PAC APH-TY01 Bruksanvisning

PAC hi-fi system APH-TY01

Läs nedan 📖 manual på svenska för PAC APH-TY01 (2 sidor) i kategorin hi-fi system. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Speaker Connection Harness for Select

Toyota Vehicles with Factory Ampliers

Equipped with a 10-Pin and 12-Pin Connector

Page 1

PAC-audio.com

APH-TY01

Rev: V1

Date: 010419

Introduction and Features

The APH-TY01 simplies speaker wire connections when adding aftermarket ampliers. Aftermarket ampliers can be

easily added with no need to cut or modify a vehicle’s original wiring. Each pair of wires has been labeled with the

corresponding speaker name.

Wiring Overview

Harness 1 (APH-TY01 12P):

Installation Notes

1. It is always best to use a tone generator (PAC part number TL-PTG2) to verify that the tables in this manual, and the labels

on the wires, match the wiring in your specic vehicle. This is important as there are instances where different trim levels of

the factory system may have the speaker outputs in different locations.

2. Not all applicable vehicles will come equipped with a corresponding speaker for all of the wires populated in our harness. It is

important to understand which speakers are equipped in your vehicle.

3. If you are leaving any of the factory speakers connected to the factory amplier, simply connect the speaker wires (color for

color) between the male and female connectors. For example: If you want the rear speakers to be powered by the factory

amplier, simply connect the Green, Green / Black, Purple and Purple / Black wires from the male connector to the Green,

Green / Black, Purple and Purple / Black wires from the female connector.

4. For vehicles that lose audio output when there is no load on the speaker outputs of the factory amplier, PAC load resistors

will be required (PAC Part Number LR335 or LR475).

1. Locate the vehicle’s factory amplier and disconnect the 10-pin and 12-pin connectors.

2. Connect the APH-TY01 harness to the connectors that were disconnected in the previous step.

3. Connect the male connectors from the APH-TY01 to the amplier.

4. Connect the longer loose wires from the APH-TY01 to your aftermarket amplier outputs or passive crossovers according to

the tables in this manual.

5. Insulate unused wires in the 10-pin and 12-pin connectors that plug into the factory amplier side of the APH-TY01.

Installation Steps

Connect to aftermarket amplier

output or passive crossover.

*Illustration is for reference only.

Your harness will have more wires*

PinNumber WireColor Description Label

1 Black PassThrough(Ground)

6 Brown PassThrough(Ground)

2 Black PassThrough

3 Brown PassThrough

4 Gray FrontRight+

10 Gray/Black FrontRight‐

11 Orange Speaker3+

5 Orange/Black Speaker3‐

12 Blue Speaker4+

7 Blue/Black Speaker4‐

9 White FrontLeft+

8 White/Black FrontLeft‐

N/A

FRSpeaker

Speaker3

Speaker4

FLSpeaker

12‐Pin

Insulate any unused wires

APH-TY0112P

Speaker1

Speaker2

RRSpeaker

RLSpeaker

White / Black

White

Gray / Black

Orange

Blue

Black

Brown

Gray

Orange / Blac

Blue / Black

Black

Brown

Gray

ange / Black

Blue / Black

White / Black

White

Gray / Black

Orange

Blue

Speaker Connection Harness for Select

Toyota Vehicles with Factory Ampliers

Equipped with a 10-Pin and 12-Pin Connector

Page 2

PAC-audio.com

APH-TY01

Rev: V1

Date: 010419

Wiring Overview (cont.)

Harness 2 (APH-TY01 10P):

Connect to Aftermarket amplier

output or passive crossover.

*Illustration is for reference only.

Your harness will have more wires*

PinNumber WireColor Description Label

1 Yellow PassThrough(Constant12v+)

7 Yellow PassThrough(Constant12v+)

8 Red Speaker1+

2 Red/Black Speaker1‐

4 Brown Speaker2+

3 Brown/Black Speaker2‐

9 Green RearLeft+

5 Green/Black RearLeft‐

6 Purple RearRight+

10 Purple/Black RearRight‐

N/A

Speaker1

Speaker2

RLSpeaker

RRSpeaker

10‐Pin

Insulate any unused wires

APH-TY0110P

Speaker3

Speaker4

FRSpeaker

FLSpeaker

Yellow

Red / Black

Brown

Green / Black

Purple

Brown / Black

Red

Green

Purple / Black

Red / Black

Brown

Green / Black

Purple

Brown / Black

Yellow Yellow Yellow

Red

Green

Purple / Black

Produktspecifikationer

Varumärke:	PAC
Kategori:	hi-fi system
Modell:	APH-TY01
Färg på produkten:	Zwart
Skärm diagonal:	26 "
Upplösning:	1920 x 1200 Pixels
Pekskärm:	Nee
Original bildförhållande:	16:10
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Typiskt kontrastförhållande:	1000:1
VGA (D-Sub) port(ar):	1
Monteringsalternativ för kabellås:	Ja
Kabellåsspårtyp:	Kensington
Inbyggda högtalare:	Nee
Strömförbrukning (i standby):	2 W
Certifiering:	UL/cUL, CE, FCC-B
Display, antal färger:	16.78 miljoen kleuren
HDCP:	Ja
HD typ:	Niet ondersteund
Ingångsström:	Ja
3D:	Nee
Respons tid:	5 ms
Pixelpitch:	0.2865 x 0.2865 mm
Grafikupplösningar som stöds:	1920 x 1200 (WUXGA)
VESA montering:	Ja
Panelmonteringsgränssnitt:	200 x 100 mm
DVI-D-portar:	1
Ljusstyrka (typiskt):	400 cd/m²
Bildförhållande:	16:10
RGB färgrymd:	sRGB
Integrerad TV-tuner:	Nee
Inbyggd kamera:	Nee
Djup (utan bas):	95 mm
Höjd (utan bas):	387.6 mm
Bredd (utan bas):	594.1 mm
Vikt (utan bas):	11200 g
Enhetsbredd (med stativ):	594.1 mm
Djupenhet (med stativ):	273.57 mm
Enhetshöjd (med stativ):	457.2 mm
Antal USB Type-A nedströmsportar:	1
Version USB-hubb:	2.0
Tunn klient installerad:	Nee
Kompatibilitet:	PC, Mac
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	60 Hz
Strömförbrukning (typiskt):	135 W