Ozito PXRHS-300 Bruksanvisning

Ozito Slagborrar PXRHS-300

Läs nedan 📖 manual på svenska för Ozito PXRHS-300 (6 sidor) i kategorin Slagborrar. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

SPECIFICATIONS

Input: 18V

Chuck Type: SDS+

No Load Speed: 1,200/min

Impact Power: 1.2J

Impact Rate: 0-5,700bpm

Max. Torque: 10Nm

Weight (Tool Only): 1.35kg

CORDLESS ROTARY

HAMMER DRILL

INSTRUCTION MANUAL

ozito.com.au

PXRHS-300

STANDARD EQUIPMENT

Cordless Rotary

Hammer Drill

Grease Tub

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0120

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. BATTERY INSTALLATION

1 SDS+ Accessory Holder

2 Accessory Locking Sleeve

3 Mode Selector

4 Front Handle

5 LED Worklight

6 Variable Speed trigger

7 Forward/Reverse Lever

8 Sure Grip Rear Handle

CORDLESS ROTARY HAMMER DRILL

1 2 3 4 5 6 7 8

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

This tool is compatible with all battery and chargers from the Ozito

Power X Change Range.

Installing the Battery Pack

1 Slide the battery into the drill base until it clicks into place.

Removing the Battery Pack

1 Hold down the battery release button.

2 Slide the battery out.

2. SDS+ ACCESSORY FITMENT 3. CONTROLS

OPERATION

Accessory

SDS+

1. Prior to inserting into chuck,

ensure the SDS+ accessory is

clear of dust and debris.

4. Rotate until accessory is inserted as

far as possible into locking sleeve.

5. Check SDS+ accessory is locked. Try

to pull it out. Note: It should have

approximately

10 – 20mm movement.

This is normal.

2. Prior to inserting into drill add

lubricant to the SDS+ accessory.

3. Insert SDS+ Accessory into

locking sleeve.

Note: The locking sleeve

should not be pulled back when

inserting accessory.

6. To remove the SDS+ accessory pull

back the locking sleeve and pull

accessory out.

1. Choose an

operation mode:

Hammer Drill

Rotate the mode selector to the hammer and

drill icon. This setting is recommended for use

when drilling holes in concrete and other masonry

products. The hammer action will be in operation

while simultaneously the drill bit rotates.

Drilling

Rotate the mode selector to the drill icon. This

setting is recommended for use when you desire the

accessory to rotate without hammer action. Ideal for

drilling into timber or steel when correct accessories

for such materials are used.

WARNING! PRIOR TO CHANGING MODES,

THE VARIABLE SPEED TRIGGER SHOULD BE

RELEASED AND THE DRILL SHOULD HAVE

COME TO A COMPLETE STOP.

Mode selector

WARNING! WEAR GLOVES WHEN HANDLING

GREASE.

Note: This product is not intended for driving

screws.

WARNING! TO REDUCE THE RISK OF INJURY

WE RECOMMEND THE USE OF GLOVES WHEN

HANDLING DRILL BITS.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

THE BATTERY IS REMOVED BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Slagborrar
Modell:	PXRHS-300
Färg på produkten:	Roze
Material:	Polybutylene terephthalate (PBT)
Antal per paket:	120 stuk(s)
Varumärkeskompatibilitet:	Razer
Typ av enhet:	Toetsenbord
Typ produkt:	Toetsenbordkapje