Pyle Pro PDWM2135 Bruksanvisning

Läs nedan 📖 manual på svenska för Pyle Pro PDWM2135 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
VHF Fixed Frequency Wireless Microphone System
PDWM2135 • PDWM2140 • PDWM2145
PDWM2135 PDWM2140
PDWM2145
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
Plug the receiving unit into your electrical wall outlet.
Turn the receiver by using the switch located at the front of the unit.ON ON/OFF
There is a switch located on each of the two microphones that turns each
microphone & mutes them individually.ON/OFF
2
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range & Low Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Handheld Microphones:
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Power: AC 120V, 60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
Receiver Base
(2) Handheld Microphones

Produktspecifikationer

Varumärke: Pyle Pro
Kategori: Inte kategoriserad
Modell: PDWM2135

Behöver du hjälp?

Om du behöver hjälp med Pyle Pro PDWM2135 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Pyle Pro Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer