Pro-Lift B-S12D Bruksanvisning

Pro-Lift Inte kategoriserad B-S12D

Läs nedan 📖 manual på svenska för Pro-Lift B-S12D (24 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/24
Hydraulic
Bottle Jacks
B-002D-M1_042017_EN-FR-ES
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
! WARNING
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic jack.
ALWAYS use a pair of adequately rated
jack stands.
Operating Instructions & Parts Manual
Models B-S12D, B-S20D
Models B-008D, B-012D, B-020DModels B-002D, B-004D, B-006D
Models: B-002D, B-004D B-006D B-008D, B-012D, B-020D, B-S12D, B-S20D
2
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Pro-Lift Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle.
Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands.
WARNING: Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted load
with a pair of appropriately rated jack stands.
SPECIFICATIONS
Model Capacity Base Size
(L x W)
Min.
Height
Max.
Height
Extension
Screw
B-002D 2 Ton 3-1/2" x 3-5/8" 7-1/2" 13-5/8" 1-7/8"
B-004D 4 Ton 4-1/4" x 4-1/8" 8" 15-1/2" 2-3/8"
B-006D 6 Ton 4-1/2" x 4-3/8" 8-1/2" 16-5/8" 3"
B-008D 8 Ton 4-5/8" x 4-5/8"" 8-7/8" 17-3/8" 2-3/4"
B-012D 12 Ton 5-1/2" x 5-1/4" 9-1/2" 18-3/4" 3-1/8"
B-S12D 12 Ton 5 1/2" x 5 1/4" 6" 10 5/8" 1 1/2"
B-020D 20 Ton 6 1/4" x 6 1/8" 9 1/2" 18 5/8" 3 1/8"
B-S20D 20 Ton 6 1/4" x 6 1/8" 6 1/2" 11 1/8" 1 5/8"
!
3
PREPARATION
Before Use
1. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the
product, its components and recognize the hazards associated with its use.
2. Verify that the product and application are compatible, if in doubt call Pro-Lift Technical Service (888) 332-6419.
3. Assemble handle, ensure spring clips align with slots.
4. To familiarize yourself with basic operation, use the notched end of provided Pump Handle to engage and turn
the Release Valve:
a. Clockwise until rm resistance is felt to further turning. This is the ‘CLOSED’ Release Valve position used to
raise the ram plunger.
b. Counter-clockwise, but no more than 1/2 turn from the closed position. This is the ‘OPEN’ Release Valve
position used to lower the Ram Plunger.
5. With Ram Plunger fully retracted and release valve closed, pump the operating handle. If Ram Plunger responds
immediately, jack is ready for use. If jack does not respond, follow Bleeding/Venting Trapped Air instruction
below.
6. Check that the pump operates smoothly and that the Extension Screw will thread up/down easily before putting
into service. Replace worn or damaged parts and assemblies with Pro-Lift authorized replacement parts only.
Bleeding/Venting Trapped Air
With the Release Valve in the OPEN position (step 4b above) and with Ram Plunger fully lowered, locate and remove
the Oil Filler Plug/Screw. Insert the Pump Handle into the Handle Sleeve; then pump 6 to 8 full strokes. This will help
release any pressurized air which may be trapped within the reservoir. Oil level should be even with the bottom of
the oil ller hole. Reinstall the Oil Filler Plug/Screw.
Figure 1 - Typical Bottle Jack Nomenclature (B-002D shown)
Release Valve
Ram Plunger
Saddle
Handle Sleeve
Two-Piece Handle

Produktspecifikationer

Varumärke: Pro-Lift
Kategori: Inte kategoriserad
Modell: B-S12D

Behöver du hjälp?

Om du behöver hjälp med Pro-Lift B-S12D ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Pro-Lift Manualer

Pro-Lift

Pro-Lift B-S12D Bruksanvisning

14 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024