has been operated on a supply voltage other
than that specified on the tool.
If the pump shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the pump is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0617
12V Submersible Bilge
Pump
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Power Cord
2. Pump Housing
3. Discharge Outlet
4. Strainer Tabs
5. Strainer
SUBMERSIBLE BILGE PUMP
KNOW YOUR PRODUCT
1. INSTALLATION GUIDE
Pump is suitable for use with fresh and salt water applications.
The pump can be used for portable or permanent applications
Portable Applications
1. Prior to immersing the pump in water
determine the depth of water for the
length of hose required.
Note: Calculate overall hose length to pump
to the desired location
2. Attach a ø19mm hose (not supplied) to
the discharge outlet and fasten with a
stainless steel clamp (not supplied). It
is recommended that you use a good
quality hose that will not kink when
making sharp bends.
3. Determine the desired location for the
pump. It is best located where the water
is potentially deepest, ie., at the lowest
possible level of the area to be drained
4. Ensure that the hose is
positioned in a way that runs
level or continuously upward.
This will eliminate the chance of
air pockets developing.
Note: Restricting the ow from
the pump by using a smaller
hose does not damage the pump
however, it will reduce the ow.
SETUP & PREPARATION
1
2
3
4
5
WARNING!: ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Permanent Applications
1. Determine the desired location and position for the pump. Refer
“Portable Applications”.
2. Remove the strainer from the
bottom of the pump by depressing
the strainer tabs, on both sides of
the pump.
3. Mount the pump on the strainer so
that both lock tabs snap into place.
(the pump may be reversed on these
tabs if so desired).
4. Attach hose. Refer “Portable Applications”
2. WIRING
IMPORTANT!: ENSURE THAT ALL ELECTRICAL WIRING
IS SECURED IN PLACE WITH THE CONNECTIONS WELL
ABOVE THE POTENTIAL WATER LEVEL.
If attaching the strainer to
metal or breglass, rst
mount a wooden block to
the surface, and then fasten
the strainer to the wooden
block.
CAUTION: THE STRAINER MUST ALWAYS BE
PROPERLY INSTALLED BEFORE ATTACHING AND
RUNNING PUMP.
If attaching the strainer to
wood, fasten with stainless
steel screws (not included).
Wiring for Manual Operation
The manual system is the simplest system but it only provides
ON-OFF control of the pump. Consequently, pumps are often left ON
longer than necessary.
PANEL
SWITCH
CONNECTORS
BATTERY
12V
SUBERSIBLE
PUMP FUSE
3 Amp
RED wire − positive (+)
BLACK wire − negative (−)
If battery is grounded, the fuse should be connected to the positive
(red wire +) side.
WARNING!: ALL ELECTRICAL CONNECTIONS MUST BE
PROPERLY INSULATED TO PREVENT SHORT CIRCUITS.

Produktspecifikationer

Varumärke: Ozito
Kategori: Pomp
Modell: SBP-0121

Behöver du hjälp?

Om du behöver hjälp med Ozito SBP-0121 ställ en fråga nedan och andra användare kommer att svara dig




Pomp Ozito Manualer

Pomp Manualer

Nyaste Pomp Manualer