Piazzetta P963 C Bruksanvisning

Läs nedan 📖 manual på svenska för Piazzetta P963 C (72 sidor) i kategorin Värmare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/72
The instruction manual is an integral part of the product.
Pellet Stove
P963 - P963 C - P963 D - P963 M
INSTRUCTIONS FOR INSTALLATION,
USE AND MAINTENANCE
Please read this entire manual before installation and use of this
pellet fuel-burning room heater. Failure to follow these instructions
could result in property damage, bodily injury or even death.
Save these Instructions.
Contact local building or re ofcials about restrictions and
installation inspection requirements in your area.
English
Dear Customer,
Thank you for having chosen one of our products, which is the result of years of experience and continuous research aimed at making a superior
product in terms of safety, reliability and performance.
This booklet contains information and advice for safe and efcient use of your product.
IMPORTANT INFORMATION
The following symbols are used in some parts of the booklet:
a CAUTION: for actions that require particular caution and
suitable preparation.
d FORBIDDEN: for actions that UNDER NO CIRCUMSTANCES
must be carried out.
a Contact local building authority (such as municipal building
department, re department, re prevention, bureau. etc.)
before installation to determine if a permit and/or inspection
is required.
This instruction booklet has been prepared by the manufacturer and is
an integral part of the product. In the event of sale or relocation of the
product make sure this booklet accompanies it, since the information
contained in it is intended for the purchaser and for anyone involved
in the installation, use and maintenance of the product.
Read the instructions and the technical information contained in
this booklet carefully before proceeding with installation, use or any
repairs.
The observance of the instructions and technical information in this
instruction booklet guarantees the safety of persons and property; it
also ensures more efcient operation and an increased lifespan.
Gruppo Piazzetta S.p.A. cannot be held responsible for damage or
injury due to failure to comply with the instructions for installation,
use and maintenance given in this booklet, or due to unauthorised
alterations or to the use of other than original spare parts.
Appliance installation and use must conform with the manufacturer’s
instructions as well as with European and national legislation and
local regulations.
Installation, electrical connection, checks, maintenance and repairs
are operations which must be carried out exclusively by qualied and
authorised personal with specialised knowledge of the product.
The wall against which the product is to be placed must not be of
wood or any other ammable material. For correct installation it is
also important to comply with the section entitled MINIMUM SAFETY
DISTANCES”.
Before installing the product read all instruction booklets relevant to
the cladding, the ventilation kit and any other accessory.
Check that the oor where the product is to be installed is perfectly
level.
When handling the steel parts of the cladding it is advisable to use
clean cotton gloves to avoid leaving ngerprints that are difcult to
remove at rst time of cleaning.
The stove must be assembled by at least two persons.
See the guarantee certicate enclosed with the product for the terms, limitations and exclusions.
In line with its policy of constant product improvement and renewal, the manufacturer may make changes without notice.
This document is the property of Gruppo Piazzetta S.p.A.; no part of it may be disclosed to third parties without the written permission of
Gruppo Piazzetta S.p.A. All rights reserved by Gruppo Piazzetta S.p.A..
Connect the pellet stove to the electricity supply only after it has been
connected by an expert to the ueway.
The plug at the end of the power cable must be easily accessible after
installation.
Use only recommended wood pellets in the pellet stove (refer to
section entitled “FUEL”).
Never use liquid fuels to light the pellet stove or to relight the embers.
Ensure that the area where the stove is installed is properly ventilated
while the stove is lit.
In the event of malfunctioning the fuel supply will be stopped. Restart
the stove only after having eliminated the cause of the malfunction.
Stop using the product in the event of fault or malfunctioning.
Do not remove the protective grille from the pellet hopper.
Any build-up of unused pellets in the burner left over from repeated
failed ignitions must be removed before attempting to light the stove
again.
Stove operation can result in surfaces, handles, ue pipe and glass
becoming extremely hot. When the stove is in operation, only touch
these parts if wearing protective clothing otherwise use suitable tools.
Because of the build-up of heat on the glass, take care that those who
are unfamiliar with stove operation do not linger near the stove.
This appliance must not be used by persons (including children) with
reduced physical, sensory or mental capacities, or lack of experience
or knowledge unless they are supervised or instructed on use of the
appliance by the person who is responsible for its safety.
Creaking may be heard while the stove is in operation or cooling
down. This is not to be considered a defect, but is a consequence of
thermal expansion of the component materials.
The product you have purchased may different slightly from the one
illustrated in this booklet since the pictures are only given as an
indication and not an exact portrayal.
a In the event of difculties or if you are unable to understand
the instruction booklet, contact your local dealer.
d Do not place objects which are not heat-resistant on top of
the stove or within the recommended minimum safety area.
d Do not open the door while the stove is in operation or operate
the stove when the glass is broken.
d In case of any alarm signals do not unplug the stove: just turn
the unit OFF.
H07032120 / DT2002308 – 00
2
English
DT2010208-08
DT2010001-01
1.0 GENERAL RULES 4
1.1 Soot inspection 4
1.2 Fresh air intake 5
1.3 Outside combustion air 5
1.4 Installation environment 6
1.5 Capacity load of the floor 6
1.6 Minimum safety distances 7
1.7 Flueway 8
1.8 Interior vent installation 10
1.9 Connecting to a conventional chimney 11
1.10 Installing into an existing fireplace chimney 12
1.11 Short rise installation – Wall outlet 12
1.12 Minimum flue vent configuration 13
1.13 Venting: termination requirements 14
1.14 Prevention of domestic fires 15
1.15 Mobile home installation 16
2.0 TECHNICAL CHARACTERISTICS AND SPECIFICATIONS 17
2.1 Features 17
2.2 Technical data 17
2.3 Accessories and equipment 18
2.4 Product identification data 18
2.5 Dimensional diagram P963 19
2.6 Dimensional diagram P963 C 19
2.7 Dimensional diagram P963 D 20
2.8 Dimensional diagram P963 M 20
2.9 Wiring diagram P963 21
3.0 FUEL 22
4.0 PREPARING FOR INSTALLATION 22
5.0 INSTALLATION 23
5.1 Multifuoco System 23
5.2 Electrical connections and controls 26
5.3 Installing the external thermostat 26
5.4 Installing the Y connector (optional) 27
6.0 USE 28
6.1 Loading the pellets 28
6.2 Remote control 29
6.3 Lighting for the first time 30
6.4 Startup and normal operation 30
6.5 Troubleshooting 33
6.6 Control panel 36
6.7 Setting the language 36
6.8 Programming 37
6.9 Setting unit of temperature measurement 38
6.10 Programming the clock 39
6.11 Timer 40
6.12 Multicomfort 47
6.13 Energy Saving 47
6.14 Parameter menu 49
6.15 Enable beep (audio signal) 53
6.16 Stove status 53
6.17 Modifying the transmission unit 54
6.18 ‘Multifuoco’ system operation 54
6.19 Safety devices 55
6.20 Opening the door 59
6.21 Stove humidifier 59
6.22 Disposal of ashes 59
7.0 MAINTENANCE 60
7.1 Cleaning the grate and the grate support 60
7.2 Cleaning the ash tray 60
7.3 Cleaning the firebox 61
7.4 Cleaning the smoke chamber 61
7.5 Cleaning the flue system 62
7.6 Cleaning the ceramic cladding 62
7.7 Cleaning the enamelled metal parts 62
7.8 Cleaning the glass (daily) 62
7.9 Replacing the window 63
7.10 Replacing the remote control batteries 63
7.11 Cleaning the fans 63
7.12 When not in use 64
7.13 Scheduled maintenance 64
8.0 TROUBLESHOOTING 65
8.1 Replacing the fuses 69
Reference standards 69
CONTENTS
Section Title Page
This booklet code H07032120 / DT2002308 - 00 (06/2014) comprises 72 pages.
H07032120 / DT2002308 – 00 3
English
DT2010187-00

Produktspecifikationer

Varumärke: Piazzetta
Kategori: Värmare
Modell: P963 C

Behöver du hjälp?

Om du behöver hjälp med Piazzetta P963 C ställ en fråga nedan och andra användare kommer att svara dig




Värmare Piazzetta Manualer

Värmare Manualer

Nyaste Värmare Manualer