Quadralite Stroboss 60 II Bruksanvisning

Quadralite Flash Stroboss 60 II

Läs nedan 📖 manual på svenska för Quadralite Stroboss 60 II (18 sidor) i kategorin Flash. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/18

Foreword

Thank You for purchasing this product.

This Stroboss 60 II camera flash applies to camera compatible with TTL autoflash. With this TTL

compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure

even in complex light-changing environments. This camera flash features:

•Approx. GN60 (ISO 100,@200mm), 81 steps from 1/1 to 1/256.

•Fully support TTL camera flash. Workable as Transmitter or Receiver unit in a wireless

flash group.

•Use dot-matrix LCD panel to make clear and convenient operations.

•With built-in 2.4GHz wireless remote system to support transmitting and receiving.

•Provided multiple functions, include HSS (up to 1/8000s), FEC, etc.

•Stable consistency and color temperature with good even lighting.

•Support with firmware upgrade.

Warning

•Always keep this product dry. Do not use in rain or in damp conditions.

•Do not disassemble. Should repairs become necessary, this product must be sent to an

authorized maintenance center.

•Keep out of reach of children.

Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise,

electric shock may occur if you touch the electonic parts inside it.

•Do not fire the flash directly into the eyes (especially those of babies) within short

distances. Otherwise cisual impairment may occur.

•Do not use the flash unit in the presence of flammable gases, chemicals and other

similar materials. In certain circumstance, these materials may be sensitive to the strong

light emitting from this flash unit and fire or electromagnetic interference may result.

•Do not leave or store the flash unit if the ambient temperature reads over 50°C.

Otherwise the electronic parts may be damaged.

•Turn off the flash unit immediately in the event of malfunction.

Conventions used in this Manual

•This manual is based on the assumption that both the camera and camera flash's power

switches are powered on.

•The automatic light measurement system is marked in this manual with the , which isTTL

the correct abbreviation for the Sony brand, for other brands these are (Nikon), i-TTL

etc.

•The pictures show an example lamp for the Canon system.

•The following alert symbols are used in this manual:

The Caution symbol indicates a warning to prevent shooting problem.

The Note symbol gives supplemental information.

-2-

CONTENTS

2 Foreword

2 Warning

4 Name of Parts

4 - Body

4 - Control Panel

5 - LCD Panel

5 - LCD Panel in Three Modes

6 What's in the Box of Stroboss 60 II?

6Separately Sold Accessories

6 Loading and Unloading the Battery

6 Attaching to a Camera

7 Power Management

7 Flash Mode – TTL Autoflash

7- FEC (Flash Exposure Compensation)

7 - High-Speed Sync

8 - Second-Curtain Sync

8 M: Manual Flash

9 Multi: Stroboscopic Flash

9 Wireless Flash Shooting: Radio (2.4G) Transmission

10 - Wireless Settings

10 - Transmitter Unit's Flash OFF

11 - Setting the Comunication Channel

11 - Wireless ID Settings

11 - Scan the Spare Channel

12 - TTL: Fully Automatic Wireless Flash Shooting

13 - M: Wireless Flash Shooting with Manual Flash

14 - Multi: Wireless Flash Shooting with Manual Flash

14 Other Applications

14 Sync Triggering

14 Auto Focus Assist Beam

14 Bounce Flash

15 ZOOM: Setting the Flash Coverage

15 Low Battery Warning

16 C.Fn: Setting Custom Functions

16 Protection Function

17 Technical Data

18 Troubleshooting

18 Firmware Upgrade

18 Compatible Camera Models

18 Maintenance

-3-

Name of Parts

Body

01 Flash Head 07. Battery Cover

02 Built-in Wide Panel 08. Hotshoe

03. Wireless Sensor 09. LCD Panel

04. Focus Assist Beam 10. Hotshoe Fixing Buckle

05. Sync Cord Jack 11. External Charging Port

06. Type-C USB Port

Control Panel

11. <MENU> Flash Menu Button 18. <MODE> Mode Selection Button

12. < > Wireless Selection Button 19. < > Lock Setting

13. Select Dial 20. <+/-> Power Output

14. Set Button 21. Function Button 1

15. ON/OFF Power Switch 22. Function Button 2

16.< > Test Button Flash Ready Indicator 23. Function Button 3

17. <ZOOM> Focus Length Setting 24. Function Button 4

-4-

LCD Panel

(1) TTL Autoflash

•The display will only show the settings currently applied.

•The functions displayed above function buttons 1 to 4, such as and

<M/A/B/C>, change according to setting's status.

•The LCD panel will lighten on when buttons and dials are operated.

(2)M: Manual Flash

(3) Multi Flash

(4) Radio Transmission Shooting

Transmitter Unit (TX)

Receiver Unit (RX)

LCD Panel in Three Modes

Attached to the Camera

-5-

2.4G Radio Transmission: As a Transmitter Unit

2.4G Radio Transmission: As a Receiver Unit

What's in the Box of Stroboss 60 II?

1. Flash Unit

2. Mini Stand

3. Protection Case

4. Instruction Manual

Separately Sold Accessiories

This product can be used in combination with the following accessories sold separately, so as to

achieve best photography effects:

Quadralite Navigator XC, Quadralite Navigator, Quadralite S-holder, etc

Loading and Unloading the Battery

1. To unload the battery, hold down the battery and press

compartment and push the battery downwardly to take it out.

2. Put 4 batteries in with the correct polarity after opening the

battery compartment, then close and push it to the top.

Attaching to a Camera

1. Attach the Camera Flash.

Rotate the hotshoe fixing buckle to the left and insert the

camera flash into the camera's hotshoe.

2. Secure the Camera Flash.

Rotate the hotshoe fixing buckle to the right until it locks up.

3. Detach the Camera Flash.

Press the button and rotate the hotshoe fixing buckle to the

left until it is loosened.

-6-

Power Management

Use ON/OFF Power Switch to power the flash unit on or off. Turn off if it will not be used for an

extended period of time. Setting as a transmitter flash, it will turn the power off automatically after a

certain period (approx. 90 seconds) of idle use. Pressing the camera shutter halfway or pressing any

flash button will wake up the flash unit. Setting as a receiver flash, it will enter sleep mode after a

certain period (adjustable , 60 minutes by default) of idle use. Pressing any flash button will wake it up.

Disabling Auto Power Off function is recommended when the flash is used off camera

(C.Fn-STBY)

Receiver Auto Power Off Timer is set to 60 minutes by default. Another option "30

minutes" is available (C.Fn-RX STBY).

FLASH MODE-TTL Autoflash

This flash has three flash modes: Manual ( ), and Multi (Stroboscopic). In mode, the TTL, M TTL

camera and the flash will work together to calculate the correct exposure for the subject and the

background. In this mode, multiple TTL functions are available: FEC, HSS, second curtain sync,

modeling flash, control with the camera's menu screen.

Press < Mode Selection Button and three flash modes will display on the LCD panel one by MODE>

one with each pressing.

TTL Mode

Press < Mode Selection Button to enterTTL mode. The LCD panel will display.MODE>

•Press the camera release button halfway to focus. The aperture and effective flash range

will be displayed in the viewfinder.

•When the shutter button is fully pressed, the flash will fire a pre-flash that the camera will

use to calculate exposure and flash output the instant before the photo is taken.

FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3

rd stops. It is useful in situations where

minor adjusting of the TTL system is needed based on the environment.

1. Press the (+/-> button. The icon and flash exposure

compensation amount will be highligted on the LCD panel.

2. Set the flash exposure compensation amount.

Turn the Select Dial to set the amount.

"0.3" means 1/3 step, "0.7" means 2/3 step.

To cancel the flash exposure compensation, set the

amount to "+0".

3. Press Set Button again to confirm the setting.

High-Speed Sync

High Speed Sync (FP flash) enables the the flash to synchronize with all camera shutter speeds. This

is convenient when you want to use aperture priority fo fill-flash portraits.

1. Press Function Button 2 < > so that < is

displayed.

2. Press MENU or Fn button on SONY camera

to enter Flash Mode and choose Fill-flash, then

set the camera shutter.

-7-

Produktspecifikationer

Varumärke:	Quadralite
Kategori:	Flash
Modell:	Stroboss 60 II

Behöver du hjälp?

Om du behöver hjälp med Quadralite Stroboss 60 II ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Flash Quadralite Manualer

Quadralite Stroboss 60 II Bruksanvisning

23 September 2024

Flash Manualer

Nyaste Flash Manualer

Canon Speedlight 430EX Bruksanvisning

22 Oktober 2024

Nikon SB-29 Bruksanvisning

22 Oktober 2024

GVM RGB-10S Bruksanvisning

8 Oktober 2024

Godox AD200Pro II Bruksanvisning

6 Oktober 2024

Olympus FL‑900R Bruksanvisning

5 Oktober 2024

Nikon SB-17 Bruksanvisning

2 Oktober 2024

Vello OCS-FAC Bruksanvisning

1 Oktober 2024

Goodram M1AA Bruksanvisning

1 Oktober 2024

Godox Witstro AD400 Pro Bruksanvisning

29 September 2024

Godox V1F Bruksanvisning

29 September 2024