PAC TOYK969 Bruksanvisning

PAC Inte kategoriserad TOYK969

Läs nedan 📖 manual på svenska för PAC TOYK969 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
TOYK969 Mounting Kit
Toyota
2007-14 FJ CRUISER
2007-14 YARIS (Excluding radio w/2”x4” LCD display)
Scion
2004-06 xA
2004-14 xB
2008-14 xD
2005-10 TC
VEHICLE APPLICATIONS
iTOYK969 ©2015 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 10/14 PRINT Ver. 04/15
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
For information about other American International automotive
accessories visit our website at:
http://www.aius.net
1
DIN MOUNT INSTRUCTIONS
1. Follow instructions from steps 1&2 of ISO mount instructions below.
2. Insert DIN sleeve from your new radio into the upper section of the installation kit.
(This DIN sleeve comes with all new radios and slides off the back of the radio)
3. Depress the tabs from inside the sleeves opening upward, outward, and downward
to secure sleeve to the installation kit.
4. Install radio into sleeve and lock into place.
Optional use Trim Ring (ITR-969) may be used on some radios if desired.
Due to the movement of some faces on some radios our ISO Trim Ring may not be able
to be used. You may also ISO mount your radio. Your new radio must have a trim ring
around the face of the radio that is designed to be easily removed. Consult your radio
ownerʼs manual.
ITR-969
Trim Ring
(Optional Use)
ISO MOUNT INSTALLATION INSTRUCTIONS
Not e: Some radio faces are larger in size than the ITR-969 Trim Ring allows.
You may need to file the Trim Ring opening larger for some radios.
1. Attach the left and right side brackets to the main bracket. See illustration below.
2. Attach left and right side brackets to the rear of the pocket using screws supplied w/kit.
3. Attach ISO Mount Spacers to the inside of upper section on
both Left & Right mounting brackets as shown in Figure A.
4. Slide radio into kit from rear & attach to ISO mounting
brackets using screws supplied with radio (do not tighten
screws at this time). (Be sure the length of the screws
DO NOT touch any electrical parts inside radio, some
screws may need to be shortened.)
5. Slide radio forward or backward for your desired look and
then tighten the mounting screws. Use ISO trim ring
when possible.
NOTE: Optional ISO trim ring (ITR-969 included)
may be used in place of after-market radioʼs
trim ring. For ISO mount applications,
mount after-market radio
to side brackets using
hardware included. ITR-969
Trim Ring
(Optional Use)
Fig. A
DINSleeve
10
1. Carefully unclip and remove the soft trim piece from around the radio, airbag
light/hazard button and passenger side air vent.
2. Carefully unclip and pry forward the radio trim bezel.
3. Remove the (4) Phillips screws securing the radio to the sub-dash.
4. Pull radio forward, disconnect the attached wire harness and antenna lead
and remove radio.
DASH DISASSEMBLY
2012-14 TOYOTA YARIS
KIT ASSEMBLY
FOR ISO or DIN MOUNT APPLICATIONS SEE PAGE 1
REMOVE SHADED MOUNTING
TABS ON BOTH LEFT AND
RIGHT SIDES OF KIT
1. Prepare mounting brackets as shown below.
ATTACH BRACKETS TO REAR OF
POCKET USING SCREWS SUPPLIED
FOR ISO or DIN MOUNT APPLICATIONS SEE PAGE 1
KIT ASSEMBLY
KEEP SHADED MOUNTING TABS
ON BOTH LEFT AND RIGHT
BRACKETS.
REMOVE ALL OTHERS.
Optional use
ITR 969
IMB 969L
IMB 969R
1. Prepare mounting brackets as shown below.
ATTACH BRACKETS TO REAR OF
POCKET USING SCREWS SUPPLIED
FOR ISO or DIN MOUNT APPLICATIONS SEE PAGE 1
KIT ASSEMBLY
REMOVE SHADED MOUNTING
TABS ON BOTH LEFT AND
RIGHT BRACKETS
Optional use
ITR 969
IMB 969L
IMB 969R
2
1. Carefully pull outward on the left and right (rotary) climate control knobs
and remove the phillips screw from behind each knob.
2. Carefully unclip and remove the side trims from beside the climate
controls, ashtray, and pocket.
3. Remove the (2) phillips screws securing the lower edges of the climate control/radio
trim bezel to the sub-dash.
4. Carefully pry outward on the Climate control/radio trim bezel, disconnect all
harnesses and remove trim bezel.
5. Remove the (4) Phillips screws securing the factory radio to the sub-dash.
Carefully pull radio forward, disconnect the wire harness and antenna
lead from the radio and remove radio.
DASH DISASSEMBLY
2004-06 TOYOTA SCION xA
9
1. Carefully unsnap the rectangle bezel surrounding the factory radio
2. Remove (4) 10mm bolts securing the factory radio in
3. Disconnect all harnesses and remove radio from dash
DASH DISASSEMBLY
2008-14 TOYOTA SCION xB

Produktspecifikationer

Varumärke: PAC
Kategori: Inte kategoriserad
Modell: TOYK969

Behöver du hjälp?

Om du behöver hjälp med PAC TOYK969 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad PAC Manualer

PAC

PAC RP4-GM31 Bruksanvisning

26 September 2024
PAC

PAC NU-GM51 Bruksanvisning

26 September 2024
PAC

PAC NAV-1129 Bruksanvisning

26 September 2024
PAC

PAC LP7-2R Bruksanvisning

26 September 2024
PAC

PAC LP7-4 Bruksanvisning

26 September 2024
PAC

PAC GMK367B Bruksanvisning

26 September 2024
PAC

PAC CP1-FRD1 Bruksanvisning

26 September 2024
PAC

PAC C2A-CHY5 Bruksanvisning

26 September 2024
PAC

PAC NU-GM3 Bruksanvisning

26 September 2024
PAC

PAC CP1-TSL1 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024