Psiber CM450 CableMaster Bruksanvisning

Psiber Mätinstrument CM450 CableMaster

Läs nedan 📖 manual på svenska för Psiber CM450 CableMaster (8 sidor) i kategorin Mätinstrument. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

CableMaster

CM450

Quick Start Guide

Testing:

A. Plug the wire into the correct Test Port, Ethernet to RJ45

B. Plug the opposite end into the Main Remote

C. Press Network Button

D. The LCD Display reports wire condition, Pass/Fail

E. To turn off, press O/ID Button

Toning:

A. With the unit turned OFF, hold down the LENGTH/TONE button until

LCD illuminates

B. To select a tone cadence, press the LENGTH/TONE button repeatedly to step

through the four cadence options: HI, LO, Hi-Lo1, and Hi-Lo1. Stop when you

reach the option you want. The option you select determines the cadence sent

from the main tester, through the cable, and picked up by the tone tracer probe.

C. Press the appropriate cable type button (voice, video, or data) to select a

cable for the tone signal

* Note: Tone is detected by a tone tracer probe

Length Measurement:

A. Make sure the CM450 is turned OFF.

B. Insert the cable plug into the corresponding receiver on the main tester (RJ-11

jack for voice cable, RJ-45 jack for data cables, F-Connector for video cables).

C. Press the LENGTH/TONE button to enter Length Mode.

D. Press the cable type button corresponding to the connector in use.

Features:

Testing: CM450 shows Opens, Shorts, Miswires, Split Pairs, PASS and

FAIL results quickly.

Toning: CM450’s built-in tone generator is a ﬂ exible and function-packed

tone generator. Its conﬁ gurable signal can be generated to ﬁ nd and ﬁ x the

position on any type of cable - either exposed or hidden, in ceilings or

behind walls.

Length: CM450 determines the length (in feet or meters) of an entire cable and/

or individual wire pairs within the cable.

Option: CM450 is supported by (1-19) wiremapping ID locators (Network/Coax)

and (1-8) testing/ID remotes (Network/Telephone).

Button Function

1. LCD Display

2. Voice Mode

3. Video Mode

4. Data Mode

5. Length/Tone Mode

6. On/Off and ID Mode

7. Main Unit Remote

(RJ11, RJ45)

CableMaster

CM450

Quick Start Guide

Kurzanleitung

Guide de Démarrage Rapide

CableMaster

CM450

Quick Start Guide

Testing:

A. Plug the wire into the correct Test Port, Ethernet to RJ45

B. Plug the opposite end into the Main Remote

C. Press Network Button

D. The LCD Display reports wire condition, Pass/Fail

E. To turn off, press O/ID Button

Toning:

A. With the unit turned OFF, hold down the LENGTH/TONE button until

LCD illuminates

B. To select a tone cadence, press the LENGTH/TONE button repeatedly to step

through the four cadence options: HI, LO, Hi-Lo1, and Hi-Lo1. Stop when you

reach the option you want. The option you select determines the cadence sent

from the main tester, through the cable, and picked up by the tone tracer probe.

C. Press the appropriate cable type button (voice, video, or data) to select a

cable for the tone signal

* Note: Tone is detected by a tone tracer probe

Length Measurement:

A. Make sure the CM450 is turned OFF.

B. Insert the cable plug into the corresponding receiver on the main tester (RJ-11

jack for voice cable, RJ-45 jack for data cables, F-Connector for video cables).

C. Press the LENGTH/TONE button to enter Length Mode.

D. Press the cable type button corresponding to the connector in use.

Features:

Testing: CM450 shows Opens, Shorts, Miswires, Split Pairs, PASS and

FAIL results quickly.

Toning: CM450’s built-in tone generator is a ﬂ exible and function-packed

tone generator. Its conﬁ gurable signal can be generated to ﬁ nd and ﬁ x the

position on any type of cable - either exposed or hidden, in ceilings or

behind walls.

Length: CM450 determines the length (in feet or meters) of an entire cable and/

or individual wire pairs within the cable.

Option: CM450 is supported by (1-19) wiremapping ID locators (Network/Coax)

and (1-8) testing/ID remotes (Network/Telephone).

Button Function

1. LCD Display

2. Voice Mode

3. Video Mode

4. Data Mode

5. Length/Tone Mode

6. On/Off and ID Mode

7. Main Unit Remote

(RJ11, RJ45)

CableMaster

CM450

Quick Start Guide

Button Function

1 LCD Display 5 Length/Tone Mode

2 Voice Mode 6 On/Off and ID Mode

3 Video Mode 7 Main Unit Remote

4 Data Mode (RJ11/RJ12, RJ45)

English

A. Plug the wire into the correct Test Port, e.g. Ethernet to RJ45

B. Plug the opposite end into the Main Remote

C. Press Network Button

D. The LCD Display reports wire condition, Pass/Fail

E. To turn off, press O/ID Button

Toning:

A. With the unit turned OFF, hold down the LENGTH/TONE button until

LCD illuminates

B. To select a tone cadence, press the LENGTH/TONE button repeatedly to

step through the four cadence options: HI, LO, Hi-Lo1, and Hi-Lo 2. Stop

when you reach the option you want. The option you select determines the

cadence sent from the main tester, through the cable, and picked up by the

tone tracer probe*.

C. Press the appropriate cable type button (voice, video or data) to select a

cable for the tone signal

* Note: Tone is detected by a tone tracer probe (optional)

Length Measurement:

A. Make sure the CM450 is turned OFF.

B. Insert the cable plug into the corresponding receiver on the main tester

(RJ-11/RJ12) jack for voice cable, RJ-45 jack for data cables, F-Connector

for video cables).

C. Press the LENGTH/TONE button to enter Length Mode.

D. Press the cable type button corresponding to the connector in use

Features:

Testing: CM450 shows Opens, Shorts, Miswires, Split Pairs, PASS and

FAIL results quickly.

Toning: CM450`s built- in tone generator is a ﬂexible and function- packed

Tone generator. Its conﬁgurable signal can be generated to ﬁnd and ﬁx the

position on any type of cable – either exposed or hidden, in ceilings or

behind walls.

Length: CM450 determines the length (in feet or meters) of an entire cable and/

or individual wire pairs within the cable.

Option: CM450 is supported by (1-19) wiremapping ID locators (Network/Coax)

and (1-8) testing/ID remotes (Network/Telephone).

English

Produktspecifikationer

Varumärke:	Psiber
Kategori:	Mätinstrument
Modell:	CM450 CableMaster
Färg på produkten:	Zwart
Vikt:	1810 g
Diafragma (FF):	2 - 2.6
Kastförhållande:	4.47:1 - 6.58:1
Kompatibilitet:	Sony PK-F500LA1, VPL-FX500L
Mått (B x D x H):	100 x 222 x 100 mm
Projektionsformat:	40 - 300