Ozito PXRHK-200 Bruksanvisning

Ozito Borrmaskin PXRHK-200

Läs nedan 📖 manual på svenska för Ozito PXRHK-200 (12 sidor) i kategorin Borrmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
SPECIFICATIONS
Input: 18V
Chuck Type: SDS+
No Load Speed: 1,200/min
Impact Power: 1.2J
Impact Rate: 0-5,700bpm
Max. Torque: 10Nm
Weight (Tool Only): 1.35kg
CORDLESS ROTARY
HAMMER DRILL
INSTRUCTION MANUAL
ozito.com.au
PXRHS-300
WHAT’S IN THE BOX
Cordless Rotary
Hammer Drill
Battery & Charger
sold separately
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0316
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING (sold separately)
1 SDS+ Accessory Holder
2 Accessory Locking Sleeve
3 Mode Selector
4 Front Handle
5 LED Worklight
6 Variable Speed trigger
7 Forward/Reverse Lever
8 Sure Grip Rear Handle
CORDLESS ROTARY HAMMER DRILL
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
1 2 3 4 5 6 7 8
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
2. BATTERY INSTALLATION
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Installing the Battery Pack
1 Slide the battery into the drill base until it clicks into place.
Removing the Battery Pack
1 Hold down the battery release button.
2 Slide the battery out.

Produktspecifikationer

Varumärke: Ozito
Kategori: Borrmaskin
Modell: PXRHK-200

Behöver du hjälp?

Om du behöver hjälp med Ozito PXRHK-200 ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Ozito Manualer

Ozito

Ozito BDP-500 Bruksanvisning

15 Oktober 2024
Ozito

Ozito PXDDS-200 Bruksanvisning

30 September 2024
Ozito

Ozito PXRHK-200 Bruksanvisning

26 Augusti 2024
Ozito

Ozito PXDDK-070U Bruksanvisning

26 Augusti 2024
Ozito

Ozito ZLHDK-150U Bruksanvisning

25 Augusti 2024
Ozito

Ozito PXDDK-070 Bruksanvisning

24 Augusti 2024
Ozito

Ozito PXBIS-320 Bruksanvisning

16 Augusti 2024
Ozito

Ozito HDR-3000 Bruksanvisning

15 Augusti 2024
Ozito

Ozito PXDDK-200 Bruksanvisning

12 Augusti 2024
Ozito

Ozito SHD-3100 Bruksanvisning

7 Augusti 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Black And Decker

Black And Decker PF126 Bruksanvisning

27 Oktober 2024
Bosch

Bosch GSR 120-LI Professional Bruksanvisning

24 Oktober 2024
Bosch

Bosch gsr 18 2 li Bruksanvisning

23 Oktober 2024
Vonroc

Vonroc CD510DC Bruksanvisning

21 Oktober 2024
Einhell

Einhell TC-CD 18/35 Li Bruksanvisning

20 Oktober 2024
Einhell

Einhell Herocco Solo Bruksanvisning

19 Oktober 2024
DeWalt

DeWalt dc987ka Bruksanvisning

19 Oktober 2024
AEG

AEG KH 28 Super XE Bruksanvisning

18 Oktober 2024
MSW

MSW -DDM255 Bruksanvisning

16 Oktober 2024
MSW

MSW -DDM152 Bruksanvisning

16 Oktober 2024