PAC LPHTY01 Bruksanvisning

PAC Inte kategoriserad LPHTY01

Läs nedan 📖 manual på svenska för PAC LPHTY01 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

PAC-audio.com

Rev.7

1/5/2022

LPH Harness Instruction Guide

Wiring Connection Chart (All Models)

MODELS:

• LPA-E4

• LPA2.4 / LPA2.2

• LPA1.4 / LPA1.2

Important Note: This harness is provided

with a inline fuse installed. Please remove

prior to install and reinsert once nished.

If your vehicle does not provide ACC

source your harness will not have a

"RED" wire to connect.

It will use DC O󰀨set to turn on as well

as trigger the "REM OUT" on the LPA.

On LPA-E4 there will be a jumper that

you can move based on your application.

This harness is designed to work on

OEM NON-AMPLIFIED systems.

Connect the RED BUTT Connector to

the aftermarket system turn on for your

ampliers.

Fully open terminals

before inserting wire.

PAC-audio.com

Rev.7

1/5/2022

LPH Harness Instruction Guide

Example Installation - 4-Channel Amplier - (HARNESS CUT REQUIRED)

Example Installation - Mono Amplier - (HARNESS CUT NOT REQUIRED)

RCA FROM LPA

"CUT HERE

AND INSULATE"

• Cut the harness close as possible to the

"CUT HERE AND INSULATE" label. You

must insulate wires to prevent damage to

OEM radio.

• The cut speaker wires will need to be

connected to your aftermarket amplier.

(REFER TO LABEL ON HARNESS)

• Please refer to the chart on the rst page

for wiring your loose wires to your LPA.

• This harness is designed to work on OEM

NON-AMPLIFIED systems.

OEM RADIO HARNESS

LPH TO RADIO CONNECTION

LOOSE WIRES TO LPA

REM OUT FROM LPA

DO NOT CUT!!

• If using a 2-Channel input LPA

use the front speaker wires

and insulate the remaining rear

speaker wires.

• DO NOT CUT the speaker wires

inbetween the "CUT HERE"

Lables in order to keep the

factory speakers functional.

• This harness is designed to

work on OEM NON-AMPLIFIED

systems.

OEM RADIO HARNESS

LOOSE WIRES TO LPA

"CUT HERE AND

INSULATE"

"CUT HERE AND CONNECT TO

AFTERMARKET AMPLIFIER"

LPH TO RADIO CONNECTION

RCA FROM LPA

REM OUT FROM LPA

AFTERMARKET AMPLIFIER

"CUT HERE AND CONNECT TO

AFTERMARKET AMPLIFIER"

(CUT SPEAKER WIRES)

ANC vs Amplifier

ANC Module

Amplifier

Actually silver in the vehicle Actually black in the vehicle

Produktspecifikationer

Varumärke:	PAC
Kategori:	Inte kategoriserad
Modell:	LPHTY01
Färg på produkten:	Zwart
Bredd:	170 mm
Djup:	162 mm
Höjd:	40 mm
Processorfrekvens:	880 MHz
Inkluderar AC-adapter:	Ja
Antal USB 2.0-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Strömförbrukning (max):	24 W
Internminne:	128 MB
Typ processor:	Ja
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Typ av antenn:	Intern
Flashminne:	16 MB
Maximal dataöverföringshastighet:	300 Mbit/s
2,4 GHz:	Ja
Power over Ethernet (PoE):	Ja
Maximal dataöverföringshastighet (2,4 GHz):	300 Mbit/s
AC-ingångsspänning:	12 - 30 V
Drifttemperatur (TT):	-40 - 70 °C
Antal-produkter-ingår:	1 stuk(s)
Harmoniserad systemkod (HS):	85176990