PlayBridgeDealer Dealer4 Maintenance Bruksanvisning

PlayBridgeDealer Diverse Dealer4 Maintenance

Läs nedan 📖 manual på svenska för PlayBridgeDealer Dealer4 Maintenance (36 sidor) i kategorin Diverse. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/36
__________________________________________1_________________________________________
Dealer4 Maintenance, Adjusting and Cleaning Manual ver: 1.1
Version information:
Ver 1.0: First issued : 14/04/2008
- use word “Board” instead of “Card Box”
- combine with “Delaer4 Adjusting Manual 1V0”
Ver 1.1 issued: 30/01/2014
- added Front Board Pocket Adjustment
- added Adjustment of Gates
- updated instructions and materials to represent newest version of Dealer 4 machines
__________________________________________2_________________________________________
1 Dealer4 Maintenance....................................................................3
2 Dealer4 Cleaning ...........................................................................5
2.1 Cleaning tools......................................................................................... 5
2.2 Cleaning Feeder Rollers..........................................................................6
2.3 Cleaning Driving Rollers..........................................................................7
2.4 Cleaning the Camera and illumination LEDs............................................9
2.5 Cleaning photointerruptors.................................................................. 11
3 Dealer4 Adjustments................................................................... 15
3.1 Feeder Gap Adjustment ....................................................................... 15
3.1.1 Define proper gap size........................................................................................17
3.1.2 Measure existing gap size...................................................................................18
3.1.3 Feeder gap adjustment for machines with serial numbers less than 5027 ............20
3.1.4 Feeder gap adjustment for machines with serial numbers 5028 and above .........23
3.1.5 Adjusting the Feeder Gap without a Feeler Gauge ..............................................25
3.2 Card Width Adjustment........................................................................ 28
3.3 Board Pocket Adjustment..................................................................... 30
3.4 Front Board Pocket Adjustment ........................................................... 31
3.5 Inspection and Adjustment of Gates .................................................... 32
__________________________________________3_________________________________________
1 Dealer4 Maintenance
In this manual the following signs are used to highlight important information:
Critical information for safety and proper machine operation. Always read and follow.
Warnings
Additional important information
The Dealer4 is designed to operate without any special maintenance. Apart from the cleaning and
adjustment when required (see chapter 3) there is no other regular maintenance required. The Dealer4
does not require any lubrication, there are no belts, seals or any other elements which have to be
replaced on a regular basis by the user.
Despite that the Dealer4 is virtually maintenance free it is recommended that the machine be serviced
by an authorized Service Center at least every 3 years or every 40000 dealt boards. During these services
the machine will be disassembled, thoroughly cleaned, all parts will be checked and replaced if required.
Then the machine will be adjusted and tested. Serviced machines will provide correct, reliable operation
and decrease possibility of malfunction.
The only elements which are subject to wear during normal operation are the rubber rollers. There are
two types of rollers used in the machine
- 4 Pairs of Green polyurethane rollers used as a Drive Rollers. Some older machines may still have black
rubber Drive Rollers. These typically last 40000 deals.
For machines with a Serial Number less than 4218:
- 2 Black Rubber Feeder Rollers
For machines with a Serial Number 4218 and above:
- 1 Long Feeder Roller. These may be varying colors such as black, blue or grey.

Produktspecifikationer

Varumärke: PlayBridgeDealer
Kategori: Diverse
Modell: Dealer4 Maintenance

Behöver du hjälp?

Om du behöver hjälp med PlayBridgeDealer Dealer4 Maintenance ställ en fråga nedan och andra användare kommer att svara dig




Diverse PlayBridgeDealer Manualer

Diverse Manualer

Nyaste Diverse Manualer