Roland VC-1-DMX Bruksanvisning

Roland Lättnad VC-1-DMX

Läs nedan 📖 manual på svenska för Roland VC-1-DMX (6 sidor) i kategorin Lättnad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
Owner’s Manual
© 2022 Roland Corporation
Before using the unit, ensure that its system program is at the most recent version. For information on available upgrades for the system program,
see the Roland website (https://proav.roland.com/).
DMX conguration software
You can congure the DMX channels by
connecting this unit to a computer that’s running
DMX conguration software. For details, refer to
“Using VC-1-DMX conguration software” (Web).
1. Visit the following website on your computer
or other device.
https://proav.roland.com/manuals/
2. Choose “VC-1-DMX” as the product name.
“Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual (p. 6)). After reading, keep the document(s) where it will be available for immediate reference.
VIDEO LIGHTING CONVERTER
VC-1-DMX
Checking the Included Items
Check that all of the included items are present.
If any of the included items are missing, contact your
dealer.
ÂVC-1-DMX unit
ÂAC adaptor
ÂPlug holder
ÂRubber foot x 4
ÂOwner’s Manual
ÂLeaet “USING THE UNIT
SAFELY”
2
ÃAttaching the plug holder
Use the plug holder to stabilize the adaptor and
prevent the plug from accidentally coming loose.
To attach the plug holder, rst remove the screw just
above the DC IN jack, align the plug holder as shown
in the illustration below and then use the screw you
just removed to ax the plug holder onto the unit.
Panel Descriptions
Front Panel
1 POWER indicator
Once you connect the AC adaptor, this unit powers
up and the POWER indicator lights up red.
2 USB port
You can congure the DMX channels by connecting this
to a computer on which dedicated software is installed.
The dedicated software for use with this unit can be
downloaded from the Roland website.
https://roland.cm/VC-1-DMX/
3 SETTING switches
Use a thin pen tip or other such tool to congure
the operation settings. For the values, refer to
“Conguring the Operation Settings” (p. 4).
4 HDMI IN connector
Connect an HDMI source device such as a computer
or BD player for video input. Video signals up to a
resolution of full HD (1080/60p) can be input. HDCP-
protected video can also be input.
5 HDMI THRU connector
Outputs the video signal input from the HDMI IN
connector as-is. Connect a device that receives HDMI
video here, such as a TV monitor.
ÃAttaching the rubber feet
This unit can be placed on a table or other surface,
and you can use screws or bands to ax it to a wall
or other at place for use.
When placing the unit on a table, attach the included
rubber feet in the places shown in the illustration
before use.
* When turning the unit over, handle the unit
carefully; do not drop it.
Rear Panel
1 DC IN jack
Connect the included AC adaptor here. Use only
the AC adaptor that came with this unit.
2 AUDIO IN/OUT jacks
Connect an audio device.
3 MIDI IN connector
You can connect a device here that outputs MIDI,
to control DMX lighting from that external MIDI
device.
4 DMX OUT 5-pin connector/3-pin connector
These are output connectors for DMX signals.
Use either the 5-pin or the 3-pin connector,
depending on what DMX lighting equipment
you are using.
* Pin assignment of DMX OUT connectors
1 2 3 4 5
To AC outlet
1 2 3 4
ÃGround terminal
Connect this to an
external earth or
ground. This should
be connected when
necessary.
2: Data–
1: GND
3: Data+
1: GND
2: Data–
3: Data+
Plug holder
3
Connection Example
Basic Operations
Turning the Power On
* To prevent malfunction and equipment failure,
always turn down the volume, and turn o all the
units before making any connections.
1. Mute the audio output of the devices
connected to this unit.
2. Connect the included adaptor to the DC IN jack
of this unit, and plug the adaptor into an AC
outlet.
This turns the power on.
3. Adjust the volume of the external devices.
Turning the Power O
1. Mute the audio output of the external devices.
2. Disconnect this unit’s adaptor from the power
outlet, and turn o the power of this unit.
NOTE
Before turning the unit on/o, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound when
switching the unit on/o. However, this is normal
and does not indicate a malfunction.
* Do not use a USB cable that is designed only for
charging a device. Charge-only cables cannot
transmit data.
DMX-compatible lighting
equipment
MIDI device
Audio input/output device
Computer for conguring DMX channels Video source device Display for video output

Produktspecifikationer

Varumärke: Roland
Kategori: Lättnad
Modell: VC-1-DMX

Behöver du hjälp?

Om du behöver hjälp med Roland VC-1-DMX ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Roland Manualer

Roland

Roland VC-1-DMX Bruksanvisning

5 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Ansmann

Ansmann FL4500AC Bruksanvisning

27 Oktober 2024
Brennenstuhl

Brennenstuhl 1171250801 Bruksanvisning

27 Oktober 2024
Steinel

Steinel FRS 30 Bruksanvisning

27 Oktober 2024
Stairville

Stairville DMX Invader 2420 MK II Bruksanvisning

27 Oktober 2024
Aqara

Aqara LED Light Bulb (Tunable White) Bruksanvisning

26 Oktober 2024
V-Tac

V-Tac VT-7959 Bruksanvisning

26 Oktober 2024
Quoizel

Quoizel Latitude LTT1628EK Bruksanvisning

26 Oktober 2024
Elan

Elan Osk 83765 Bruksanvisning

25 Oktober 2024
ET2

ET2 Centrum E23312-24PC Bruksanvisning

23 Oktober 2024
ET2

ET2 Blossom E32797-93BK Bruksanvisning

23 Oktober 2024