Philips Series 5000 XZ5810 Bruksanvisning

Philips Rakapparat Series 5000 XZ5810

Läs nedan 📖 manual på svenska för Philips Series 5000 XZ5810 (84 sidor) i kategorin Rakapparat. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/84

Series S5000

XZ5810, S5888,

S5580, S5571,

S5570, S5560,

S5551, S5530,

S5380, S5370

17 30

25 26 27

English 6

简体中文 41

General description

1 Protection cap for nose trimmer attachment

(S5530/37 only)

2 Click-on nose trimmer attachment (S5530/37

only)

3 Protection cap for cleansing brush attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43,

S5570/33, S5560/33 only)

4 Click-on cleansing brush attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43,

S5570/33, S5560/33 only)

5 Comb for beard styler attachment (S5580/68,

S5571/68, S5570/33, S5560/33 only)

6 Click-on beard styler attachment (S5580/68,

S5571/68, S5570/33, S5560/33 )

7 Click-on precision trimmer attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43,

S5380/04, S5370/04, S5530/37 only)

8 Protection cap for shaving unit (XZ5810/70,

S5888/75, S5380/04, S5370/04 only)

9 Click-on shaving unit

10 Shaving unit release button

11 On/off button

12 Turbo button

13 Handle

14 Socket for small plug

15 Battery charge indicator with 3 lights

16 Unplug for use symbol

17 Travel lock symbol

18 Replacement reminder

19 Cleaning reminder

20 Cleaning cartridge for SmartClean system

(XZ5810/70, S5888/75, S5570/33, S5560/33,

S5551/27, S5530/37 only)

21 SmartClean system (XZ5810/70, S5888/75,

S5570/33, S5560/33, S5551/27, S5530/37 only)

6English

22 Cap of SmartClean system (XZ5810/70,

S5888/75, S5570/33, S5560/33, S5551/27,

S5530/37 only)

23 On/off button

24 Replacement symbol

25 Rinsing symbol

26 Ready symbol

27 Battery symbol

28 Supply unit

29 Small plug

30 Pouch (XZ5810/70, S5570/43, S5570/33,

S5560/33, S5530/37 only)

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your product.

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

English

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

- Always unplug the shaver before you clean it

under the tap.

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as

this may cause injury. Always replace a

damaged part with one of the original type.

- This appliance contains batteries that are non-

replaceable.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 60°C to rinse the

shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

8English

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning fluid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning

cartridge, always make sure the cartridge

compartment is closed before you use the

cleaning system to clean or charge the shaver.

- When the cleaning system is ready for use, do

not move it to prevent leakage of cleaning fluid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the

shaver.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap. For safety reasons, the shaver can

therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

English

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Battery charge indicator

Note: If you press the on/off button during

charging, the 'unplug for use' symbol flashes white

to remind you that you have to disconnect the

appliance from the wall socket.

Quick charge: When the battery is empty and you

connect the appliance to the wall socket, the lights

of the battery charge indicator light up one after

the other repeatedly. When the appliance contains

enough energy for one shave, the bottom light of

the battery charge indicator starts flashing slowly.

While the appliance continues to charge, first the

bottom light of the battery charge indicator flashes

and then lights up continuously. Then the second

light flashes and then lights up continuously, and

so on until the appliance is fully charged.

Battery fully charged

Note: When the battery is full, the display switches

off automatically after 30 minutes.

Note: This appliance can only be used without

cord.

When the battery is fully charged, all lights of the

battery charge indicator light up white

continuously.

10 English

Battery low

When the battery is almost empty, the bottom light

of the battery charge indicator flashes orange. At

this point there is enough energy left for one

shave.

Remaining battery charge

The remaining battery charge is shown by the

lights of the battery charge indicator that light up

continuously.

’Unplug for use’ reminder

The ‘unplug for use’ symbol flashes to remind you

that you have to disconnect the appliance from

the wall socket before you can switch it on.

Cleaning reminder

Clean the shaver after every use for optimal

performance. When you switch off the appliance,

the cleaning reminder flashes to remind you to

clean the appliance.

Travel lock

When you are going to travel, you can lock the

shaver to prevent it from accidentally switching on

(see 'Activating the travel lock').

Activating the travel lock

English

3 sec.

1 Press the on/off button for 3 seconds to use

the travel lock mode.

While you activate the travel lock, the travel lock

symbol lights up continuously. When the travel

lock is activated, the travel lock symbol flashes.

If you try to switch on the shaver while the

travel lock is active, the travel lock symbol

flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

While you deactivate the travel lock, the travel

lock symbol lights up briefly and the shaver

produces a short sound. The shaver switches on

and is now ready for use again.

Replacement reminder

For maximum shaving performance, we advise you

to replace the shaving heads every two years. The

appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The shaving unit symbol and

arrows light up to indicate that you have to replace

the shaving heads (see 'Replacing the shaving

heads').

Note: After replacing the shaving heads, you can

reset the replacement reminder by pressing the

on/off button for 7 seconds. If you do not reset the

replacement reminder, the shaver resets

automatically after 9 shaves.

12 English

Turbo setting (specific types only)

The appliance is equipped with a Turbo or Turbo+

setting. This setting is intended for quicker and

more intense shaving and makes hard-to-reach

areas easier to shave.

Activating the Turbo setting

1 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

Deactivating the Turbo setting

1 To deactivate the Turbo setting, press the Turbo

button once.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty.

Charging takes approx. 1 hour.

Note:You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched off.

2 Put the small plug in the appliance and put the

supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Note: When the battery is full, the display

switches off automatically after 30 minutes.

English

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once.

2 To switch off the appliance, press the on/off

button once.

The display lights up for a few seconds to show the

remaining battery status.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

exclusively with this appliance for a period of 3

weeks.

Dry shaving

1 Switch on the appliance.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, as this can cause

skin irritation.

3 Clean the appliance after use.

Wet shaving

For a more comfortable shave, you can also use

this appliance on a wet face with shaving foam or

shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

English

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Clean the appliance after use.

Note: Make sure you rinse all foam or shaving

gel off the appliance.

16 English

Turbo setting (specific types only)

The appliance is equipped with a Turbo or Turbo+

setting. This allows you to shave hard-to-reach

areas more quickly.

1 Switch on the appliance.

2 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

3 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Circular movements provide better

shaving results than straight movements.

4 To deactivate the Turbo setting, press the Turbo

button once.

Using the click-on attachments

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your product.

Removing or attaching click-on attachments

1 Make sure the appliance is switched off.

2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

English

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the precision trimmer attachment

You can use the precision trimmer attachment to

touch up your beard, sideburns and moustache.

1 Attach the attachment to the appliance ('click').

2 Switch on the appliance.

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards

while you exert gentle pressure.

4 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the beard styler attachment with

comb

You can use the beard styler attachment with the

comb attached to style your beard at one fixed

setting or at different length settings. You can also

use it to pre-trim any long hairs before shaving for

a more comfortable shave.

The length settings on the beard styler attachment

correspond to the remaining hair length after

cutting and range from 1 to 5 mm (3/64 - 3/16 in). 

1 Attach the attachment to the appliance ('click').

18 English

2 Slide the comb straight into the guiding grooves

on both sides of the beard styler attachment

(‘click’).

3 Press the length selector and then push it to

the left or right to select the desired hair length

setting.

4 Switch on the appliance.

5 Move the appliance upwards while you exert

gentle pressure. Make sure the front of the

comb is in full contact with the skin.

6 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the beard styler attachment without

comb

You can use the beard styler attachment without

the comb to contour your beard, moustache,

sideburns or neckline at a length of 0.5 mm

(1/32 in). 

1 Pull the comb off the beard styler attachment.

Note: Grab the comb in the center to pull it off

the beard styler attachment. Do not pull at the

sides of the comb.

2 Switch on the appliance.

English

3Hold the beard styler attachment perpendicular

to the skin and move the appliance downwards

while you exert gentle pressure.

4Clean the attachment after use (see 'Cleaning

and maintenance').

Using the cleansing brush attachment

Note: For better shaving results, use the click-on

cleansing brush attachment before shaving.

Use the rotating cleansing brush with your daily

cleansing cream. The cleansing brush removes oil

and dirt, contributing to a healthy and oil-free skin.

We advise you to use it no more than twice a day.

Do not use the appliance on damaged or irritated

skin or on wounds.

1Place the attachment on the attachment

holder.

2Attach the attachment to the appliance ('click').

3Moisten the attachment with water.

Note: Do not use the appliance with a dry

cleansing brush attachment, as this can irritate

the skin.

4Moisten your face with water and apply a

cleanser to your face.

5Place the attachment on your cheek.

6Switch on the appliance.

20 English

20 sec.

7Gently move the brush across your skin from

the nose towards the ear. Do not push the

brush too hard onto the skin to make sure that

the treatment remains comfortable.

Note: Do not cleanse the sensitive area around

your eyes.

20 sec.

8After approx. 20 seconds, move the appliance

to your other cheek and start cleansing this part

of your face.

20 sec.

9After approx. 20 seconds, move the appliance

to your forehead and start cleansing this part of

your face. Gently move the brush head from left

to right.

Note: We advise you to not overdo the

cleansing and to not cleanse any zone longer

than 20 seconds.

10 Switch off the appliance and clean the

attachment after use.

11 After the treatment, rinse and dry your

face.Your face is now ready for the next step of

your daily skincare routine.

Using the nose/ear trimmer attachment

You can use the nose/ear trimmer attachment to

trim your nose and/or ear hair.

Trimming nose hair

When trimming nose hair, make sure your nostrils

are clean.

English

1Attach the attachment to the appliance ('click').

2Switch on the appliance.

3Carefully insert the attachment into one of your

nostrils.

Do not insert the attachment more than 0.5 cm

into your nostrils.

4Slowly move the attachment around to remove

all unwanted hairs in your nostrils.

5Clean the attachment after use (see 'Cleaning

and maintenance').

Trimming ear hair

When trimming ear hair, make sure your outer ear

channels are clean and free from wax.

1Attach the attachment to the appliance ('click').

2Switch on the appliance.

3Slowly move the attachment along the rim of

the ear to remove hairs that stick out beyond

the rim.

4Insert the attachment into the outer ear

channel.

Do not insert the attachment more than 0.5 cm

into your ear channel, as this could damage the

eardrum.

5Slowly turn the attachment around to remove

all unwanted hairs from your outer ear channel.

6Clean the attachment after use (see 'Cleaning

and maintenance').

Cleaning and maintenance

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your product.

22 English

Cleaning the shaver in the SmartClean system

Preparing the SmartClean system for use

Caution: Do not tilt the SmartClean system to

prevent leakage.

Note: Hold the SmartClean system while you

prepare it for use.

Note: If you clean the shaver in the SmartClean

system once a week, the SmartClean cartridge

lasts approximately three months.

1Put the small plug in the back of the

SmartClean system.

2Put the supply unit in the wall socket.

3While holding the SmartClean system with one

hand, press the button on the side of the

SmartClean system and lift the top part of the

SmartClean system.

4Pull the seal off the cleaning cartridge.

5Place the cleaning cartridge in the SmartClean

system.

English

6While holding the SmartClean system with one

hand, gently push the top part of the

SmartClean system back down (‘click’).

Using SmartClean

Note: If you use the shaver with shaving foam,

shaving gel or pre-shave products, briefly rinse the

shaver warm water before you clean it in

SmartClean.

Caution: Always shake excess water off the

shaver before you place it in the SmartClean

system.

1Press to open the SmartClean cap, to be able to

place the shaver in the holder ('click').

2Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean holder.

3Place the shaver in the holder (1), tilt the shaver

backwards (2) and press down the top cap to

connect the shaver ('click') (3).

The battery symbol on SmartClean starts to

flash, which indicates that the shaver is

charging.

24 English

4Press the on/off button on SmartClean to start

the cleaning program.

During the cleaning phase, the cleaning symbol

flashes. When the cleaning phase is done (after

approx. 10 minutes), the cleaning symbol lights

up continuously.

Next, the ready symbol lights up continuously.

30 minutes after the cleaning program and

charging are done, SmartClean switches off

automatically.

The battery symbol lights up continuously to

indicate that the shaver is fully charged.

Charging takes approx. 1 hour.

5To let the shaver dry, you can leave it in the

SmartClean system until your next shave. You

can also remove the shaver from the

SmartClean system, shake off excess fluid, open

the shaving unit and let the shaver air-dry.

Press to open the SmartClean cap, to remove

the shaver from the holder ('click').

Note: If you press the on/off button of SmartClean

during the cleaning program, the program stops. In

this case, the cleaning or drying symbol goes out.

Note: If you disconnect SmartClean from its power

supply, the cleaning program stops.

Replacing the SmartClean cartridge

Replace the cleaning cartridge when the

replacement symbol flashes orange or when you

are no longer satisfied with the cleaning result. If

you clean the shaver with SmartClean once a

week, the cartridge lasts approximately three

months.

English

While rinsing the shaving unit, water may drip out

of the base of the shaver. This is a normal

occurrence.

1Switch on the appliance.

2Rinse the shaving unit under a warm tap.

3Switch off the appliance. Press the release

button to open the shaving unit.

4Rinse the hair chamber under the tap.

5Rinse the shaving head holder under a warm

tap.

6Carefully shake off excess water and let the

shaving head holder air-dry completely.

7Close the shaving head holder ('click').

English

Cleaning the click-on attachments

Never dry trimmer or beard styler attachments with

a towel or tissue, as this may damage the trimming

teeth.

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your product.

Cleaning the precision trimmer attachment

Clean the trimmer attachment after each use.

1 Switch on the appliance with the precision

trimmer attachment attached.

2Rinse the attachment under a warm tap.

3After cleaning, switch off the appliance.

4Carefully shake off excess water and let the

attachment air-dry completely.

For optimal performance, lubricate the teeth of the

attachment with a drop of sewing machine oil

every six months.

Cleaning the beard styler attachment

Clean the beard styler attachment after each use.

1 Pull the comb off the beard styler attachment.

Note: Grab the comb in the center to pull it off

the beard styler attachment. Do not pull at the

sides of the comb.

2Rinse the cut hairs off the cutting unit with

lukewarm water.

3Rinse the cut hairs off the comb.

28 English

4Remove the cutting unit from the beard styler

attachment. By pushing the cutting unit from

the beard styler attachment you can remove

any hairs that have accumulated inside the

beard styler. You can also rinse the back of the

cutting unit.

5Rinse cut hairs out of the beard styler

attachment.

6Carefully shake off excess water and leave the

comb, cutting unit and beard styler attachment

to dry before next usage.

7When the cutting unit is dry attach it to the

beard styler attachment.

8When the comb is dry, re-attach it to the beard

styler.

9For optimal performance, lubricate the teeth of

the attachment with a drop of sewing machine

oil regularly.

Cleaning the cleansing brush attachment

Clean the cleansing brush attachment after each

use.

1 Switch off the appliance.

2Detach the brush head from the attachment

holder.

3Clean the parts thoroughly with warm water

and soap.

4Dry the cleansing brush attachment with a

towel.

English

Cleaning the nose trimmer attachment

Clean the nose trimmer attachment every time you

have used it.

1 Make sure the appliance is switched off.

2Rinse the cutting element with hot water.

3Switch on the appliance and rinse the cutting

element once more to remove any remaining

hairs. Then switch off the appliance again.

4Carefully shake off excess water and let the

nose trimmer attachment dry.

Tip: For optimal trimmer performance, lubricate

the trimmer teeth with a drop of sewing machine

oil every six months.

Storage

We advise you to let the appliance and its

attachments dry before you put the protection

caps on the attachments or store the shaver in the

pouch.

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your product.

Store the shaver in the pouch (if supplied).

Put the protection cap on the shaver to protect it

from any dirt accumulation.

30 English

Place the protection cap on the nose trimmer

attachment.

Put the protection cap on the cleansing brush

attachment to protect it from dirt accumulation.

Replacement

Replacing the shaving heads

2yrs

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

Replace damaged shaving heads immediately.

Always replace the shaving heads with original

Philips shaving heads (see 'Ordering accessories').

Replacement reminder

The replacement reminder indicates that the

shaving heads need to be replaced.The shaving

unit symbol and arrows light up when you switch

off the appliance.

1 Switch off the appliance.

2Press the release button to open the shaving

unit.

English

3Pull the shaving head holder off the bottom

part of the shaving unit.

4Turn the retaining rings counterclockwise and

remove them. Place them aside in a safe place.

5Remove the shaving heads from the shaving

head holder.

Discard the used shaving heads immediately to

avoid mixing them with the new shaving heads.

6Place the new shaving heads in the shaving

head holder.

Note: Make sure that the projections of the

shaving heads fit exactly into the recesses of

the shaving head holder.

32 English

7Place the retaining rings back onto the shaving

heads and turn them clockwise to reattach the

retaining ring.

Each retaining ring has two recesses and two

projections that fit exactly in the projections

and recesses of the shaving head holder.

- Turn the ring clockwise until your hear a click to

indicate that the ring is fixed.

Note: Hold the shaving head holder in your

hand when you reinsert the shaving heads and

reattach the retaining rings. Do not place the

shaving head holder on a surface, as this may

cause damage to the shaving heads.

8Reinsert the hinge of the shaving head holder

into the slot of the shaving unit. Close the

shaving head holder (‘click’).

7 sec.

9To reset the replacement reminder, press and

hold the on/off button for approx. 7 seconds.

English

Replacing the cleansing brush attachment

The cleansing brush attachment should be

replaced every 3 months or earlier if the brush

hairs are bent or damaged (see 'Ordering

accessories').

Ordering accessories

To buy accessories or spare parts, visit

www.philips.com/parts-and-accessories or go to

your Philips dealer. You can also contact the

Philips Consumer Care Center in your country (see

the international warranty leaflet for contact

details).

The following accessories and spare parts are

available:

- SH50 Philips shaving heads

- HQ110 Philips shaving head cleaning spray

- RQ111 Philips beard styler attachment

- RQ585 Philips cleansing brush attachment

- RQ560, RQ563 Philips cleansing brush heads

- JC301, JC302, JC303, JC304, JC305 cleaning

cartridge

- HQ8505 supply unit

Note: The availability of the accessories may differ

by country.

Recycling

- Do not throw away the product with the normal

household waste at the end of its life, but hand

it in at an official collection point for recycling.

By doing this, you help to preserve the

environment.

34 English

4Bend the snap hooks aside and remove the

transparent cover of the power unit.

5Lift out out the battery holder and cut the wires

with a pair of cutting pliers or scissors.

6Bend the battery tags aside with a pair of

cutting pliers or a screw driver.

7Remove the rechargeable batteries.

Warranty and support

If you need information or support, please visit

www.philips.com/support or read the

international warranty leaflet.

Warranty restrictions

The shaving heads (cutters and guards) are not

covered by the terms of the international warranty

because they are subject to wear.

Troubleshooting

This chapter summarizes the most common

problems you could encounter with the appliance.

If you are unable to solve the problem with the

information below, visit www.philips.com/support

for a list of frequently asked questions or contact

the Consumer Care Center in your country.

36 English

Problem Possible cause Solution

Water is leaking

from the bottom

of the appliance.

During cleaning,

water may collect

between the inner

body and the outer

shell of the

appliance.

This is normal and not

dangerous because all

electronics are enclosed in

a sealed power unit inside

the appliance.

SmartClean

Problem Possible cause Solution

The SmartClean

does not work

when I press the

on/off button.

The SmartClean is

not connected to

the wall socket.

Put the small plug in the

SmartClean and put the

supply unit in the wall

socket.

The cleaning

cartridge is empty.

The replacement

symbol flashes to

indicate that you

have to replace the

cleaning cartridge.

Place a new cleaning

cartridge in the SmartClean.

The shaver is not

entirely clean

after I clean it

withthe

SmartClean.

You have not

placed the shaver in

SmartClean

properly, so there is

no electrical

connection

between

SmartClean and the

shaver.

Press down the top cap

(‘click’) to ensure a proper

connection between the

shaver and the SmartClean.

38 English

Problem Possible cause Solution

The battery of the

shaver is not

charged sufficiently.

If the battery of the shaver

is not charged sufficiently,

the SmartClean may not

work properly. The shaver

needs to be able to switch

on briefly during the rinsing

phase. Charge the shaver

for a short time before you

use the SmartClean to

clean your shaver.

The cleaning

cartridge needs to

be replaced.

Replace the cleaning

cartridge.

You have used

another cleaning

fluid than the

original Philips

Norelco cleaning

cartridge.

Only use the original

Philips Norelco cleaning

cartridge.

The hole of the

drain of the

cleaning cartridge is

blocked.

Remove the cartridge from

the SmartClean and push

the hairs down the drain

with a toothpick.

The shaver is not

fully charged

after I charge it

in SmartClean.

You have not

placed the shaver in

SmartClean

properly, so there is

no electrical

connection

between

SmartClean and the

shaver.

Press down the top cap

(‘click’) to ensure a proper

connection between the

shaver and SmartClean.

Problem Possible cause Solution

The nose trimmer

attachment pulls

at the hairs.

You move the

appliance too fast.

Slowly move the

attachment around to

remove all unwanted hairs

in your nostrils.

English

Problem Possible cause Solution

The nose trimmer

attachment does

not work.

The cutting

element of the

attachment is very

dirty, for instance

because some

nasal mucus has

dried inside the

cutting element.

Clean the cutting element

by rinsing it under the tap

with hot water. Switch on

the appliance and rinse the

cutting element once more

to remove any remaining

hairs

If rinsing the nose trimmer

under the tap does not

unblock the cutting

element, then immerse it in

a glass with warm water for

a few minutes. Then switch

on the appliance and rinse

it under the tap.

40 English

基本说明

1 鼻毛修剪器附件保护盖（仅限

S5530/37）

2 卡入式鼻毛修剪器附件（仅限

S5530/37）

3 洁面刷附件保护盖（仅限 XZ5810/70、

S5580/68、S5571/68、S5570/43、

S5570/33、S5560/33）

4 卡入式洁面刷附件（仅限 XZ5810/70、

S5580/68、S5571/68、S5570/43、

S5570/33、S5560/33）

5 适用于胡须造型器附件的修剪梳（仅限

S5580/68、S5571/68、S5570/33、

S5560/33）

6 卡入式胡须造型器附件（S5580/68、

S5571/68、S5570/33、S5560/33）

7 卡入式精确修剪器附件（仅限

XZ5810/70、S5580/68、S5571/68、

S5570/43、S5380/04、S5370/04、

S5530/37）

8 剃须刀头部件保护盖（仅限

XZ5810/70、S5888/75、S5380/04、

S5370/04）

9 卡入式剃须刀头部件

10剃须刀头部件释放按钮

11开/关按钮

12Turbo 按钮

13手柄

14小插头插座

简体中文

简介

感谢您的惠顾，很高兴您选择飞利浦！为

了让您能充分享受飞利浦提供的支持，请

在上注册您的www.philips.com/welcome

产品。

重要安全信息

使用本产品及其附件之前，请仔细阅读本

重要信息，并妥善保管以供日后参考。随

附的附件可能因产品而异。

危险

- 保持电源部件干燥。

- 警告符号注释：禁止在打开的水龙头下

进行清洗。

警告

- 要给电池充电，请仅使用产品随附的可

拆卸电源部件 (HQ8505)。

- 电源部件中包含一个变压器。请勿自行

更换电源部件的插头，否则将导致严重

后果。

简体中文

- 本产品也可以由 8 岁或以上年龄的儿童

以及肢体不健全、感觉或精神上有障碍

或缺乏相关经验和知识的人士使用，但

前提是有人对他们使用本产品进行监督

或指导，以确保他们安全使用，并且让

他们明白相关的危害。切勿让儿童玩弄

本产品。不要让儿童在无人监督的情况

下对本产品进行清洁和保养。

- 将剃须刀手持部分与电源软线分开后，

才能在水龙头下清洗手持部分。

- 使用前，请务必检查产品。请勿使用损

坏的产品，否则可能对人体造成伤害。

请务必用原装型号更换损坏的部件。

- 本产品包含的电池不可更换。

- 切勿拆开本产品更换充电电池。

注意

- 切勿将清洁系统或充电座浸入水中，也

不要在水龙头下冲洗。

- 警告符号注释：禁止用在打开的水龙头

下进行清洗。

- 切勿使用温度高于 60°C 的热水冲洗

剃须刀。

- 只能将本产品用于用户手册中所示的原

定用途。

- 出于卫生的目的，本产品只能供一个人

使用。

44 简体中文

- 切勿使用压缩气体、钢丝绒、研磨性清

洁剂或腐蚀性液体（例如汽油或丙酮）

来清洁产品。

- 如果剃须刀随附清洁系统，应始终使用

原装飞利浦清洁液（滤芯或瓶，取决于

清洁系统类型）。

- 清洁系统必须放在稳定、平坦的水平表

面上，以防漏液。

- 如果清洁系统采用清洁滤芯，在使用清

洁系统进行清洁或为剃须刀充电之前，

应始终确保滤芯仓已关闭。

- 清洁系统准备就绪时，切勿移动，以免

清洁液漏出。

- 冲洗剃须刀时，水可能从产品底部的插

口漏出。这是正常的，而且没有危险，

因为所有电子元件都封闭在剃须刀内部

的密封电源部件中。

- 请勿在包含电动空气清新器的墙壁插座

上或其周围使用电源部件，以免电源部

件受到不可修复的损坏。

电磁场 (EMF)

本 Philips 产品符合所有有关暴露于电磁

场的适用标准和法规。

概述

- 符号注释：适合于在洗澡或淋浴时使用

。允许在盛水的浴缸、淋浴、洗脸盆或

其他器皿附近使用本器具。

简体中文

- 该剃须刀具有防水性能。适合在沐浴或

淋浴时使用，也可以放在水龙头下清

洗。出于安全原因，该剃须刀在使用时

不能连接电线。

- 电源部件适合在 100 - 240 伏的电源电

压下工作。

- 该电源部件可将 100-240 伏的电压转换

为 24 伏以下的安全低电压。

显示屏

充电

注意：充电期间按开/关按钮，“拔出插

头即可使用”符号会呈白色闪烁，提醒您

需断开产品与电源插座的连接。

快速充电：电池电量耗尽后，当您将产品

连接到电源插座时，电池充电指示灯将逐

个亮起并重复循环。产品包含的电量足够

完成一次剃须时，底部的电池充电指示灯

开始缓慢闪烁。

产品如果继续充电，底部的电池充电指示

灯先是闪烁，然后持续亮起。然后，第二

个指示灯闪烁，之后持续亮起，以此类

推，直至本产品充满电。

电池已完全充满

注意：电池充满电后，显示屏会在 30 分

钟后自动关闭。

46 简体中文

注意：本产品只能在不接电源的情况下使

用。

电池充满电后，所有电池充电指示灯都将

呈白色持续亮起。

电池电量不足

当电池电量几乎耗尽时，电池充电指示灯

的底灯会呈橙色闪烁。

电池剩余电量

剩余的电池电量由持续亮起的充电指示灯

来表示。

“拔出插头即可使用”提示

“拔出插头即可使用”符号闪烁，提醒您

应先断开产品与电源插座的连接后才能打

开本产品。

简体中文

清洗提示

每次使用后请清洁剃须刀，以获得出色性

能。关闭产品时，清洗提示符号闪烁，提

醒您需要清洁产品。

旅行锁

您可以在携带本产品旅行之前将其锁住。

旅行锁可防止本产品被意外启动。

启用旅行锁

3 sec.

1 按住开/关按钮 3 秒钟以进入旅行锁模

式。

启用旅行锁后，旅行锁符号会持续亮

起。旅行锁启用后，旅行锁符号将闪

烁。

如果在旅行锁处于激活状态下尝试打开

剃须刀，旅行锁符号将闪烁。

解除旅行锁

1 按开/关按钮 3 秒钟。

48 简体中文

禁用旅行锁后，旅行锁符号会短暂亮起

且剃须刀会发出短促声音。剃须刀打开

后即可供再次使用。

更换提示

为获得更好剃须效果，建议每两年更换一

次剃须刀头。本产品配有更换提示，它会

提醒您更换剃须刀头。剃须刀头部件符号

和箭头亮起，表示需要更换剃须刀头 (请

参见 '更换剃须刀头')。

注意：更换剃须刀头后，您需要通过按

开/关按钮 7 秒来重置更换提醒。

高速设置（仅限于特定型号）

本产品配备了 Turbo 或 Turbo+ 设置。该

设置用于更快速、更强力地剃须，可以轻

松剃除难以到达部位的须发。

启用 Turbo 设置

1 要启用 Turbo 设置，请在启动产品后按

一下 Turbo 按钮。

禁用 Turbo 设置

1 要禁用 Turbo 设置，请按一下 Turbo

按钮。

充电

首次使用剃须刀之前，或当显示屏指示电

池电量几乎耗尽时，请先为剃须刀充电。

简体中文

充电约需 1 小时。

注意：不能在充电时使用本产品。

使用电源部件充电

1 确保产品电源已关闭。

2 将小插头插入本产品，然后将电源部件

插入电源插座。

3 充电之后，从电源插座上拔下电源部

件，并从本产品上拔下小插头。

注意：电池充满电后，显示屏会在 30

分钟后自动关闭。

在高效智能清洁系统中充电（仅限于特定型号）

1 将小插头插入高效智能清洁系统的背

面。

2 将电源部件插入电源插座。

3 按下可打开高效智能清洁系统的盖子，

以便将剃须刀放入支架（可听到“咔

哒”一声）。

4 将剃须刀倒置放在支架上方。确保剃须

刀的正面朝向高效智能清洁系统的支架

。

50 简体中文

5 将剃须刀放入支架并向后倾斜，然后按

下高效智能清洁系统的盖子以连接剃须

刀（可听到“咔哒”一声）。

电池符号闪烁表示产品正在充电。当电

池已完全充满电时，电池符号将持续亮

起。

使用本产品

注意：本产品只能在不接电源的情况下使

用。

打开或关闭产品

1 要打开本产品，请按一下开/关按钮。

2 要关闭产品，请按一下开/关按钮。

显示屏将亮起几秒钟时间，以显示电池剩

余电量状态。

剃须

皮肤适应期

前几次剃须可能不会带给您预期效果，并

且您的皮肤可能会受到轻度刺激。这是正

常的。您的皮肤和胡须需要时间适应任何

新的剃须系统。为了让您的皮肤适应这款

新产品，我们建议您在 3 周时间内定期

（至少每周 3 次）仅使用本产品剃须。

干剃

1 启动产品。

简体中文

2 让剃须刀头在您的皮肤上作迂回运动，

以刮剃向不同方向生长的所有须发。轻

轻按压，以获取舒适贴面的剃须感受。

注意：不要用力按压剃须刀，这样做可

能会导致皮肤疼痛。

3 使用后要清洁本产品。

湿剃

要获得更舒适的剃须体验，您也可以先用

剃须泡沫或剃须喱将脸弄湿，然后再用啫

本产品进行剃须。

要用剃须泡沫或剃须喱剃须，请按照下啫

面的步骤执行操作：

1 用水润湿皮肤。

2 在皮肤上涂抹剃须泡沫或剃须喱。啫

3 在水龙头下冲洗一下剃须刀头部件，确

保剃须刀头部件可以在您的皮肤上顺畅

滑动。

4 启动产品。

52 简体中文

5 让剃须刀头在您的皮肤上作迂回运动，

以刮剃向不同方向生长的所有须发。轻

轻按压，以获取舒适贴面的剃须感受。

注意：不要用力按压剃须刀，这样做可

能会导致皮肤疼痛。

注意：定期冲洗剃须刀头部件，确保其

能够继续在您的皮肤上顺畅滑动。

6 擦干面部。

7 使用后要清洁本产品。

注意：确保冲洗干净本产品上的所有泡

沫或剃须喱。啫

高速设置（仅限于特定型号）

本产品配备了 Turbo 或 Turbo+ 设置。使

用该功能，您可以快速剃除难以到达部位

的须发。

1 启动产品。

2 要启用 Turbo 设置，请在启动产品后按

一下 Turbo 按钮。

3 让剃须刀头在您的皮肤上作迂回运动，

以刮剃向不同方向生长的所有须发。轻

轻按压，以获取舒适贴面的剃须感受。

注意：划圈动作比直线动作的剃须效果

更好。

简体中文

4 要禁用 Turbo 设置，请按一下 Turbo

按钮。

使用卡入式附件

注意：随附的附件可能因产品而异。包

装盒上会显示随附于您产品的附件。

拆卸或安装卡入式附件

1 确保产品电源已关闭。

2 将附件竖直抽离产品。

注意：将附件从产品上抽出时，不要旋

转。

3 将附件的凸缘插入本产品顶部的槽内。

然后，按下附件将其安装到本产品上

（可听到“咔哒”一声）。

使用精确修剪器附件

您可使用修剪器附件修剪鬓角和须髭。

1 将附件安装到产品上（可听到“咔

哒”一声）。

2 启动产品。

3 将修剪器附件垂直放在皮肤上，向下移

动产品，同时轻轻按压。

4 使用 (请参见 '清洁和保养')后要清洁附

件。

54 简体中文

Produktspecifikationer

Varumärke:	Philips
Kategori:	Rakapparat
Modell:	Series 5000 XZ5810
Enhetsplacering:	Vrijstaand
Färg på produkten:	Zilver
Dörrgångjärn:	Rechts
Inbyggd display:	Nee
Vikt:	52000 g
Bredd:	545 mm
Djup:	550 mm
Höjd:	1760 mm
Nettoskatt:	100 W
Plugg typ:	Type G
Ismaskin:	Nee
Sladdlängd:	1.8 m
Ljudnivå:	39 dB
Energie-efficiëntieklasse:	E
Årlig-energiförbrukning:	218 kWu
Förpackningens vikt:	57000 g
Förpackningens bredd:	580 mm
Djuppackning:	590 mm
Förpackningshöjd:	1820 mm
Frys nettokapacitet:	101 l
Fryskapacitet:	4.5 kg/24u
Dörröppningsriktning utbytbar:	Ja
Kylskåpets nettokapacitet:	151 l
No Frost (kylskåp):	Nee
Kylskåp invändig belysning:	Ja
Typ av lampa:	LED
Multi-luftvägssystem (kylskåp):	Nee
Antal hyllor i kylskåp:	3
Antal-grönsakslådor:	1
Frysläge:	Onder
No Frost (frys):	Nee
Retentionstid vid strömavbrott:	11 uur
Snabbfrysfunktion:	Ja
Antal fryshyllor:	4
antal stjärnor:	4*
Total nettokapacitet:	252 l
Automatisk avfrostning (kylskåp):	Ja
Hyllmaterial:	Glas
Supercool funktion:	Ja
Kylskåpsdörrfickor:	2
Till fackområdet:	Nee
Nuvarande:	0.8 A
Kylmedium:	R600a
Antal kompressorer:	1
Lägsta drifttemperatur:	16 °C
Maximal temperatur (drift):	38 °C
Klimaatklasse:	N-ST
Automatisk avfrostning (frys):	Nee
Bulleremissionsklass:	C
Inverterteknik:	Nee
Justerbara fötter:	Ja
Kylsystem:	Statisch
Lågfrost fryssystem:	Ja
Justerbar termostat:	Ja
Justerbara hyllor:	Ja
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 Hz
Energieffektivitetsskala:	A tot G
Iskubshållare:	Ja