Panduit S52SPS Bruksanvisning

Läs nedan 📖 manual på svenska för Panduit S52SPS (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 V00029CC Rev. 02
Page 1 of 2
N
ET
-A
CCESS
S-Type Server Cabinets
(Side Panels - S21SPSE, S51SPSE, S22SPSE, S52SPSE,
S81SPSE, S82SPSE, S11SPSE, S12SPSE)
Side Panel Support Bracket Installation
-Secure Side Panel Support Bracket to cabinet frame with [4] M5 Torx Screws
[4] M5 x 12mm Screws
(use T25 Torx bit)
[2] Nut Plates
Side Panel Support Bracket
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
www.panduit.com
INSTALLATION INSTRUCTIONS V00029CC Rev. 02
Page 2 of 2
Spring Loaded Hinge Pin
(Top and Bottom)
Move Finger Pull into
Slot to Lock Hinge Pin
in OPEN position
Spring Loaded Hinge Pins
Spring Loaded Hinge Pins
[2] Locations
Front Side Panel Rear Side Panel
Adjust Fit of Side Panels
Use included wrench to raise
or lower adjustment bushings
Side Panels removed
from view to add clarity
Adjustment
Bushing
Adjustment
Wrench
(included)
Side Panels (Removal/Installation and Adjustment - optional)
- Pull and release [4] Spring Loaded Hinge Pins to install Front Side Panel onto cabinet frame
- Pull and release [2] Spring Loaded Hinge Pins to install Rear Side Panel onto cabinet frame
- Close rear side panel and set both locks to LOCKED position
REVERSE STEPS to remove In-Row Side Panels

Produktspecifikationer

Varumärke: Panduit
Kategori: Inte kategoriserad
Modell: S52SPS

Behöver du hjälp?

Om du behöver hjälp med Panduit S52SPS ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Panduit Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer