Planet GSD-1121XP Bruksanvisning
Läs nedan 📖 manual på svenska för Planet GSD-1121XP (4 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 8-Port 10/100/1000T 802.3at PoE +
2-Port 2.5G 802.3at PoE + 1-Port 10G SFP+ Ethernet Switch, GSD-1121XP.
In the following sections, the term means the “802.3at PoE+ Switch”
GSD-1121XP.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items:
802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1
SFP Dust Cap
x 1 Screws x 8 Rack-mounting
Brackets x 2 Rubber Feet x 4
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
2.2 LED Indicators
System
LED Color Function
PWR Green Lit: It indicates it has power.
Per Gigabit TP Port
2
1
4
3
6
5
8
7
LED Color Function
PoE-in-Use Amber
Lights to indicate that the port is providing
PoE to remote powered device.
O to indicate that the port is not a PoE
powered device (PD).
10/100/1000
LNK/ACT Green
Lights to indicate that the copper port is
successfully connecting to the network at
10/100/1000Mbps.
Blinks to indicate the copper port is receiving
or sending data.
3. Hardware Installation
3.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions described below.
Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with
the front panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with supplied screws attached to the package. Figure
3-1 shows how to attach brackets to one side of the 802.3at
PoE+ Switch.
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP
+
Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.
Caution
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
2.3 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power
socket and a switch, which accepts input power from 100 to 240V AC,
50-60Hz, 2.5A.
100-240V , 2.5A max.
50/60Hz
Figure 2-2: GSD-1121XP Switch Rear Panel
AC Power Receptacle
Power
Notice
The device is a power-required device, which means
it will not work till it is powered. If your networks
should be active all the time, please consider using UPS
(uninterrupted power supply) for your device. It will
prevent you from network data loss or network downtime.
Power
Notice
In some areas, installing a surge suppression device may
also help to protect your 802.3at PoE+ Switch from being
damaged by unregulated surge or current to the 802.3at
PoE+ Switch or the power adapter.
2. Hardware Introduction
2.1 Switch Front Panel
The front panel of the 802.3at PoE+ Switch consists of 8 auto-sensing
10/100/1000BASE-T RJ45 ports, 2 auto-sensing 100/1G/2.5GBASE-T RJ45
ports and 1 10GBASE-X SFP+ port. Figure 2-1 shows the front panel of
the 802.3at PoE+ Switch.
Front View
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
7 9 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
Figure 2-1: GSD-1121XP Front Panel
■ GigabitTPInterface
Eight 10/100/1000BASE-T RJ45 ports with 802.3af/at PoE+ injector
function, and auto-MDI/MDI-X
■ 2.5GTPInterface
Two 100/1G/2.5GBASE-T RJ45 ports with 802.3af/at PoE+ injector
function, and auto-MDI/MDI-X
■ 10GSFP+Port
One 10GBASE-X SFP+ port for transceiver module, enabling to have
a networking distance of 300 meters to 2km (multi-mode ber) and
10/20/40/60/80 kilometers (single-mode ber)
Per 2.5G TP Port
9 10
2.5G
LED Color Function
PoE-in-Use Amber
Lights to indicate that the port is providing
PoE to remote powered device.
O to indicate that the port is not a PoE
powered device (PD).
100/1G/2.5G
LNK/ACT Green
Lights to indicate that the copper port is
successfully connecting to the network at
100/1000/2500Mbps.
Blinks to indicate the copper port is receiving
or sending data.
10G SFP+ Port
PWR
11
ACT
LNK10G
11
10G
SFP+
LED Color Function
Fiber
LNK/ACT Amber
Lights to indicate that the ber optic port
is successfully connecting to the network at
10Gbps.
Blinks to indicate the ber optic port is
receiving or sending data.
2.4 GroundingtheDevice
Users MUST complete grounding wired with the device; otherwise, a
sudden lightning could cause fatal damage to the device.
100-240V , 2.5A max.
50/60Hz
Earth Ground
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
Step 5: After the brackets are attached to the 802.3at PoE+ Switch,
use suitable screws to securely attach the brackets to the
rack, as shown in Figure 3-2.
PoE-in- U s e
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP
+
Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at
complied PDs and other network devices.
A. Connect one end of a standard network cable to the
100/1G/2.5GBASE-T RJ45 ports or 10GBASE-X SFP+ port on the
front panel of the 802.3at PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall
outlet.
When the 802.3at PoE+ Switch receives power, the Power LED should
remain solid Green.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
3.2 InstallingtheSFP+Transceiver
The sections describe how to insert an SFP+ transceiver into an SFP+
port of the 802.3at PoE+ Switch.
The SFP+ transceivers are hot-pluggable and hot-swappable. You can
plug in and out the transceiver to/from any SFP+ port without having to
power down the 802.3at PoE+ Switch, as the Figure 3-3 shows.
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
79 10 1
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
MTB-Series SFP+ Transceiver
LC Fiber Cable
1
2
Figure5-3: Plugging in the SFP+ Transceiver
Approved PLANET SFP+ Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-
mode SFP+ transceivers. The following website link of approved PLANET
SFP+ transceivers is correct at the time of publication:
http://www.planet.com.tw/en/product/product.php?id=11027
Note
It is recommended to use PLANET SFP+ on the 802.3at
PoE+ Switch. If you insert an SFP+ transceiver that is not
supported, the 802.3at PoE+ Switch will not recognize it.
Weight 1711g
Power Requirements 100~240V AC, 50/60Hz
Power Consumption/
Dissipation
124 watts @ AC 110V
125 watts @ AC 240V
LED
1 x LED for Power:
Green: AC Power
2 x LED for Per Copper Port (Port-1~Port-8):
Green: 10/100/1000 LNK/ACT
Amber: PoE-in-Use
2 x LED for Per Copper Port (Port-9~Port-10):
Green: 100/1G/2.5G LNK/ACT
Amber: PoE-in-Use
1 x LED for SFP+ interface (Port-11)
Amber: 10G LNK/ACT
Switching Specication
Switch Processing
Scheme Store-and-Forward
Switch fabric 46Gbps
Throughput
(packet per second) 34.2Mpps @64 bytes
Address Table 16K entries
Jumbo Frame 9600 Bytes
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
1. Before we connect the 802.3at PoE+ Switch to the other network
device, we have to make sure both sides of the SFP+ transceivers
are with the same media type, for example, 10GBASE-SR to
10GBASE-SR; 10GBASE-LR to 10GBASE-LR.
2. Check whether the ber-optic cable type matches with the SFP+
transceiver requirement.
To connect to 10GBASE-SR SFP+ transceiver, please use the
multi-mode ber cable with one side being the male duplex LC
connector type.
To connect to 1000BASE-LR SFP+ transceiver, please use the
single-mode ber cable with one side being the male duplex LC
connector type.
4.ProductSpecications
Model GSD-1121XP
Hardware Specications
Copper Ports
8 x 10/100/1000BASE-T RJ45
2 x 100/1G/2.5GBASE-T RJ45
With 802.3at/af PoE+ injector function
Auto-MDI/MDI-X, auto-negotiation
SFP+ Port 1 x 10GBASE-X SFP+ interface
ESD Protection 6KV contact/8KV air
EFT Protection 1KV
Installation Desktop or rack-mount installation
Dimensions
(W x D x H) 280 x 214 x 44mm
Power over Ethernet
PoE Standard IEEE 802.3at/af PoE Plus, PSE
PoE Power Supply
Type End-span
PoE Power Output Per port 52V DC, max. 30 watts
Power Pin
Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts
Standards Conformance
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az EEE (Energy Ecient Ethernet)
IEEE 802.3bz 2.5G BASE-T
Regulatory
Compliance FCC Part 15 Class B, CE
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
5.PhysicalDimensions
The GSD-1121XP 802.3at PoE+ Switch dimensions (W x D x H): 280 x
214 x 44mm
100-240V , 2.5A max.
50/60Hz
Unit: mm
PoE-in-U se
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
6.CustomerSupport
Thank you for purchasing PLANET products. You can browse our online
FAQ resource on PLANET web site rst to check if it could solve your
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2021
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Produktspecifikationer
| Varumärke: | Planet |
| Kategori: | Växla |
| Modell: | GSD-1121XP |
Behöver du hjälp?
Om du behöver hjälp med Planet GSD-1121XP ställ en fråga nedan och andra användare kommer att svara dig
Växla Planet Manualer
23 September 2024
22 September 2024
22 September 2024
21 September 2024
21 September 2024
21 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
Växla Manualer
- Växla Bosch
- Växla IKEA
- Växla Huawei
- Växla HP
- Växla Panasonic
- Växla Honeywell
- Växla Yamaha
- Växla Alcatel
- Växla Alecto
- Växla Ansmann
- Växla Edimax
- Växla Intermatic
- Växla Flamingo
- Växla Brennenstuhl
- Växla Hikvision
- Växla Generac
- Växla Silvercrest
- Växla Nedis
- Växla Pyle
- Växla Renkforce
- Växla TP Link
- Växla Worx
- Växla Black Box
- Växla Elro
- Växla KlikaanKlikuit
- Växla Tripp Lite
- Växla DataVideo
- Växla Schneider
- Växla Theben
- Växla Chamberlain
- Växla Sylvania
- Växla Velleman
- Växla Tork
- Växla Techly
- Växla Emerson
- Växla Totolink
- Växla Vemer
- Växla Profile
- Växla Matrox
- Växla Steren
- Växla Perel
- Växla Engenius
- Växla Digitus
- Växla Kathrein
- Växla AV:link
- Växla Belkin
- Växla Linksys
- Växla Dahua Technology
- Växla Audiovox
- Växla Cotech
- Växla Netgear
- Växla LevelOne
- Växla Kaiser
- Växla QNAP
- Växla Boss
- Växla Shimano
- Växla Merten
- Växla Hager
- Växla Chacon
- Växla Elation
- Växla Sygonix
- Växla ZyXEL
- Växla Rex
- Växla Powerfix
- Växla Konig
- Växla Tesla
- Växla D-Link
- Växla Tenda
- Växla UPM
- Växla One For All
- Växla Finder
- Växla Marmitek
- Växla Delta Dore
- Växla Ubiquiti Networks
- Växla EBERLE
- Växla Grasslin
- Växla Omnitronic
- Växla Jung
- Växla CyberPower
- Växla Basetech
- Växla Trendnet
- Växla Mikrotik
- Växla WHALE
- Växla ATen
- Växla RGBlink
- Växla Gefen
- Växla Nexa
- Växla Adder
- Växla Wago
- Växla Homematic IP
- Växla Monoprice
- Växla Tiptel
- Växla OSD Audio
- Växla SPC
- Växla Crestron
- Växla Unify
- Växla ORNO
- Växla Berker
- Växla Provision ISR
- Växla Monacor
- Växla PCE
- Växla Logilink
- Växla Smart-AVI
- Växla StarTech.com
- Växla SIIG
- Växla Advantech
- Växla IOGEAR
- Växla Micro Connect
- Växla Extron
- Växla KanexPro
- Växla Blustream
- Växla Avocent
- Växla Intellinet
- Växla Ebode
- Växla Lancom
- Växla Robbe
- Växla B-tech
- Växla Speaka
- Växla Kopp
- Växla Vimar
- Växla Kemo
- Växla GAO
- Växla H-Tronic
- Växla Legrand
- Växla Kraus & Naimer
- Växla Noble
- Växla Intertechno
- Växla Ecler
- Växla Inverto
- Växla Triax
- Växla Kramer
- Växla CYP
- Växla Suevia
- Växla Phoenix Contact
- Växla Seuthe
- Växla SmartAVI
- Växla Cudy
- Växla Lindy
- Växla Ernitec
- Växla Atlona
- Växla Adviti
- Växla Paladin
- Växla Equip
- Växla Noark
- Växla Vivolink
- Växla Cambium Networks
- Växla 2USB
- Växla Roline
- Växla KVM-TEC
- Växla AMX
- Växla BZBGear
- Växla STI
- Växla Epiphan
- Växla Mach Power
- Växla Axing
- Växla Juniper
- Växla Raritan
- Växla ConnectPro
- Växla SunBriteTV
- Växla Atlantis Land
- Växla GEV
- Växla Pizzato Elettrica
- Växla Baco
- Växla SEADA
- Växla Doepke
- Växla Comet
- Växla IPGARD
- Växla CSL
- Växla Setti+
- Växla PureLink
Nyaste Växla Manualer
27 Oktober 2024
27 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
19 Oktober 2024
19 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024