Positivo 24BL550J Bruksanvisning

Positivo Övervaka 24BL550J

Läs nedan 📖 manual på svenska för Positivo 24BL550J (5 sidor) i kategorin Övervaka. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
1/5
Product Disassembly instructions for End of Life
Product Identification:
Marketing Name / Model
Description
24BL550J
24
Purpose: The document is intended for use by end- -life recyclers or treatment facilities. It of
provides the basic instructions for the disassembly of products to remove components and materials
requiring selective treatment.
1. Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a
point where components and materials requiring selective treatment can be removed.
Tool Description
Screw driver Phillips and hexagonal N5
Plastic ZIG
Gloves
Pliers
2. Product disassembly Process
2.1 List the basic steps that should typically be followed to remove components and materials
requiring selective treatment:
Referência: DIRETIVA 2012/19 / EU - Anexo VII
Modelo: MONITOR 24BL550J
Item Descr ição Obser vação Quantidade
1 Baterias 0
2 Cabos e fios elétricos externos D-sub, HDMI, DP E CABO DE ENERGIA 4
3 Capacitores / condensadores (contendo PCB / PCT) 0
4
Capacitores / condensadores eletrolíticos medindo mais de 2,5 cm de diâmetro ou altura PSU 1
5
Componentes contendo mercúrio 0
6 Componentes e peças contendo toner e tinta, incluindo líquidos, semilíquidos (gel / pasta) e toner 0
7 Componentes e resíduos contendo amianto 0
8 Componentes, peças e materiais contendo fibras cerâmicas refratárias 0
9 Componentes, peças e materiais contendo substâncias radioativas 0
10 Lâmpadas de descarga de gás 0
11
Monitores de cristal líquido (LCD) com superfície superior a 100 cm2 LED LCD 1
12
Placas de circuito impresso (PCB) ou conjuntos de circuito impresso (PCA) MAIN, CONTROL AND POWER PCB 3
13
Plásticos contendo retardadores de chama bromados pesando> 25 gramas (com exceção dos PCBs ou PCAs 0
14 Tubos de raios catódicos (CRT) 0
Lista Materiais e componentes de resíduos elétricos e eletrônicos que requerem tratamento sele tivo
2/5
2.2 OPTIONAL Depending upon the complexity of the disassembly process, a graphic depicting :
the locations of items contained within the product which require selective treatment (with descriptions
and arrows identifying locations) can be inserted below:
2.3 How to write
1) Provide a picture of disassembly process
2) All the screws are showed in the picture
3) All the PCBAs are showed in the picture
4) LCD panel are showed in the picture
5) All the accessories like remote controller, batteries, cables are showed in the picture and
3. Related regulations: WEEE directive, EPEAT
Main Parts:
3/5
Step 1 - Put the MNT on the clean vinyl.
Step 2 Turn the Height Stand to Right Side and push the pin to down to remove the Height
Stand

Produktspecifikationer

Varumärke: Positivo
Kategori: Övervaka
Modell: 24BL550J

Behöver du hjälp?

Om du behöver hjälp med Positivo 24BL550J ställ en fråga nedan och andra användare kommer att svara dig




Övervaka Positivo Manualer

Övervaka Manualer

Nyaste Övervaka Manualer