Royal Sovereign RS-SAFE120L Bruksanvisning

Royal Sovereign Valv RS-SAFE120L

Läs nedan 📖 manual på svenska för Royal Sovereign RS-SAFE120L (2 sidor) i kategorin Valv. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

1. Remove plastic emergency override key cover from front of safe

2. Insert override key into lock and turn key clockwise

3. Pull door open

1. Open safe with emergency override key

2. Open the battery compartment and add the 4 AA batteries

3. You will hear a beep, this means the safe is ready to be programed

1. Press the “ ” button twice, the screen will display “ ”CLEAR PROG

2. Once “ ” disappears input the default master code “ ”, the screen will display PROG 888888

“ ”NEW

3. When “ ” disappears, key in any 6 digit combination within 15NEW seconds, the screen will

display “ ”AGAIN

4. Enter the same 6 digit combination within 15 seconds. The screen will display “ ” once DONE

the master code is accepted

Box Contents

1. Safe

2. 2 Emergency override keys

3. 2 Mounting bolts

4. Scratch resistant carpet

5. 4 AA batteries

6. Allen wrench

Parts

1. Locking bolts

2. Battery compartment

3. Light

4. Control panel

5. Emergency override key cover/

Digital Display

OPEN THE SAFE – USING EMERGENCY OVERRIDE KEY

Owner’s Manual

RS-SAFE120L

GETTING STARTED

SET A MASTER CODE

*Always remember this master code as you will not be able to rest it once it’s programed.

Door should always be left open and unlocked for the next guest.

1. Hold safe door closed. Enter a 3-6 digit code onto the keypad.

2. Press “ buttonLOCK”

3. The locking bolts will begin to close, once the safe is fully closed the display will read

“ ”CLOSED

*Be sure to hold the safe door closed until display reads “CLOSED” otherwise safe will beep and display

“ ”ERROR .

1. Enter the 4-6 digit code onto the keypad that was previously set

2. Locks will begin to open

3. Once the safe is fully opened the display will read “ ”OPENED

*3 continuous wrong entries will lock the guest out of the safe for 15 minutes.

**If guest forgets their code use emergency override keys or

master code to unlock the safe. Then follow the steps to lock the safe to program a new guest code.

For more information go to www.royalsovereign.com

1. NEVER keep your emergency override keys inside your safe

2. Safe is only considered secure when fixed to a load bearing wall or join

3. Safe has limited 1 year warranty

Mount safe to an area that is not easy to move

1. Open safe and locate the predrilled holes on the back or bottom of the safe

2. Drill holes for expansion bolts

3. Turn the expansion bolts counter clockwise to separate

4. Use the expansion bolts to secure the safe to the wall

5. Make sure the safe is mounted in place as required and then tighten all screws

MOUNTING

IMPORTANT INFORMATION

SET A GUEST CODE

To Lock the Safe

To Open the Safe

Produktspecifikationer

Varumärke:	Royal Sovereign
Kategori:	Valv
Modell:	RS-SAFE120L

Behöver du hjälp?

Om du behöver hjälp med Royal Sovereign RS-SAFE120L ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Valv Royal Sovereign Manualer

Royal Sovereign RS-SAFE120L Bruksanvisning

9 September 2024

Valv Manualer

Nyaste Valv Manualer

Burg-Wachter Diplomat MTD 740 E FP Bruksanvisning

6 December 2024

Burg-Wachter WS Office-Doku 821 E FP Bruksanvisning

6 December 2024

Burg-Wachter Point-Safe P3 Bruksanvisning

6 December 2024

Phoenix Fire Fighter II FS0442E Bruksanvisning

27 Oktober 2024

Olympia GOsafe 5300 Bruksanvisning

27 Oktober 2024

Olympia GOsafe H20 Bruksanvisning

27 Oktober 2024

SereneLife SLSV45EQG Bruksanvisning

26 Oktober 2024

Salvus S2 serie Bruksanvisning

20 Oktober 2024

Phoenix FS1512 Bruksanvisning

15 Oktober 2024

Phoenix CB0102K Bruksanvisning

15 Oktober 2024