Powerplus POWXG9402 Bruksanvisning

Powerplus Pomp POWXG9402

Läs nedan 📖 manual på svenska för Powerplus POWXG9402 (7 sidor) i kategorin Pomp. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/7
POWXG9402 EN
Copyright © 2 VARO 016 NV Page | 1www.varo.com
1 APPLICATION .................................................................................. 2
2 DESCRIPTION (FIG A) .................................................................... 2
3 PACKAGE CONTENT LIST ............................................................. 2
4 SYMBOLS ........................................................................................ 2
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3
6 BEFORE START-UP, NOTE THE FOLLOWING! ........................... 3
7 INSTALLATION ................................................................................ 3
8 SETTING TO WORK ........................................................................ 4
8.1 Setting the ON/OFF operating point 4 .......................................................................
9 CLEANING AND MAINTENANCE ................................................... 4
9.1 Maintenance guidelines .......................................................................................... 4
9.2 Cleaning the impeller .............................................................................................. 5
10 TECHNICAL DATA .......................................................................... 5
11 SERVICE DEPARTMENT ................................................................ 5
12 TROUBLESHOOTING ..................................................................... 6
13 STORAGE ........................................................................................ 6
14 WARRANTY ..................................................................................... 6
15 ENVIRONMENT ............................................................................... 7
16 DECLARATION OF CONFORMITY ................................................ 7
POWXG9402 EN
Copyright © 2 VARO 016 NV Page | 2www.varo.com
SUBMERSIBLE PUMP 400W
POWXG9402
1 APPLICATION
This pump is used primarily as cellar pump. When installed in a shaft, the pump provides
protection from flooding.
It is also used wherever water has to be moved from one place to another, e.g. in the home,
agriculture, horticulture, plumbing and many other applications.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Motor housing
2. Water inlet
3. Water outlet
4. Cable & plug
5. Floating switch
6. Carrying handle
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
Submersible pump with 10m electric cable (RNF) with earthed plug
Outlet connection.
manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury or
damage to the tool.
Read manual before use
In accordance with essential requirements of the European directive(s)
POWXG9402 EN
Copyright © 2 VARO 016 NV Page | 3www.varo.com
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
6 BEFORE START-UP, NOTE THE FOLLOWING!
The pump can be connected to any shock-proof plug which has been installed according
to regulations. The plug must have a supply voltage of 230V ~ 50Hz. Fuse min. 6 Amp.
Caution!
When the pump is to be used near swimming pools or garden ponds and in their area of
protection, it must be equipped with a PRCD (residual current circuit breaker) with a nominal
trip current of max. 30 mA (according to VDE 0100, part 702 and 738). The pump must not be
operated while people are in the swimming pool or in the garden pond! Please contact your
electrician!
Caution! This pump is not suitable for continuous use!
Attention!
(Important for your own security) Before starting to run your new submersible pump, please
have the following items checked by an expert:
Ground connection
Zero conductor
Fault current breaker switch must correspond the safety regulations of the power plants
and they must work faultlessly.
The electrical connections must be protected from moisture.
If there is danger of flooding, the electrical connections must be taken to higher ground.
Circulation of aggressive fluids, as well as the circulation of abrasive materials must be
avoided at all costs.
The submersible motor-driven pump must be protected from frost.
The pump must be protected from running dry.
Access on the part of children should also be prevented with appropriate measures.
Consistency
Your submersible pump is designed for the circulation of water with a maximum temperature
of 35° C. This pump may not be used for other fluids, especially motor fuels, cleaning fluids,
and other chemical products!
7 INSTALLATION
The submersible motor pumps is installed as follows:
In a stationary position with fixed pipeline
or
in a stationary position with a flexible hose pipe.
Please note!
You should never install the pump by suspending it unsupported from its delivery pipe or
power cable. The submersible motor pump must be suspended from the specially provided
handle or be placed on the bottom of the shaft. To guarantee that the pump works properly,
the bottom of the shaft must be kept free of sludge and dirt of all kinds.
If the level of water sinks too far, any sludge in the shaft will dry out quickly and stop the pump
from starting up. ,Therefore it is necessary to check the submersible motor pump regularly (by
carrying out start-up tests). The floater is adjusted in a way that the pump can immediately be
started

Produktspecifikationer

Varumärke: Powerplus
Kategori: Pomp
Modell: POWXG9402

Behöver du hjälp?

Om du behöver hjälp med Powerplus POWXG9402 ställ en fråga nedan och andra användare kommer att svara dig


Pomp Powerplus Manualer

Powerplus

Powerplus POWXG9513 Bruksanvisning

7 Oktober 2024
Powerplus

Powerplus POWXG9402 Bruksanvisning

19 Augusti 2024
Powerplus

Powerplus POWEW67900 Bruksanvisning

17 Augusti 2024
Powerplus

Powerplus POWXG9504 Bruksanvisning

17 Augusti 2024
Powerplus

Powerplus POWXG9561 Bruksanvisning

12 Augusti 2024

Pomp Manualer

Nyaste Pomp Manualer

JANDY

JANDY JCP07-3AT-S Bruksanvisning

27 Oktober 2024
Gude

Gude INOX 100/24 Bruksanvisning

26 Oktober 2024
Vivaria

Vivaria Vario N-3000 Bruksanvisning

26 Oktober 2024
Maruyama

Maruyama MS655 Bruksanvisning

26 Oktober 2024
Gardena

Gardena RWT Pump 2000/2 Li-18 Bruksanvisning

16 Oktober 2024
Ozito

Ozito PTP-012A Bruksanvisning

15 Oktober 2024
MSW

MSW -AN-100 Bruksanvisning

15 Oktober 2024
MSW

MSW -MN34 Bruksanvisning

15 Oktober 2024
MSW

MSW -MN34M Bruksanvisning

15 Oktober 2024
MSW

MSW -AOP40S Bruksanvisning

15 Oktober 2024