Robinhood SB560B Bruksanvisning

Robinhood Inte kategoriserad SB560B

Läs nedan 📖 manual på svenska för Robinhood SB560B (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/5
1
Description: ROBINHOOD SLASHBACK PREM LDRY
Model Number: SB560B
Model pictured: SB560B
SB560B
Issue: 1
All dimensions in mm
Model may vary slightly from images pictured
2
Overview
Contents of packaging:
1 x Robinhood Splash Back
1 x Installation kit (incl screws fixing washers washers) , ,
1 x Splash back handle
1 Chrome baskets x
Pre-installation
Important:
o Please read the entire instructions before installing the Splash back.
Regulation compliance
Comply with current Drainage and Plumbing Regulations as required by your local authority. Sanitary
plumbing shall only be carried out by a Registered Plumber. All plumbing work must be done in accordance
with local and national building and plumbing codes as applicable. All electrical work must be done in
accordance with local and national electrical codes as applicable. In some instances this product may need to
be earthed.
Determine site
Determine the most suitable position for the splash back. Mark the position on the wall as reference.
Important safety information
o This Robinhood Splash back is not intended for use by young children or infirm persons without
supervision.
o Young children should be supervised to ensure that they do not play with the Robinhood Supertub.
o Use abrasive household cleaner.
Cleaning and maintenance
Powder coated surfaces must not be cleaned with abrasive or chemical cleaners. To keep the Robinhood Supertub
looking its best, wipe regularly with a damp soft cloth. A mild soap and water solution may be used to remove
stubborn dirt. Under no circumstances should harsh detergents (including chemical cleaners) such as bleach,
scourers or any abrasive cleaner be used as these products may irreparably damage the surfaces of the
Robinhood Supertub.
NB. Their use will render the warranty void
3
Installing the Splash back
1. Fix handle using fixing screws and washers supplied.
2. Fix mounting screws and cup washers to the wall using the dimensions given below. Mounting to a stud
is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable wall fixings
will be required (not supplied).
A Distance from the bench top to the lower fixing screw
107mm flush fit between the bottom surface of the splash back and the bench top
110mm allows a 3mm gap between the splash back and bench top if is required sealing
3. Hang splash back from the cup washers.
4. Seal the splash back to the wall using suitable approved sealant. (Check with your local council for
building regulations).

Produktspecifikationer

Varumärke: Robinhood
Kategori: Inte kategoriserad
Modell: SB560B

Behöver du hjälp?

Om du behöver hjälp med Robinhood SB560B ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Robinhood Manualer

Robinhood

Robinhood SB560B Bruksanvisning

23 September 2024
Robinhood

Robinhood ST1200 Bruksanvisning

6 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024