Russound A2100 Bruksanvisning

Russound mottagare A2100

Läs nedan 📖 manual på svenska för Russound A2100 (8 sidor) i kategorin mottagare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
A2100
Digital Amplier
Installation Manual
2Russound A2100 Installation Manual
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sucient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
3
Russound A2100 Installation Manual
Introduction
The A2100 is a 2-channel digital amplier designed to be used to boost audio
amplication where needed, either as a standalone amplier, or as an addition
to a whole-house distributed audio system in order to provide extra amplier
power in larger rooms or spaces. Its space-saving ½-rack design allows for
quick installation and gives exibility of mixing and matching with other
½-rack products to save valuable equipment rack space.
The powerful 100-watt class D amplier in the A2100 is combined with
features such as 12v trigger control, audio sensing, volume gain adjustment,
and a buered line output that enables even more amplication of the same
audio signal when needed.
Product Features
Class D amplier – The cool running, low-prole, high eciency design makes
the A2100 the perfect choice for even the most space-conscious system
designs
100w per channel – A powerful 100 watts per channel are available to provide
ample power to even the largest of spaces
Loop Output – A buered loop output is available for the audio signal,
allowing additional ampliers to be easily driven from the same signal
Trigger in/out – The A2100 can be activated by a 12VDC trigger signal, and can
activate additional devices at the same time
Multiple Turn-on modes:
Always On - The A2100 is always active and ready for use
Signal-sensing – The A2100 is in a standby mode when no audio signal is
present and will turn on when an audio signal is detected
12v Trigger – Using the 12v trigger allows precise turn on/o when the
amplier is needed, keeping the unit in a power saving standby mode when
not in use
Multiple Output modes:
• 8Ω - optimized mode for 8-ohm stereo output
• 4Ω - optimized mode for 4-ohm stereo output
• Bridge – allows the use of the A2100 as a powerful, 8-ohm mono amplier
PRODUCT OVERVIEW
Removable speaker connectors – allow for quick, secure installation and
accommodate cables of up to 12 ga AWG
Cord Lock – Flip-down cord lock keeps the IEC power cord in its place,
preventing accidental disconnection when moving gear in a stack or when
pivoting a rack for service
Thermal Protection
All Russound ampliers are designed with special circuitry to safeguard the
amplier under a thermal overload condition. Thermal protection mode can
only engage when the unit has been run at high volume for extended periods
of time without adequate ventilation and/or when speaker impedances
are below the minimum levels for the amplier. If this fault occurs, turn
o the amplier, and check that the speaker impedance rating is above the
minimum rating. Also check for adequate ventilation around the amplier and
make adjustments if necessary. Once the unit has cooled to safe operating
temperatures, the amplier may be powered back on.
Protection Circuitry
All Russound ampliers are designed with special circuitry to safeguard the
amplier under a short-circuit condition. A faulty speaker can also cause a
short circuit condition. The front panel LED illuminates orange when the
amplier is in short circuit protection. If this fault condition occurs, turn o the
amplier and check speakers for short circuit conditions when appropriate.

Produktspecifikationer

Varumärke: Russound
Kategori: mottagare
Modell: A2100

Behöver du hjälp?

Om du behöver hjälp med Russound A2100 ställ en fråga nedan och andra användare kommer att svara dig


mottagare Russound Manualer

Russound

Russound D1290 Bruksanvisning

25 September 2024
Russound

Russound AVA2.1 Bruksanvisning

21 September 2024
Russound

Russound XStream X5 Bruksanvisning

21 September 2024
Russound

Russound MCA-C5 Bruksanvisning

21 September 2024
Russound

Russound P75 Bruksanvisning

21 September 2024
Russound

Russound AVA3.1 Bruksanvisning

21 September 2024
Russound

Russound TVA2.1 Bruksanvisning

21 September 2024
Russound

Russound D250LS Bruksanvisning

21 September 2024
Russound

Russound A2100 Bruksanvisning

21 September 2024
Russound

Russound R290DS Bruksanvisning

21 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Speco Technologies

Speco Technologies PBM120AT Bruksanvisning

27 Oktober 2024
Fosi Audio

Fosi Audio V3 Bruksanvisning

26 Oktober 2024
Jensen

Jensen CAR710-4BC Bruksanvisning

26 Oktober 2024
Onkyo

Onkyo TX-RZ830 Bruksanvisning

24 Oktober 2024
Pioneer

Pioneer VSX-1122K Bruksanvisning

22 Oktober 2024
NAD

NAD C 355BEE Bruksanvisning

21 Oktober 2024
Yamaha

Yamaha HTR-5072 Bruksanvisning

21 Oktober 2024
Yamaha

Yamaha RX-A810 Bruksanvisning

20 Oktober 2024
Sherwood

Sherwood R-607 Bruksanvisning

20 Oktober 2024
Denon

Denon AVC-S660H Bruksanvisning

19 Oktober 2024