Ryobi AG403G Bruksanvisning
Ryobi
Slipmaskin
AG403G
Läs nedan 📖 manual på svenska för Ryobi AG403G (36 sidor) i kategorin Slipmaskin. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/36
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
4-1/2 in. ANGLE GRINDER
DOUBLE INSULATED
MEULEUSE ANGULAIRE DE
115 mm (4-1/2 po)
DOUBLE ISOLATION
AMOLADORA ANGULAR DE
115 mm (4-1/2 pulg.)
DOBLE AISLAMIENTO
AG403 / AG403G
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Angle Grinder, Wrench, Disc
Flange, Flange Nut, Side Handle, Grinding
Wheel, Operator’s Manual
TABLE OF CONTENTS
****************
General Safety Rules .......................2-3
Specific Safety Rules ......................3-5
Symbols ..............................................6
Electrical ............................................. 7
Features ..............................................8
Assembly .........................................8-9
Operation .......................................9-10
Maintenance ..................................... 11
Illustrations ..................................12-13
Parts Ordering / Service Back Page .....
INCLUT : Meuleuse d’angle, clé, bride
circulaire, écrou de flasque, poignée
latérale, meule, manuel d’utilisation
TABLE DES MATIÈRES
****************
Règles de sécurité générales ..........2-3
Règles de sécurité particulières 3-5 ......
Symboles 6 ............................................
Caractéristiques électriques 7 ...............
Caractéristiques .................................8
Assemblage .....................................8-9
Utilisation .......................................9-10
Entretien ...........................................11
Illustrations 12-13 ..................................
Commande de pièces /
réparation Page arrière ..........................
INCLUYE: Amoladora angular, llave, brida
circular, tuerca bridada, mango lateral,
muela abrasiva, manual del operador
ÍNDICE DE CONTENIDO
****************
Reglas de seguridad generales 2-3 .......
Reglas de seguridad específicas 3-5 ....
Símbolos 6 ............................................
Aspectos eléctricos 7 ............................
Características 8 ...................................
Armado 8-9 ............................................
Funcionamiento 9-10 .............................
Mantenimiento 11 ..................................
Ilustraciones 12-13 ................................
Pedidos de piezas /
servicio Pág. posterior ..........................
2 - English
WARNING!
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or seri-
ous injury. The term “power tool” in all of the warnings
listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropri-
ate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations dif-
ferent from those intended could result in a hazardous
situation.
GENERAL SAFETY RULES
3 - English
SPECIFIC SAFETY RULES
SAFETY WARNINGS COMMON FOR GRIND-
ING, SANDING, WIRE BRUSHING AND POLISH-
ING OPERATIONS
This power tool is intended to function as a grinder,
sander, wire brush, or polisher. Read all safety warn-
ings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all in-
structions listed below may result in electric shock, fire
and/or serious injury.
Operations such as cutting-off are not recommended
to be performed with this power tool. Operations for
which the power tool was not designed may create a
hazard and cause personal injury.
Do not use accessories which are not specifically
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your
power tool, does not assure safe operation.
The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their RATED SPEED
can break and fly apart.
The outside diameter and the thickness of your acces-
sory must be within the capacity rating of your power
tool. Incorrectly sized accessories cannot be adequately
guarded or controlled.
The arbour size of wheels, flanges, backing pads or
any other accessory must properly fit the spindle of
the power tool. Accessories with arbour holes that do
not match the mounting hardware of the power tool will
run out of balance, vibrate excessively and may cause
loss of control.
Do not use a damaged accessory. Before each use in-
spect the accessory such as abrasive wheels for chips
and cracks, backing pad for cracks, tear or excess
wear, wire brush for loose or cracked wires. If power
tool or accessory is dropped, inspect for damage or
install an undamaged accessory. After inspecting and
installing an accessory, position yourself and bystand-
ers away from the plane of the rotating accessory and
run the power tool at maximum no-load speed for one
minute. Damaged accessories will normally break apart
during this test time.
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments.
The eye protection must be capable of stopping
flying debris generated by various operations. The
eye protection must be capable of stopping flying debris
generated by various operations. The dust mask or
respirator must be capable of filtrating particles generated
by your operation. Prolonged exposure to high intensity
noise may cause hearing loss.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment. Fragments of workpiece or of a
broken accessory may fly away and cause injury beyond
immediate area of operation.
Hold power tool by insulated gripping surfaces only,
when performing an operation where the cutting ac-
cessory may contact hidden wiring or its own cord.
Cutting accessory contacting a ²live² wire may make
exposed metal parts of the power tool ²live² and shock
the operator.
Position the cord clear of the spinning accessory. If
you lose control, the cord may be cut or snagged and your
hand or arm may be pulled into the spinning accessory.
Never lay the power tool down until the accessory
has come to a complete stop. The spinning accessory
may grab the surface and pull the power tool out of your
control.
Do not run the power tool while carrying it at your
side. Accidental contact with the spinning accessory
could snag your clothing, pulling the accessory into your
body.
Regularly clean the power tool’s air vents. The motor’s
fan will draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical
hazards.
GENERAL SAFETY RULES
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
WARNING!
To reduce the risk of injury, user must read instruction
manual.
When servicing a power tool, use only identical replace-
ment parts. Follow instructions in the Maintenance sec-
tion of this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of
shock or injury.
Produktspecifikationer
| Varumärke: | Ryobi |
| Kategori: | Slipmaskin |
| Modell: | AG403G |
Behöver du hjälp?
Om du behöver hjälp med Ryobi AG403G ställ en fråga nedan och andra användare kommer att svara dig
Slipmaskin Ryobi Manualer
2 Oktober 2024
24 Augusti 2024
14 Augusti 2024
28 Juli 2024
25 Juli 2024
Slipmaskin Manualer
- Slipmaskin Bosch
- Slipmaskin AEG
- Slipmaskin DeWalt
- Slipmaskin Adler
- Slipmaskin Silverline
- Slipmaskin Ferm
- Slipmaskin Ozito
- Slipmaskin Gude
- Slipmaskin Gorenje
- Slipmaskin Silvercrest
- Slipmaskin Makita
- Slipmaskin Tryton
- Slipmaskin Hitachi
- Slipmaskin Black And Decker
- Slipmaskin Vonroc
- Slipmaskin Stanley
- Slipmaskin Skil
- Slipmaskin Hyundai
- Slipmaskin Yato
- Slipmaskin Hilti
- Slipmaskin Profitec
- Slipmaskin Festool
- Slipmaskin Metabo
- Slipmaskin United Office
- Slipmaskin Parkside
- Slipmaskin Worx
- Slipmaskin Meec Tools
- Slipmaskin Milwaukee
- Slipmaskin Hikoki
- Slipmaskin Dremel
- Slipmaskin ABB
- Slipmaskin Hazet
- Slipmaskin Einhell
- Slipmaskin Baumr-AG
- Slipmaskin Husqvarna
- Slipmaskin Maktec
- Slipmaskin Bort
- Slipmaskin Craftsman
- Slipmaskin Yamato
- Slipmaskin Power Craft
- Slipmaskin Powerplus
- Slipmaskin Cotech
- Slipmaskin Genesis
- Slipmaskin Bunn
- Slipmaskin Eibenstock
- Slipmaskin Scheppach
- Slipmaskin Gamma
- Slipmaskin Bavaria
- Slipmaskin Flex
- Slipmaskin Duro
- Slipmaskin Nuova Simonelli
- Slipmaskin Pattfield
- Slipmaskin Defort
- Slipmaskin Truper
- Slipmaskin Solo
- Slipmaskin Cocraft
- Slipmaskin Toolcraft
- Slipmaskin RIDGID
- Slipmaskin Batavia
- Slipmaskin Proxxon
- Slipmaskin Fein
- Slipmaskin Stomer
- Slipmaskin Goon
- Slipmaskin Ergofix
- Slipmaskin Global
- Slipmaskin Rikon
- Slipmaskin Duro Pro
- Slipmaskin Victoria Arduino
- Slipmaskin Alpha Tools
- Slipmaskin SW-Stahl
- Slipmaskin ATI-ZDL
- Slipmaskin Gude Pro
- Slipmaskin Einhell Bavaria
- Slipmaskin McKenzie
- Slipmaskin Gladiator
- Slipmaskin Rodcraft
- Slipmaskin Bavaria By Einhell
- Slipmaskin Chicago Pneumatic
- Slipmaskin Mirka
- Slipmaskin Classic Power
- Slipmaskin Handwerk
Nyaste Slipmaskin Manualer
26 Oktober 2024
26 Oktober 2024
23 Oktober 2024
17 Oktober 2024
17 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
13 Oktober 2024
8 Oktober 2024