Redback Technologies Smart Hybrid Inverter SH5000 Bruksanvisning

Redback Technologies Inte kategoriserad Smart Hybrid Inverter SH5000

Läs nedan 📖 manual på svenska för Redback Technologies Smart Hybrid Inverter SH5000 (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/7
Smart Hybrid Inverter SH5000
Intelligent system
Maximise
self-consumption
through built in relays.
Uninterrupted
power supply
Ensuring that your
lights stay on, powered
by your batteries.
Prewired BoS
For fast and low cost
installation, including
approved DC isolator.
Monitoring
Generation and
consumption
monitoring via the cloud.
Energy for the future
Redback Technologies has a vision to enable every household and business to be entirely powered by
low cost renewable energy all day, every day. The Redback Smart Hybrid System is the platform which
facilitates all energy users to participate in the network of the future through clean, efficient and smart
energy management. Redback Technologies, helping the world switch on renewable energy today for a
cleaner tomorrow.
For more information visit redbacktech.com
IP65 rated
Can be installed
inside or outside.
516mm
832mm
2 0mm8
DimensionsEnergy flow
Solar array SH5000
Number of solar array inputs 2 (individual maximum power point tracking)
Maximum DC open circuit voltage 580V DC
MPPT operating range 125 – 550V
Starting voltage 125V DC
Maximum DC input current
(for each solar array input) 11A DC
Solar array switch rating 1000V DC
Input connectors H4
Residual current and insulation
monitoring Integrated
Utility interface
Nominal AC voltage/frequency 230V AC, 50Hz, single phase
Continuous AC power rating 5000W AC
Maximum AC power to utility grid 5000W AC (derated over 45C ambient)
Maximum AC current to utility grid 21.7A AC
Maximum AC current from utility
grid 40A AC
Nominal AC output range 180 to 270V AC, 45 to 55Hz (adjustable)
Current THD Less than 1.5%
Power factor 0.8 leading to 0.8 lagging (adjustable)
AC overvoltage category Category III
Anti-islanding and AC overcurrent
protection Integrated
Inverter topology Transformerless (with HF transformer isolation
for battery)
Battery interface
Nominal DC voltage 48V DC
Battery compatibility Refer to Redback Battery Enclosure datasheet
Maximum charging and
discharge power (from battery) 4600W DC
Maximum charging current 85A DC
Maximum discharging current 100A DC
Battery charging method BMS controlled
Typical charging voltage
(bulk/absorption phase) 57.0V DC
Battery disconnect Integrated 4 pole DC breaker 63A DC per pole
Control interfaces
Signal relay outputs 4
DRM modes 0-8
Remote firmware updates Supported
Relays 2 x 10A Omron
Grid regulation compliance: AS4777.2, AS4777.3 Safety certification: AS3100, IEC62109-1,IEC62109-2, IEC62040-1
Specifications
Back up loads output
Nominal AC voltage/frequency 230V AC, 50Hz, single phase
Continuous AC power rating 4600W AC (derate over 45°C ambient)
Maximum AC power rating 6900W AC (10 seconds maximum)
Maximum AC current 21.7A continuous, 30A for 10 seconds
maximum
Voltage THD Less than 4.5% (with linear loads)
Back-up loads AC disconnect 25A MCB
Manual back-up load AC bypass
switch Integrated
Efficiency
Maximum efficiency (to utility grid) 97.6%
European averaged efficiency 97.0%
Maximum power point tracking
efficiency 99.9%
Efficiency
(powering loads from battery) 90% typical
Standby losses Less than 8W AC
General data
Dimensions (W x H x D) 516 mm x 832 mm x 290 mm
Mounting and weight Inverter 32kg, BoS 12kg, total 44kg
Ambient temperature range -25 to 60°C derate above 45°C
Relative humidity 0 to 95%
DC overcurrent category Category II
Moisture location category 4K4H
Environmental protection rating IP65
Cooling Natural convection
Noise emissions Less than 25dB
Warranty 5 years
User Interface
Front panel display Multi-coloured LED indicators
Communications Integrated WiFi + ethernet for smartphone and
web monitoring
Remote access Web and android/iOS application
Power/energy monitoring Includes 3 x utility grade (class 1) meters
Utility gridPV arrays
AC loads
Battery
Back up loads
Smart Hybrid Battery Enclosure BE13200
Prewired
For safe and fast
installation.
IP54 rated
Can be installed
inside or outside.
Front panels
Powder coated,
durable and die cast
aluminium covers.
Fan
Dual variable speed
fans controlled
by charge/
discharge rate.
Energy for the future
Redback Technologies has a vision to enable every household and business to be entirely powered by
low cost renewable energy all day, every day. The Redback Smart Hybrid System is the platform which
facilitates all energy users to participate in the network of the future through clean, efficient and smart
energy management. Redback Technologies, helping the world switch on renewable energy today for a
cleaner tomorrow.
Capacity
Up to kWh.11.8
For more information visit redbacktech.com.

Produktspecifikationer

Varumärke: Redback Technologies
Kategori: Inte kategoriserad
Modell: Smart Hybrid Inverter SH5000

Behöver du hjälp?

Om du behöver hjälp med Redback Technologies Smart Hybrid Inverter SH5000 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Redback Technologies Manualer

Redback Technologies

Redback Technologies Smart Hybrid Inverter SH5000 Bruksanvisning

25 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024