Ozito RHD-1600 Bruksanvisning

Ozito Borrmaskin RHD-1600

Läs nedan 📖 manual på svenska för Ozito RHD-1600 (6 sidor) i kategorin Borrmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

ROTARY

HAMMER

DRILL KIT

1600W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 1600W

Impact Power: 4 Joule

Impact Rate: 3,900 bpm

No Load Speed: 800/min

Accessory Fitment: SDS+

Drilling Capacities: Masonry 32mm

RHD-1600

WHAT’S IN THE BOX

Kit Box

Rotary Hammer Drill

Side Handle

Accessories

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ozito.com.au

0517

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance

with the terms of this warranty. Warranty excludes consumable

parts, for example: carbon brushes, included accessories etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

KNOW YOUR PRODUCT

1. USING THE DEPTH ROD

The depth rod allows you to drill to a predetermined depth.

1 Loosen the depth rod

securing nut then insert

depth rod.

4 Drill the hole until

the end of the

depth rod touches

the workpiece.

3 Tighten the depth

rod securing nut to

lock the depth rod

into place.

2 Adjust the depth

rod so the drill bit

extends beyond the

end of the depth

rod to the required

drilling depth.

SETUP & PREPARATION

WARNING! ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS.

1 SDS+ Accessory Holder

2 Accessory Locking Sleeve

3 Depth Rod Locking Hole

4 Side Handle

5 Side Mode Selector

6 Grease Cap

7 Rear Mode Selector

8 On/O󰀨Switch

9 Rear Handle

ROTARY HAMMER DRILL

10 Depth Rod

11 3 x SDS+ 150mm Drill Bits

12 1 x SDS+ Flat Chisel

14 x 250mm

13 1 x SDS+ Point Chisel

14 x 250mm

14 Dust Cover

15 High Temperature Grease

16 Pin Spanner

ACCESSORIES

10 12 13 14 15 1611

2 3 4 5 6 7 8 9

Required

Drilling

Depth

2. SDS+ ACCESSORIES 3.

FITTING AND USING THE DUST COVER

1 Slide dust cover over

accessory.

2 Add lubrication grease.

The cover catches dust and debris - while using the drill upright or

overhead - to avoid dust entering the air vents.

1 Prior to insertion into

chuck, ensure the SDS+

accessory is clear of

dust and debris.

3 Pull locking sleeve back

and hold.

5 Rotate and continue to

insert as far as possible.

7 Checked SDS+ accessory

is locked. Try to pull it out.

Note: It should have approx

10 – 20mm movement. This

is normal.

2 Prior to insertion into

drill add supplied

lubricant to the SDS+

accessory.

4 Insert SDS+ Accessory.

6 Release locking sleeve.

8 To remove the SDS+

accessory pull back the

locking sleeve and pull

accessory out.

Accessory

SDS+

3 Insert drill bit in locking

sleeve.

4 Press dust cover to the

end of locking sleeve.

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Borrmaskin
Modell:	RHD-1600
Färg på produkten:	Grijs
Vikt:	620 g
Bredd:	165 mm
Djup:	120 mm
Höjd:	45 mm
Kompositvideoingång:	1
Inspänning:	12 V
Rackmontering:	Ja
Kompositvideoutgång:	5
Signal-brusförhållande:	73 dB
Bandbreedte:	480 MHz
Maximal effektnivå:	2 Vpp
Differentialfasning:	0.12 °
Differentiell vinst:	0.05 procent
K-faktor:	0.05 procent