Quantum VS2124 Bruksanvisning

Läs nedan 📖 manual på svenska för Quantum VS2124 (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Hardware Overview
For front and rear views of the system, descriptions of the components, and explanations
of what the various LEDs indicate, refer to Operate > Hardware Overview.
VS2124 QUICK START
The Quantum VS2124 is an efficient, flexible platform designed for video surveillance
applications. It enables you to efficiently record and store surveillance footage and run an entire
security infrastructure on a single cloud like platform. For complete documentation, refer to the -
VS2124 Documentation Center (www.quantum.com/VS2124docs).
Activate your warranty and register your product with Quantum: www.quantum.com/startup
Installing the VS2124
Step 2 Prepare for the installation.
Page 1
Front
Bezel Removed and Internal Drives Shown
All Drives Ship Installed
Rear
Step 1 Choose a location that meets the requirements.
A summary of the steps is below. For details, refer to Install > VS2124 Installation.
Step 3 Unpack the VS2124.
Step 4 Install the VS2124 system in the rack.
Step 5 Install the cable management arm.
Step 6 Connect the power cords and power on.
Control Panel
Power Button
Reset Button
Status LEDs
Safety Information: See Resources > VS2124 Safety Information
Location on Front of Chassis
Operating and Maintaining the VS2124
6-68737-01 Rev E ©2019 Quantum Corporation. All rights reserved.
Page 2
*6 01*- -68737
Display IP Addresses
For instructions on how to use the VMS-Info icon to display your system’s
existing IP address settings, refer to Operate > Display IP Addresses.
Locate the System Serial Number
For details on locating the system serial number and chassis part number, refer to Operate > Locate
the System Serial Number. You will need this if you contact Quantum Technical Support or order a
replacement part.
Generate Data Collect Logs
For details on using the VMS-Collect icon or the VMS-Settings Menu to create a zip file that contains
the diagnostic logs for all of the system components, refer to Operate > Generate Data Collect Logs.
Step 7 Perform the initial configuration.
Step 8 Identify Network Connections and Configure
CameraNet Interfaces.
Configuring the VS2124
Step 9 Install the video surveillance software.
Location on Rear of Chassis
Video Surveillance Console

Produktspecifikationer

Varumärke: Quantum
Kategori: övervakningskamera
Modell: VS2124

Behöver du hjälp?

Om du behöver hjälp med Quantum VS2124 ställ en fråga nedan och andra användare kommer att svara dig




övervakningskamera Quantum Manualer

Quantum

Quantum VS2124 Bruksanvisning

12 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer