Ozito PXBMK-4047SP Bruksanvisning

Ozito Gräsklippare PXBMK-4047SP

Läs nedan 📖 manual på svenska för Ozito PXBMK-4047SP (13 sidor) i kategorin Gräsklippare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

PXBMS-3647SP

Brushless Lawn Mower

Safety Key & Cable Clips

Top Handle

Lower Handle

Handle Assembly Fasteners &

Spanner

STANDARD EQUIPMENT

WARRANTY

0523

SELF-PROPELLED

LAWN MOWER

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 2 x 18V

Cutting Diameter: 460mm (18”)

Cutting Heights: 25 - 80mm, 9 position

No Load Speed: 2,900/min

Grass Catcher: 50 litres

Noise Rating: 96dB

Tool Weight: 23kg

ozito.com.au

BRUSHLESS

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING

YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer service helpline

above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example: wheels, blade,

cord clips, bearings etc.

OZITO. 25 Fox Drive, Dandenong South, Victoria 3175, Australia

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

11. Safety Key

12. Cable Clip x 3

13. Nut x 4

14. Upper Handle Knob x 2

15. Round Head Bolt-Short x 2

16. Round Head Bolt-Long x 2

17. Spanner

18. CSK Bolt x 2

1. Wheel Drive Lever

2. Top Handle

3. Safety Switch

4. Start/Stop Motor Lever

5. Grass Catcher

6. Lower Handle

7. Catcher Flap

8. Battery Cover

9. Cutting Height Adjustment Lever

10. Cutting Deck

BRUSHLESS LAWN MOWER

KNOW YOUR PRODUCT

192 3

567 8

1. ASSEMBLY

SETUP & PREPARATION

1. Place the lower handle over the

outside of the mower handle

brackets aligning the upper holes

in the handle and each bracket.

Fit the CSK bolt through mounting

brackets then through hole in each

side of lower handle.

Fitting the Lower Handle

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

BATTERIES ARE DISCONNECTED BEFORE PERFORMING

ANY OF THE FOLLOWING TASKS.

ACCESSORIES

2. There are three holes

remaining in each bracket,

select the appropriate hole for

the height of the user.

BATTERY & CHARGER

This tool is compatible with all batteries and chargers from

the Ozito PXC Range.

Fitting the Upper Handle

1. Place the upper handle

over the lower handle.

Fit long round head bolts

through the lower handle

and then through the

upper handle.

3. Fit the short round head bolt

through the brackets and then

through the lower handle.

Secure each bolt with the 4

nuts and spanner provided.

2. Secure knobs over

the protruding ends

of the bolts.

13 14 16 17 18

2. PREPARATION

1. Carefully lift open the battery

cover from the front and slide

two batteries of the same

capacity and same charge

state into the front mounts,

aligning the ribs so that they

click into place.

2. Insert the safety key.

(If the mower is not going to be

used immediately, do not insert

the safety key.)

1. Lift up the grass catcher ap

with one hand and guide the

catcher with your other hand

over the two hooks on the

mower housing.

3. To remove, raise the grass catcher ap and lift the grass catcher out. 3. Carefully close the battery

cover.

2. Lower the grass catcher and

allow it to sit in place. Lower

the grass catcher ap.

Inserting the Batteries & Safety Key

Adjusting the Cutting Height

Securing the Cord

WARNING! ONLY FIT AND REMOVE THE GRASS

CATCHER WHEN THE MOWER IS SWITCHED OFF AND

THE MOTOR HAS COME TO A STOP.

Note: The grass catcher

ap is held against the grass

catcher by a spring.

The cutting height adjustment lever provides 9 cutting heights from

25mm - 80mm.

1. Pull lever outwards away from

the mower body.

2. Adjust until the required

cutting height is selected.

3. Release lever and check

that it is securely seated in

the required cutting height

position.

Only use 2 batteries with the same capacity. For best performance

use 3.0Ah batteries and above. Always use 2 batteries with the same

charge state with the mower.

WARNING! WHEN FITTING THE GRASS CATCHER AFTER

EMPTYING, ALWAYS ENSURE THERE IS NO BUILD UP

OF GRASS IN THE GRASS CHUTE.

Grass Catcher Indicator

The grass catcher is tted with an

indicator at the rear of the catcher

to help identify when to empty.

When in operation the indicator

oats up when the catcher is

empty. If the indicator drops down

then the grass catcher is full and

needs emptying.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

BATTERIES ARE DISCONNECTED BEFORE PERFORMING

ANY OF THE FOLLOWING TASKS.

Fitting and Removing the Grass Catcher

Ensure the cord follows the

inside of the handles smoothly

from the switch to the body of

the mower.

1. Place the supplied cord

clips over the cord. Push

the cord clip onto the

handle to secure in place.

WARNING! ALWAYS ENSURE THE SAFETY KEY AND ALL

BATTERIES ARE REMOVED WHEN NOT IN USE.

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Gräsklippare
Modell:	PXBMK-4047SP
Färg på produkten:	Zwart
Bredd:	133.35 mm
Typ av förpackning:	Blister
Internminne:	8 GB
Internminnestyp:	DDR4
ETC:	Nee
Klockhastighetsminne:	2400 MHz
Minnesformfaktor:	288-pin DIMM
Typ av kylning:	Koelplaat
Komponent för:	Pc/server
Minneslayout (moduler x storlek):	1 x 8 GB
Typ av buffrat minne:	Unregistered (unbuffered)
Minnesspänning:	1.2 V
Drifttemperatur (TT):	0 - 85 °C
CAS latens:	15
BLAD ID:	5908267910948