Panasonic RX-D13 Bruksanvisning

Panasonic Stereoapparater RX-D13

Läs nedan 📖 manual på svenska för Panasonic RX-D13 (8 sidor) i kategorin Stereoapparater. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

Before connecting, operating or adjusting this

product, please read these instructions completely.

Please keep this manual for future reference.

Power sources

The unit can be powered with household AC power or dry cell batteries (not included).

Insert memory batteries (not included) to save stored CD programs and radio stations. Memory back-up

Insert batteries (not included) to save CD pro-

grams and radio stations you have set. If memory

batteries are not used, memory items are erased

in the following situations.

• Power failures,

• The power cord is disconnected from the power

outlet,

• The power cord is connected to the unit while

the unit is being powered by batteries.

(R6/LR6, AA, UM-3)

When to change the batteries

The batteries last about a year.

Connect the unit to AC power before replacing

the batteries.

Removing the batteries

Press the negative end of the number 4 battery

and remove the batteries. (Remove the power

batteries ﬁrst.)

P PC

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

Using a household AC outlet

Connect the power cord ﬁrmly to the unit and the

outlet.

• Before connecting or disconnecting the cord,

stop the tape and switch [ ] to “TAPE/

” to turn the power oﬀ. The memory bat-

teries are worn out faster if the cord is discon-

nected with the power still on.

•Conserving power

The unit consumes 1W even when it is turned

oﬀ with [ ]. To save power when the

unit is not to be used for a long time, unplug it

from the household AC outlet. Remember to

reset the radio stations and any other memory

items before using the unit again if you haven’t

inserted memory batteries.

Using batteries

The unit cannot be powered by batteries if the

power cord is connected.

(R20/LR20, D, UM-1)

When to change the batteries

Sound quality and operations are aﬀected when

the batteries are running low. Replace all six

batteries. It is also a good idea to replace all the

batteries before recording.

Removing the batteries

Open the battery cover

and insert your ﬁnger in

the hole on the bottom

of the unit and push out.

RQT5685-2P

Household AC outlet

(AC 120

V, 60

Hz)

AC power cord

(included) Inner row

Outer row

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions

carefully.

These operating instructions fundamentally explain the operation of

RX-D15.

The model number and serial number of this product can be

found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for fu-

ture reference.

MODEL NUMBER _________________________________

SERIAL NUMBER _________________________________

The illustrations show RX-D15.

(RX-D12 is for U.S.A. only.)

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when ask-

ing for replacement parts.

(Only for U.S.A.)

To order accessories contact 1-800-332-5368 or

web site (http://www.panasonic.com).

AC power supply cord (polarized) (RJA0065-1D) .................. 1pc.

Note

The included AC power supply cord is for use with this unit only. Do

not use it with other equipment.

Remote control transmitter ......... 1pc. RX-D15 and RX-D13 only

RX-D15: (EUR648258), RX-D13:(EUR648257)

Portable Stereo

CD System

Operating Instructions

Model No.

RX-D15

RX-D13

RX-D12

p1new 3/24/05, 11:59 PM1

RQT5685

TUNER

H.E.S. XBS

Controls

Main unit:

(For RX-D15 and RX-D13 only)

Remote control signal sensor (SENSOR)

Tape play button ( PLAY)

Rewind/review button ( REW/REV)

Fast-forward/cue button ( FF/CUE)

Stop/eject button ( / STOP/EJECT)

Tune mode, CD play mode select button

(TUNE MODE, CD PLAY MODE)

Speaker

(For RX-D15)

Harmonic Enhancer Sound button (

H.E.S.

)

Press to give a clear vocal sound.

Press again to turn oﬀ.

(For RX-D13 and RX-D12)

XBS button

Press to boost the bass sound.

Press again to turn oﬀ.

Display

Pause button ( PAUSE)

CD lid open/close

( CD OPEN/CLOSE)

Record button ( )

Function select switch

( )

CD lid

Note

These speakers do not have magnetic shielding. Do not place

them near televisions, personal computers or other devices

easily inﬂuenced by magnetism.

Tape lid

Auto scan button (AUTO SCAN)

(For RX-D15 only)

Center speaker

Volume control

( )

CD play/pause, band

select button ( , BAND)

FM mode select/CD stop/

program clear button

( FM MODE/CLEAR)

Band select button

(BAND)

CD play mode

select button

(CD PLAY MODE)

FM mode select

button (FM MODE)

Preset channel select/

preset scan buttons

( PRESET TUNE )

Normal tuning/CD

skip, search buttons

( , )

CD play/pause button

( )

(The function is the

same as on the main

unit for RX-D13.)

(For RX-D15 only)

CD stop/program

clear button

( )

XBS button (

XBS

)

Press to boost the

bass sound.

Press again to turn

oﬀ.

Tuning/CD skip, search buttons

( , TUNE/CD)

Memory button (MEMORY)

Remote control:

(The remote control is available only for RX-D15 and RX-D13.)

The functions of the buttons without descriptions are the same as on

the main unit.

Battery installation

Insert the batteries (not included)

observing the correct polarities (e d, ).

Operation notes

• Do not place obstacles between the remote control signal sensor and

the remote control unit.

• Do not expose the remote control signal sensor to direct sunlight or to

the bright light of ﬂuorescent light.

• Take care to keep the remote control signal sensor and end of the remote

control unit free from dust.

To prevent damage

• Never place heavy items on it.

• Do not disassemble or reconstruct it.

• Do not spill water or other liquids into it.

Correct method of use

Concerning the remote control

Transmission

window

About 7 meters in front

of the signal sensor

Remote control

signal sensor

R6, AA, UM-3

(For RX-D15 and RX-D13 only)

p1-2 3/25/05, 4:08 AM2

RQT5685

1Switch [ ] to “TUNER”.

(Power comes on.)

2Press [BAND] to select “FM” or “AM”.

3(Omit this step if using the remote control)

If “ ” is on the display, press

[TUNE MODE] to clear it oﬀ .

4Press [–/ ] or [ /+] tog f

tune to the desired station.

The frequency changes one step

each time a button is pressed.

Automatic tuning

Keep [–/

g f] or [ /+] depressed and release when the frequency

display starts to change. A station with good reception is automati-

cally selected and the process stops.

To stop automatic tuning, press [–/

g f] or [ /+] again.

Note

Automatic tuning may stop on a frequency where there is no station if

there is interference. Press [–/

g f] and [ /+] to tune if this occurs.

5Adjust the volume.

To use auto scan

You can search for a station by listening to all tuned-in stations for 8

seconds each.

Preparation: Switch [ ] to “TUNER”.

1. Press [BAND] to select “FM” or “AM”.

2. Press [AUTO SCAN].

Auto scan starts.

3. Press [AUTO SCAN] when you ﬁnd the desired station.

Auto scan ends when it reaches the original frequency again.

To stop during the process, press [AUTO SCAN].

To improve reception

FM: Extend the whip antenna and adjust its direction.

AM: Adjust facing of the unit.

If noise is excessive in the FM stereo mode

Press [FM MODE]. (“ ” lights up.)

Sound will be produced in monaural, but this also reduces noise.

Press the button again to cancel. (“ ” goes out.)

To receive FM broadcasts allocated in 0.1

MHz

(Only from the main unit)

First press [BAND] to select “AM”. Now, press and hold [BAND]. The dis-

play changes in a few seconds to show the current lowest FM frequency.

Continue to hold down the button.

The minimum frequency changes and the step is changed at the same

time. Changing the step erases all preset stations.

Repeat the above to change the step back.

Preset the stations (twelve FM and twelve AM) to make tuning simpler.

1Tune to the desired station.

Do steps on the left.1 4–

2Press [MEMORY].

3While “ ” and the frequency are

flashing

Press [MEMORY].

4While “ ” and the preset channel

are flashing

Press [–/ ] or [ /+] tog f

select the desired channel.

(Remote control: [4444

4] or [3333

3])

5Press [MEMORY].

(This completes presetting.)

6Repeat steps 1–5 to preset other stations.

Note

If “ ” goes oﬀ during presetting, return to step 2.

Press [BAND] to select “FM” or “AM”.

(Omit this step if using the remote control)

Press [TUNE MODE] to display

“ ”.

Press [–/

g f] or [ /+] to select

the desired channel (1–12).

(Remote control: [44

4] or [33

3])

To use preset scan

You can search for a station by listening to all preset channels for 8

seconds each.

1. Do steps to above.

For remote control, replace [–/

g f] or [ /+] described below with [4444

or [3333

3].

2. Press and hold [–/

g f] or [ /+] until “PS” appears on the display.

3. Press [–/

g f] or [ /+] when you ﬁnd the desired channel.

Preset scan ends after searching through each preset channel once.

To stop during the process, press [–/

g f] or [ /+].

Normal tuning Preset tuning

Listening to radio broadcasts

To listen to preset channels

How to preset

Indicates

auto scan

Indicates

preset scan

“ ” lights when an FM stereo

broadcast is being received.

Preset channel

1 5 4

12 3

2 3 5 4

p3-4 3/25/05, 4:10 AM3

Produktspecifikationer

Varumärke:	Panasonic
Kategori:	Stereoapparater
Modell:	RX-D13
Färg på produkten:	Zwart
Vikt:	300 g
Bredd:	70 mm
Djup:	60 mm
Höjd:	170 mm
Användarmanual:	Ja
Husmaterial:	Aluminium
Internationell säkerhetskod (IP):	IP67
LED-indikatorer:	Ja
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Nee
Monteringsmetod:	Plafond
Maximal upplösning:	752 x 582 Pixels
Strömutgång (volt):	+12V
Minimal belysning:	0 Lux
Synfältsvinkel (FOV).:	45 °
Medföljande kablar:	BNC, RCA
Nattseende:	Ja
LED-typ:	IR
Infraröd våglängd:	850 nm
Analog signalformat:	NTSC, PAL
Optisk sensorstorlek:	1/3 "
Anslutning för nätadapter:	Ja
Bildsensortyp:	CCD
Optisk zoom:	- x
Kamerans slutartid:	1/100000 s
Gränssnitt:	BNC
Typ kamerasluter:	Elektronisch
Grafikupplösningar som stöds:	768 x 494
PTZ-kontroll:	Nee
Antal TV-linjer:	540
Dag/nattläge:	Ja
Monteringsfästen ingår:	Ja
Night vision scope:	25 m
Antal LED-belysning:	12
Drifttemperatur (TT):	-20 - 45 °C
Linsdiameter:	6 mm
NTSC-upplösningar:	768 x 494 Pixels
PAL-upplösningar:	752 x 582 Pixels
Infraröda lysdioder är levande:	10000 uur