Projecta SPP160K Bruksanvisning

Projecta Solpanel SPP160K

Läs nedan 📖 manual på svenska för Projecta SPP160K (8 sidor) i kategorin Solpanel. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

MONOCRYSTALLINE

12 VOLT

SOLAR PANEL KITS

P/No. SPP160K

WARNING

SOLAR PANEL

• For installations with lead acid batteries, avoid sparks or flames near the batteries and

always use proper eye protection

• Given sufficient light, solar panels always generate energy even when they are disconnected

• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a

fire hazard

• Do not scratch or bend solar panels

• Do not disassemble the solar panel

• When mounting solar panels at a height adhere to all relevant safety regulations

• Do not walk on modules

• Do not attempt to increase module output by concentrating light on its surface with mirrors

• Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum

current ratings

• When storing the Solar panel kit do not pack heavy items on top the Solar panel bag

• Do not disassemble the controller. Take to a qualified person if the unit requires repairing

FEATURE OVERVIEW

SOLAR PANEL

Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that

is cast from silicon. These cells are more efficient at producing power than an amorphous panels,

so the size of the panel is smaller yet produces greater output power.

Heavy Duty Frame – Corrosion resistant frames are constructed to withstand wind speeds in

excess of 130 km/h in typical ground mounted applications. The frames are black anodized and

the corner connection has a strong mechanical resistance to weather.

Convenient Carry Bag – This durable padded bag protects your solar panel during storage

and transportation.

Carry Handle & Safety Latches – It is easy to carry the solar panels whilst out of the bag with

the carry handle and using the safety latches to keep the solar panels closed shut.

5 Meter Lead with Battery Clamps – 5 meter battery leads are connected to the solar panels

with battery clamps, so all you have to do is connect to the battery.

Fold Away Support Legs – The convenient support legs fold out from the rear to allow

easy mounting on flat ground. The legs place the panels at an optimum angle for maximum

performance.

P/No. SPP160K

TYPE MONOCRYSTALLINE

RATED POWER 160W

OPEN CIRCUIT VOLTAGE 22.6V

SHORT CIRCUIT CURRENT 10.2A

PEAK POWER VOLTAGE 17.0V

PEAK POWER CURRENT 9.42A

TEST CONDITIONS 1000W/m2, 25˚C

BATTERY CONNECTIONS Battery Clamps

SPECIFICATIONS

SOLAR CONTROLLER

Advanced MCU – Features control pulse width modulated (PWM) technology, high efficiency

operation.

Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.

5 Stage solar controller – Built in regulator to prevent your battery from being overcharged.

Overcharging occurs when the charge voltage is unregulated. This can result in premature

battery failure.

The regulator also prevents your battery from being under charged, in the solar energy field,

battery undercharge always occurs, especially on some Conventional lead – acid or Calcium

batteries; The unit provides an automatic Equalization feature for deeply drained Conventional

lead acid batteries or Calcium batteries.

It keeps the battery fully charged by using a process called “floating”. This means the controller

will stop charging when the battery is full and will automatically start charging the battery as

required. This process will also reduce water loss and help prevent the battery from ‘drying out’.

Multi-Chemistry – Suitable for charging Gel, AGM (Sealed), Conventional lead-acid (WET) and

Calcium batteries.

Discharge Protection – Protects your battery from discharge at night. Under low light or no

light conditions the solar panel voltage could be less than the battery voltage. The unit contains

a special circuit which prevents current flowing back from the battery and into the solar panel.

LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.

Unit Protection – Protects against reverse polarity, short circuit, over temperature, over voltage, etc.

BATTERY TYPE SELECTION

Please check your battery manufacturer’s specifications to select correct battery type.

The unit provides 4 battery types for selections: Gel, AGM, WET (conventional lead acid),

and Calcium.

There is a DIP switch at the back of the solar charge controller, this Dip switch is used for

presetting your battery type. Please refer to Figure 1.1 to make DIP switch setting for the

proper battery chemical; the factory default setting is at AGM battery type.

Produktspecifikationer

Varumärke:	Projecta
Kategori:	Solpanel
Modell:	SPP160K
Färg på produkten:	Black, Red
Vikt:	42 g
Bredd:	79 mm
Djup:	46 mm
Höjd:	32 mm
Sladdlängd:	0.7 m
Vormfaktor:	Ambidextrous
Avsedd för:	Kantoor
siffra:	1
Rekommenderad användning:	PC
Antal knappar:	3
Förbindelse:	USB Type-A
Rulla typ:	Wiel
Rörelseupplösning:	1200 DPI
Typ av knappar:	Drukknoppen