Really Right Stuff BH-30 Bruksanvisning
Really Right Stuff
Stativ
BH-30
Läs nedan 📖 manual på svenska för Really Right Stuff BH-30 (2 sidor) i kategorin Stativ. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
OPERATION
Attach the BH-30 to Tripod
1. Tighten the Pan Lock Knob to lock the Panning Base.
NOTE: Suicient lockup of both the pan and the ball can
be achieved with light to medium torque. Overcranking
the pan lock knob will result in unwanted drag on the ball.
2. Screw the ballhead onto the ”-16 threaded stud on the top of the
tripod (stud should not protrude more than ” above platform or
5-6 threads). Tighten the ballhead onto the tripod snugly, but do not
over-torque or it will be diicult to remove.
Set Up Your Tripod
Set up your tripod to match the required camera position.
Orient the Ballhead
Loosen the Pan Lock Knob and rotate the body of the BH-30 ballhead so
that you may operate the Main Lock Knob with your le hand while your
right hand is free to operate the camera controls. Tighten Pan Lock Knob
to secure the orientation.
1
2
Right Hand
Left Hand
Orient the Quick-Release Clamp
1.
Camera Body Plates & L-Plates:
For quick-release plates with le/right dovetail orientation, orient
your clamp as illustrated:
2.
Lens Plates & Rails:
For quick-release plates with fore/a or bidirectional dovetail
orientation, orient your clamp as illustrated:
As you adopt a procedure that works for you, it’s best to
practice that working mode consistently until it becomes
second nature. This will save you time in the field and help
avoid costly mistakes. Seasoned pros are able to setup
and shoot literally within seconds.
Lever Release Screw-Knob
Lever Release Screw-Knob
Using the Drop Notch
1.
Loosen the Pan Lock Knob and rotate the body 90º counter clockwise.
Retighten Pan Lock Knob.
2. Fully seat camera into the drop notch.
Using the Main Lock T-Lever
® , ™, © 1990-2017 Really Right Stuff, LLC. All rights reserved.
The Main Lock T-Lever is longer on one
end. This design makes it easy to turn
the lever and apply enough pressure
to solidly lock the head. In some
instances, though, the long end of the
lever may hit the tripod platform or
even the clamp. That’s why we made
the main lock T-Lever spring loaded and
re-positionable:
1. Pull the T-Lever out.
2.
Rotate T-Lever to a new position.
The T-Lever actually drives an
internal six-sided hex nut, so
there are 6 possible positions
for the T-Lever.
3.
Allow T-Lever to snap into place.
MAINTENANCE
General Care
The BH-30 is finished with a protective anodize plating that protects the
aluminum from corrosion and mild abrasion. It will not protect it from
scraping against or dropping on rocks/concrete/etc.
The BH-30 comes packed in our protective LB-40 Cordura Pouch (pouch
not included when BH-30 is purchased without clamp or platform). Keep
the BH-30 in this pouch whenever practical. When transporting your
tripod, cover ballhead with the pouch and tighten the drawstring around
the bottom to keep it in place.
Cleaning
Take whatever precautions you can to prevent your BH-30 from getting
fouled in mud, dirt, or sand. A good habit is to keep a plastic bag with
your camera gear to quickly cover your camera and ballhead if you get
caught in a rain/sandstorm. If the BH-30 is fouled, dry dust and dirt can
be blown o and/or wiped o with a so cloth. Mud or salt water should
be lightly rinsed o with fresh water and then thoroughly dried. Do NOT
submerge the ballhead when washing and do not direct a high-pressure
stream of water at the ballhead.
All the knobs are captive, meaning they cannot come o without
damaging them so do not attempt to remove the knobs. If fine sand/
grit fouls the knob, simply run a gentle stream of water around the knob
while rotating it one-half turn back and forth.
Break-In
The ballhead is tuned to maximize holding capacity and deliver super-
fast lockup. If you like to work with a fully loose ball with no pre-set
tension, the ballhead is ideal for you “out of the box”. However, those who
like to operate the ballhead with a given amount of drag may find that
articulating a pre-tensioned ballhead is not as silky smooth as desired.
Keep in mind, aer using the head for a period of time there will be
some noticeable soening of the action. Customers have been known
to lubricate their ballhead for increased fluidity of motion, however we
do not recommend this.
Lubrication
The BH-30 is lubricated at the factory and parts that require lubrication
are sealed. NO LUBRICATION IS REQUIRED BY THE USER. Especially DO
NOT LUBRICATE THE BALL as this will decrease the lock-up capacity
and will attract dirt/dust. Just keep the ball free from contamination to
maintain smooth action.
Thankyou
for choosing a Really Right Stu BH-30
Ballhead. It is the culmination of years of
development based on first-hand experience and abundant input from
seasoned professionals. Please review this manual to see how you can
get the most from your BH-30.
SPECIFICATIONS: BH-30 LR
Load Capacity 15 pounds (6.8kg) ................................................................
Ball Articulation ±45º, 90º notch .................................................................
Tension Adjustment via Main Lock T-lever .................................................
Panning Base 2.5º increments, zero to 360º ...............................................
Height 2.9” (75mm) .....................................................................................
Tripod Mount Stainless Steel ”-16 ...........................................................
Base Diameter 1.6” (41mm) ........................................................................
Ball Diameter ..........................................................................1.2” (30mm)
Weight w/ B2-40 LR Clamp 11.4 ounces (324g) ..........................................
Optional Platform and Stud 1½” platform with ¼” stud ...........................
Main Lock T-Lever Spring loaded & repositionable ....................................
Clamp Options see our website for all clamp options ...............................
KEY FEATURES
1.
Pan Lock Knob — Our exclusive drum and band panning brake
locks with an ergonomic scalloped knob. Conveniently shaped with
detents, you can easily apply enough force to unscrew the ballhead
by hand without the panning base slipping.
2. 30mm Ball — The 30mm ball is hollow for reduced weight, and its
shape and finish allow for smooth and precise movement.
3. Quick-release Clamps — Really Right Stu quick-release clamps
feature the option of screw-knob or lever-release styles. We oer
many sizes, from mini clamps to extra long clamps. Though any
of our quick-release clamps can be installed onto the ballhead, the
B2-40 LR and B2-mAS clamps are the best choices for the BH-30.
4. Main Lock T-Lever — Our ergonomic T-lever is designed for easy
locking of the ball. It can be pulled out and repositioned for optimal
ergonomics.
5. Drop Notch — Used in conjunction with the panning function, the
drop notch is used to position your camera at angles greater than
45º. At full drop, the camera is positioned 90º from top dead center
of the ballhead, allowing for portrait orientation and/or gimbal style
movement. Protection from accidental fallout is ensured if you use
an RRS quick-release plate with safety stop.
6. Body — The CNC machined body serves as both the structure and
the clamping mechanism of the ballhead. This is furnished by a
unique split body design, which is robust, lightweight and sealed to
prevent dust contamination. Finished with satin black anodizing,
it can withstand abrasion and corrosion while looking beautiful.
7.
Engraved Pan Base — The pan base features a mark every 2.5º
and is labeled from 0º to 360º. Located on the main body just below
the drop notch is an index mark for tracking progressive panning,
used in multi-shot panoramic photography.
BH-30 LR
Pictured
4
7
3
1
2
6
5
GUARANTEE
All Really Right Stu brand products are guaranteed to
the original purchaser to be free of defects in materials or
workmanship for five (5) years from the date of purchase.
Products will be repaired or replaced at our option.
BH-30 BALLHEAD
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
Produktspecifikationer
| Varumärke: | Really Right Stuff |
| Kategori: | Stativ |
| Modell: | BH-30 |
Behöver du hjälp?
Om du behöver hjälp med Really Right Stuff BH-30 ställ en fråga nedan och andra användare kommer att svara dig
Stativ Really Right Stuff Manualer
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
Stativ Manualer
- Stativ Sony
- Stativ Nikon
- Stativ Silvercrest
- Stativ Livoo
- Stativ Asus
- Stativ Kodak
- Stativ Trust
- Stativ Carson
- Stativ Easypix
- Stativ Hama
- Stativ AVerMedia
- Stativ Celestron
- Stativ DJI
- Stativ Vello
- Stativ Rollei
- Stativ Godox
- Stativ Magnus
- Stativ Barska
- Stativ Zhiyun
- Stativ Miller
- Stativ Benro
- Stativ GVM
- Stativ Vortex
- Stativ Sachtler
- Stativ Sevenoak
- Stativ Laserliner
- Stativ Sunpak
- Stativ Celly
- Stativ Eurolite
- Stativ Gitzo
- Stativ Proaim
- Stativ Revo
- Stativ Konig & Meyer
- Stativ Manfrotto
- Stativ Velbon
- Stativ ARRI
- Stativ Levenhuk
- Stativ JOBY
- Stativ Oben
- Stativ Dorr
- Stativ Glide Gear
- Stativ Winegard
- Stativ Libec
- Stativ Kogan
- Stativ MOZA
- Stativ Flycam
- Stativ Gravity
- Stativ Sirui
- Stativ Vinten
- Stativ Neewer
- Stativ ProMediaGear
- Stativ Ravelli
- Stativ Fidlock
- Stativ Mantona
- Stativ Olloclip
- Stativ Cullmann
- Stativ Vanguard
- Stativ IFootage
- Stativ SmallRig
- Stativ FeiYu-Tech
- Stativ FeiyuTech
- Stativ Sky-Watcher
- Stativ Hohem
- Stativ MOVE'N SEE
- Stativ On Air
- Stativ Kaiser Fototechnik
- Stativ Slidekamera
- Stativ IOptron
- Stativ FLOWCINE
- Stativ SteadiCam
- Stativ Fat Gecko
- Stativ 3 Legged Thing
- Stativ FLM
- Stativ Peak Design
- Stativ Easyrig
- Stativ Robus
- Stativ Studio Assets
- Stativ Square Jellyfish
- Stativ Stalco
- Stativ Tiltall
- Stativ E-Image
- Stativ Cam Caddie
- Stativ MotoCrane
- Stativ Cartoni
- Stativ HPRC
Nyaste Stativ Manualer
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024