PowerBox Systems PBR-12X Bruksanvisning

Läs nedan 📖 manual på svenska för PowerBox Systems PBR-12X (12 sidor) i kategorin Radiostyrda leksaker. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
Instruction Manual
PB
2PowerBox-Systems − World Leaders in RC Power Supply Systems
Dear PowerBox Customer,
Congratulations on your decision to install a PowerBox in your model. PBR-12X
This unit represents the most compact power supply system available anywhere
at present.
The -PBR-12X offers full telemetry capability in addition to its role as high-perfor
mance power supply system with electronic switch.
We are condent that you will have great pleasure and success with your PBR-12X!
1.Installation, connections
In order to minimise the unit’s dimensions, the case does not feature mounting
lugs; instead the is installed using the self-adhesive pad supplied in the PBR-12X
set. Since the unit is so light and compact, this represents an excellent method of
mounting.
The PBR-12X can be used with any of four radio control systems: PowerBox
CORE/ATOM P²BUS, Jeti EX-BUS, Spektrum SRXL2 and Futaba S.BUS2. All four
systems share a particular characteristic: servo-signals and telemetry data are
carried on a single bus cable. This eliminates the need for a second patch lead for
telemetry data, as is still required for other systems.
The PBR-12X automatically detects the system to which it is connected; it may
take a few seconds for the system to be recognised unambiguously the rst time
it is plugged in. However, once detected, the type is saved, and the system starts
without delay next time it is switched on.
This means that the system is Plug‘n Play, unless you wish to adjust the fail-safe
www.powerbox-systems.com 3
positions, the frame rate or the capacity reset channel.
CORE- and Jeti-users have the facility to carry out all adjustments from the trans-
mitter. Alternatively a USB-adapter can be used; this is a requirement for Futaba
and Spektrum pilots. With this arrangement everything can be set up using the
associated Terminal-App.
Connecting the battery
It is essential to maintain correct polarity. Use the adapter lead; if you wish to use
a connector other than the MPX connector, note that red = positive and black =
negative.
Connecting the switch
Plug the switch into the appropriate socket. The can be supplied either PBR-12X
with a button switch or the MicroMag magnet switch.
The button switch operates in the same way as with all PowerBox systems: hold
the button pressed in until the LED starts ashing at a high rate. Release the button
briey, then press it again briey: the LED now glows a constant green to indicate
that it is switched on. Repeat the procedure to switch off.
If you have a MicroMag switch, hold the magnet over the switch until the, PBR-12X
switches on. The LED turns blue as soon as the switch registers a magnet. When
the switching process is complete, the LED turns red. The LED then glows green to
indicate that it is switched on.
Connecting the USB interface adapter
If required, the USB interface adapter should be plugged into the input socket mar-
ked RX2. The RX2 input can only be activated for Terminal when it is switched on.
If you have already connected a receiver to RX2, you must restart the PBR-12X
without a receiver at RX2 in order to activate the Terminal function.

Produktspecifikationer

Varumärke: PowerBox Systems
Kategori: Radiostyrda leksaker
Modell: PBR-12X

Behöver du hjälp?

Om du behöver hjälp med PowerBox Systems PBR-12X ställ en fråga nedan och andra användare kommer att svara dig




Radiostyrda leksaker PowerBox Systems Manualer

Radiostyrda leksaker Manualer

Nyaste Radiostyrda leksaker Manualer