Ozito PXJBGK-4020 Bruksanvisning

Ozito Lövblåsare PXJBGK-4020

Läs nedan 📖 manual på svenska för Ozito PXJBGK-4020 (10 sidor) i kategorin Lövblåsare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
STANDARD EQUIPMENT
PXJBS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 13,000 - 18,000/min
Max. Air Speed: 200km/h
Max. Air Volume: 670m/hour (394 CFM)
Noise Rating: 104dB
Weight: 2.15kg
ozito.com.au
1222
Brushless Jet Blower
Blower Nozzle
JET BLOWER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other than that specied
on the tool.
If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
a b
b
Installing the Nozzle
1. Slide the nozzle over the
blower outlet as far as it will
go, aligning the nozzle grove
(a) with the raised tab (b) on
the outlet of the jet blower
as you do this.
2. Rotate the nozzle to lock the
raised tab (b) in place.
1. Nozzle
2. Speed Control
3. Sure Grip Handle
4. On/Off Switch
5. Battery Seating
6. Air Intake
7. Scraper Ring
This tool is compatible with all batteries & chargers from the Ozito
Power X Change range.
BRUSHLESS JET BLOWER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3 4 5 6
7
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! THE NOZZLE MUST BE TURNED AS FAR
AS IT WILL GO AND LOCK INTO PLACE TO ENSURE
IT IS FIRMLY SECURED IN POSITION.
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
ab
NN
PERFORMANCE
SPEED
TURBO
PERFORMANCE
SPEED
TURBO
N
N
PERFORMANCE
SPEED
TURBO
2. INSERTING & REMOVING THE BATTERY 3. CONTROLS
OPERATION
Inserting the Battery
1. Align the ribs of the battery
with the recess in the rear
of the jet blower and push in
until it clicks into place.
WARNING! BEFORE INSERTING THE BATTERY
ENSURE THE TOOL IS SWITCHED OFF.
Removing the Battery
1. Press and hold the battery release tab (a) and then slide the battery out
(b).
WARNING! DO NOT SWITCH THE JET BLOWER ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
Switching On & Off
When the on/off switch is
pressed into the housing
on the right - ON position,
the jet blower will be
switched on and the air
velocity will be at its
lowest level.
When the on/off switch is
pressed into the housing
on the left - OFF position,
the jet blower will be
switched off . Always use
this position when you are
not working with the jet
blower.
Speed Control
Switching on the jet blower,
the air velocity will be at its
lowest level.
You can increase the air
velocity by pressing the
SPEED button. Each bar on
the display will illuminate
according to the air velocity
selected. Up to 4 bars can be
selected for the highest air
velocity.
Note: If you press the SPEED push button again when the highest air
velocity is active, the equipment will return to the lowest air velocity.
Note: To minimize noise and prolong battery operating time, always use
the speed which is actually required and never run at a speed which is
faster than necessary.

Produktspecifikationer

Varumärke: Ozito
Kategori: Lövblåsare
Modell: PXJBGK-4020

Behöver du hjälp?

Om du behöver hjälp med Ozito PXJBGK-4020 ställ en fråga nedan och andra användare kommer att svara dig




Lövblåsare Ozito Manualer

Lövblåsare Manualer

Nyaste Lövblåsare Manualer