Pioneer DMH-342EX Bruksanvisning

Pioneer mottagare DMH-342EX

Läs nedan 📖 manual på svenska för Pioneer DMH-342EX (65 sidor) i kategorin mottagare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/65

English Français Español

DMH-342EX

DMH-341EX

DMH-340EX

DMH-241EX

DMH-240EX

DMH-130BT

RDS AV RECEIVER

RÉCEPTEUR AV AVEC RDS

RECEPTOR AV RDS

AVH-241EX

AVH-240EX

DVD RDS AV RECEIVER

RÉCEPTEUR AV RDS AVEC DVD

RECEPTOR AV RDS CON DVD

Installation Manual

Manuel d’installation

Manual de instalación

2En

WARNING

Rear visibility systems (backup cameras)

are required in certain new vehicles sold in

the U.S. and Canada. U.S. regulations

began according to a two year phase-in on

May 1, 2016, and both the U.S. and Canada

require that all such vehicles manufactured

on or after May 1, 2018 have rear visibility

systems. Owners of vehicles equipped

with compliant rear visibility systems

should not install or use this product in

a way that alters or disables that

system's compliance with applicable

regulations. If you are unsure whether

your vehicle has a rear visibility system

subject to the U.S. or Canadian regulations,

please contact the vehicle manufacturer or

dealer.

If your vehicle has a compliant backup

camera that displays the backup view

through the factory receiver, do not use

the Pioneer receiver unless it is connected

to and displays the same view as the

factory backup camera. Connection to the

factory backup camera will require an

adaptor, sold separately. Not all vehicles

may be able to connect. Please check with

a qualified professional installer for

installation options specific to your vehicle.

•Do not operate this product, any

applications, or the rear view camera

option (if purchased) if doing so will

divert your attention in any way from the

safe operation of your vehicle. Always

observe safe driving rules and follow all

existing traffic regulations. If you

experience difficulty in operating this

product, pull over, park your vehicle in a

safe location and apply the parking brake

before making the necessary

adjustments.

•Do not install this product where it may

(i) obstruct the driver’s vision,

(ii) impair the performance of any of the

vehicle’s operating systems of safety

features, including airbags, hazard lamp

buttons, or

(iii) impair the driver’s ability to safely

operate the vehicle.

In some cases, it may not be possible to

install this product because of the vehicle

type or the shape of the vehicle interior.

Important safety

information

Connection

Precautions

Your new product and this

manual

WARNING

Pioneer does not recommend that you

install this product yourself. This product is

designed for professional installation only.

We recommend that only authorized

Pioneer service personnel, who have

special training and experience in mobile

electronics, set up and install this product.

NEVER SERVICE THIS PRODUCT YOURSELF.

Installing or servicing this product and its

connecting cables may expose you to the

risk of electric shock or other hazards, and

can cause damage to this product that is

not covered by warranty.

WARNING

Do not take any steps to tamper with or

disable the parking brake interlock system

which is in place for your protection.

Tampering with or disabling the parking

brake interlock system could result in

serious injury or death.

CAUTION

•Secure all wiring with cable clamps or

electrical tape. Do not allow any bare

wiring to remain exposed.

•Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger

compartment into the engine

compartment. If the yellow lead’s

insulation tears as a result of contact with

metal parts, short-circuiting can occur,

resulting in considerable danger.

•It is extremely dangerous to allow cables

to become wound around the steering

column or shift lever. Be sure to install

this product, its cables, and wiring away

in such so that they will not obstruct or

hinder driving.

•Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts,

especially the steering wheel, shift lever,

parking brake, sliding seat tracks, doors,

or any of the vehicle’s controls.

•Do not route wires where they will be

exposed to high temperatures. If the

insulation heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

•Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse

resistor or filter, etc.) may fail to work

properly.

•Never feed power to other electronic

products by cutting the insulation of the

power supply lead of this product and

tapping into the lead. The current

capacity of the lead will be exceeded,

causing overheating.

•Use this unit with a 12-volt battery and

negative grounding only. Failure to do so

may result in a fire or malfunction.

•To avoid shorts in the electrical system,

be sure to disconnect the (–) battery

cable before installation.

WARNING

•When speaker output is used by 4

channels , use speakers over 50 W

Important safeguards

Precautions before

connecting the system

Before installing this

product

To prevent damage

3En

English

(Maximum input power) and between 4

Ω to 8 Ω (impedance value). Do not use 1

Ω to 3 Ω speakers for this unit.

•The black cable is ground. When

installing this unit or power amp (sold

separately), make sure to connect the

ground wire first. Ensure that the ground

wire is properly connected to metal parts

of the car’s body. The ground wire of the

power amp and the one of this unit or

any other device must be connected to

the car separately with different screws. If

the screw for the ground wire loosens or

falls out, it could result in fire generation

of smoke or malfunction.

•When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

•This product cannot be installed in a

vehicle without ACC (accessory) position

on the ignition switch.

•To avoid short-circuiting, cover the

disconnected lead with insulating tape. It

is especially important to insulate all

unused speaker leads, which if left

uncovered may cause a short circuit.

•For connecting a power amp or other

devices to this product, refer to the

manual for the product to be connected.

•The graphical symbol placed on

the product means direct current.

•When the ignition switch is turned on

(ACC ON), a control signal is output

through the blue/white lead. Connect to

an external power amp’s system remote

control terminal, the auto-antenna relay

control terminal, or the antenna booster

power control terminal (max. 300 mA 12

V DC). The control signal is output

through the blue/white lead, even if the

audio source is switched off.

Microphone 3 m (9 ft. 10-1/8 in.)

This product

Antenna jack

Wired remote input (SWC)

Hard-wired remote control adapter can

be connected (sold separately).

Pre out supply (REAR VIEW CAMERA

IN)

Ground wire POWER AMP

Other devices

(Another electronic

device in the car)

Metal parts of car’s

body

*1 Non supplied for this unit

ACC position No ACC position

Notice for the blue/

white lead

This product

Fuse (10 A)

Power supply

To power supply

Power cord

Yellow

To terminal supplied with power

regardless of ignition switch position.

Red

To electric terminal controlled by

ignition switch (12 V DC) ON/OFF

Orange/white

To lighting switch terminal.

Black (ground)

To vehicle (metal) body.

Violet/white

Of the two lead wires connected to the

back lamp, connect the one in which

the voltage changes when the gear shift

is in the REVERSE (R) position. This

connection enables the unit to sense

whether the car is moving forward or

backward.

Yellow/black

If you use an equipment with Mute

function, wire this lead to the Audio

Mute lead on that equipment. If not,

keep the Audio Mute lead free of any

connections.

Blue/white

Connect to system control terminal of

the power amp (max. 300 mA 12 V DC).

Light green

Used to detect the ON/OFF status of the

parking brake. This lead must be

connected to the power supply side of

the parking brake switch.

If this connection is made incorrectly

or omitted, certain functions of this

product will be unusable.

Power supply side

Parking brake switch

Ground side

To power supply

Power cord

Left

Right

Front speaker

Rear speaker

White

White/black

Gray

Gray/black

Power cord

Speaker leads

Produktspecifikationer

Varumärke:	Pioneer
Kategori:	mottagare
Modell:	DMH-342EX
Färg på produkten:	Wit
Vikt:	1280 g
Bredd:	85 mm
Djup:	137 mm
Höjd:	44 mm
Placering:	Ceiling, Wall
Maximal viktkapacitet:	3.62 kg
Rotationsvinkel:	360 °
Tiltvinkelområde:	-90 - 90 °
Harmoniserad systemkod (HS):	85189000
Antal per låda:	5 stuk(s)
Avstånd till väggen (min):	83 mm
Avstånd till vägg (max.):	137 mm