QTX VL1 Bruksanvisning

Läs nedan 📖 manual på svenska för QTX VL1 (6 sidor) i kategorin mikrofon. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
V-SERIES
VHF Wireless Systems
User Manual
Version 3.3
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
V-Series VHF Wireless User Manual
Introduction
Thank you for choosing the QTX Soun -series wireless system. This professional wireless set provides a high quality d VHF
microphone with VHF radio system for freedom of movement without loss of audio quality. Please read this manual
before using this equipment in order to avoid damage through incorrect operation and to get the best performance from
your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…
VHF wireless receiver
Mains power adapter
6.3mm mono jack lead
9V battery, PP3 (2 pieces for VH2, VN2 or VHN2)
Microphone / transmitter(s) see table below
Model
Stock code
Microphone 1
VH1
171.804 UK
Handheld transmitter
VH2
171.816 / 171.817 UK UK
Handheld transm ter it
VN1
171.836 / 171.837 UK UK
Neckband mic. + beltpack
VN2
171.818 / 171.819 UK UK
Neckband mic. + beltpack
VHN2
171.810 / 171.811 UK UK
Handheld transmitter
VL1
171.834 / 171.835UK UK
Lavalier mic. + beltpack
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified
personnel before further use.
Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified servi personnel. ce
Safety
Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the
adapter.
Avoid ingress of water or particles into the transmitter(s) or receiver
Use alkaline or NiMH batteries i the transmitter(s) and remove if unused for long periods. n
Observe the correct polarity when replacing batteries
Placement
Keep all components out of direct sunlight and away from heat sources.
Do not place heavy objects on top of the receiver or tr smitter(s) an
If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.
Keep the transmitter(s) and receiver away from damp or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.
Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes
To avoid damage, do not use solvents to clean the components
V-Series VHF Wireless User Manual
Handheld Transmitter Beltpack Transmitter
Receiver Rear Panel
Receiver Front Panel
1. Windshield
2. Slide switch and LED
3. Battery compartment cover
1. Antennas
2. DC power input
3. 6.3mm jack output
4. XLR output
1. Power /OFF switch ON
2. Channel A volume control
3. Channel A indicator LED
4. Power indicator LED
5. Channel B indicator LED
6. Channel B volume control
1. Volume control
2. Slide switch and LED
3. 3.5mm mic hone input jack rop

Produktspecifikationer

Varumärke: QTX
Kategori: mikrofon
Modell: VL1

Behöver du hjälp?

Om du behöver hjälp med QTX VL1 ställ en fråga nedan och andra användare kommer att svara dig




mikrofon QTX Manualer

QTX

QTX J-MIC Bruksanvisning

20 September 2024
QTX

QTX VL1 Bruksanvisning

4 Augusti 2024
QTX

QTX VH1 Bruksanvisning

2 Augusti 2024

mikrofon Manualer

Nyaste mikrofon Manualer