PCE Instruments PCE-RVP 180 Bruksanvisning

PCE Instruments Mätutrustning PCE-RVP 180

Läs nedan 📖 manual på svenska för PCE Instruments PCE-RVP 180 (5 sidor) i kategorin Mätutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/5
User Manualting
Manual
Vacuum Pump PCE-RVP 180 / PCE-RVP 2200
Vacuum Pump PCE-RVP 180 / PCE-RVP 2200
Vacuum Pump PCE-RVP 180 / PCE-RVP 2200
Vacuum Pump PCE-RVP 180 / PCE-RVP 2200Vacuum Pump PCE-RVP 180 / PCE-RVP 2200
01 02
A
Structure and Technical Data
Structure
Oil Tank
Oil Filling Cap
Handle
Fan Cover
Motor
Base
Technical Data
Applications
PCE-RVP vacuum pumps are d used to create a vacuum by evacuating gas from a seale
vessel. The pumps are applicable for refrigeration maintenance to charge refrigerants of
CFC, HCFH and HFC such as R12/R22/R134a and air extraction in printing machines, food
processing, gas analysis, thermoplastic molding, etc.. In some cases they can be used as fore
pumps for high vacuum equipment.
Oil Sight Glass
BApplications and Features
Oil Drain Plug
Model
Rated power supply
Ultim ate Vac uum (M icron )
Motor Power (HP)
Intake Fittings
Dimensions (mm)
Oil Capacity (ml)
N.W.(kg)
Single Stage Rotary Vane Vacuum Pump
1/4" & 3/8" Flare
220V~50Hz/110V~60Hz
PCE-RVP 180
8/9.6
226/270
150
3/4
780
14
383×138×255
Flow Rate CFM
L/min
PCE-RVP 2200
12/14.4
340/407
15
1 1/2
620
15.7
383×138×255
220V~50Hz/110V~60Hz
Double Stage Rotary Vane Vacuum Pump
Model
Rated power supply
Ultim ate Vac uum (M icron )
Motor Power (HP)
Intake Fittings
Dimensions (mm)
Oil Capacity (ml)
N.W. (kg)
Flow Rate CFM
L/min
1/4" & 3/8" Flare
03 04
Features
1. High ultimate vacuum and high pumping speed
High ultimate vacuum and high pumping speed are achieved by taking integral cylinder
construction with high precision.
2. High efficient filtration
High quality filter element is used to reduce oil mist effectively.
3. Comfortable and robust handle
Soft rubber lined handle, comfortable to carry and use.
4. Elegant appearance
Unique and elegant appearance with square-shaped pump casing and fan cover.
CPreparation, Operation and Safety Precautions
Preparation
1. Make sure the power supply matches the voltage and frequency marked on the pump
nameplate.
2. Make sure the switch is in the OFF position before connecting electrical power to the pump.
3. Fill oil till the oil level reaches the middle position on oil sight glass. Low oil level will cause
pump performance loss while high oil level may result in oil spraying.
Operation
1. Before using the vacuum pump, remove the inlet cap and connect the pump to the sealed
vessel (Check and make sure the thread of the pipe fits that of the inlet port). The length of the
connecting pipe shall be as short as possible.
2. Check and make sure the air inlet is well sealed without any leakage.
3. Switch on the pump to start operation.
4. Close the valve between the pump and the sealed vessel when the operation is finished.
5. Switch off the pump and remove the power plug.
6. Remove the connecting pipe.
Safety Precautions
Always wear goggles when handling air-conditioning refrigerant.
Do not contact the refrigerant directly! Personal injury may occur.
Hot surface! Do not touch the oil tank or pump casing during pump operation.
Risk of electrical shock! Make sure all equipment are properly grounded when connecting
the power supply.
The pump is not allowed to operate more than 3 minutes while the inlet is exposed to the
atmosphere.
The ambient temperature for proper operation is 5°C - 40°C.
The voltage of the pump is 220V±10%/50Hz. The power socket must be grounded.
The pump body will be damaged to take out the refrigerant when the pump chamber is
pressurized. It is recommended to use special equipment to do this work.
WARNING!
To avoid personal injury, please carefully read and follow the instructions of this manual.

Produktspecifikationer

Varumärke: PCE Instruments
Kategori: Mätutrustning
Modell: PCE-RVP 180

Behöver du hjälp?

Om du behöver hjälp med PCE Instruments PCE-RVP 180 ställ en fråga nedan och andra användare kommer att svara dig


Mätutrustning PCE Instruments Manualer

PCE Instruments

PCE Instruments PCE-PMI 1 Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-324 Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-TC 32N Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Bruksanvisning

14 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3950S Bruksanvisning

9 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3750S Bruksanvisning

9 Januari 2025
PCE Instruments

PCE Instruments AQ-FM S900 Bruksanvisning

9 Januari 2025
PCE Instruments

PCE Instruments PCE-FST-200-201-H-I Bruksanvisning

9 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3900 Bruksanvisning

8 Januari 2025
PCE Instruments

PCE Instruments PCE-VT 3700S Bruksanvisning

8 Januari 2025

Mätutrustning Manualer

Nyaste Mätutrustning Manualer

Klein Tools

Klein Tools CL810 Bruksanvisning

14 Januari 2025
Klein Tools

Klein Tools CL710 Bruksanvisning

14 Januari 2025
Ebro

Ebro PHT 830 Bruksanvisning

13 Januari 2025
Gossen Metrawatt

Gossen Metrawatt PROFiTEST H+E EASY CHECK Bruksanvisning

10 Januari 2025
PCE

PCE -VE 1014N-F Bruksanvisning

9 Januari 2025
TFA

TFA 40.1058.11 Bruksanvisning

9 Januari 2025
TFA

TFA SANDY 40.1043.06 Bruksanvisning

9 Januari 2025
TFA

TFA 40.1046 Bruksanvisning

9 Januari 2025
Sauter

Sauter CJ P2 Bruksanvisning

8 Januari 2025
Sauter

Sauter 289-100 Bruksanvisning

8 Januari 2025