Ryobi RID1801 Bruksanvisning
Ryobi
Borrmaskin
RID1801
Läs nedan 📖 manual på svenska för Ryobi RID1801 (10 sidor) i kategorin Borrmaskin. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/10
ORIGINAL INSTRUCTIONS
Cordless Impact Driver
RID1801
Important!
It is essential that you read the instructions in this manual before operating
this machine.
Subject to technical modications.
Safety
1
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. PERSONAL SAFETY
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
c. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
nger on the switch or energising power tools that
have the switch on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. POWER TOOL USE AND CARE
a. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
e. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
Produktspecifikationer
| Varumärke: | Ryobi |
| Kategori: | Borrmaskin |
| Modell: | RID1801 |
Behöver du hjälp?
Om du behöver hjälp med Ryobi RID1801 ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin Ryobi Manualer
25 September 2024
25 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
11 September 2024
10 September 2024
Borrmaskin Manualer
- Borrmaskin Bosch
- Borrmaskin AEG
- Borrmaskin IKEA
- Borrmaskin DeWalt
- Borrmaskin Silverline
- Borrmaskin Ferm
- Borrmaskin Workzone
- Borrmaskin Ozito
- Borrmaskin Gude
- Borrmaskin Makita
- Borrmaskin Tryton
- Borrmaskin Hitachi
- Borrmaskin Black And Decker
- Borrmaskin Vonroc
- Borrmaskin Maestro
- Borrmaskin Stanley
- Borrmaskin Skil
- Borrmaskin Hyundai
- Borrmaskin Yato
- Borrmaskin Hilti
- Borrmaskin Festool
- Borrmaskin Metabo
- Borrmaskin Parkside
- Borrmaskin Worx
- Borrmaskin Meec Tools
- Borrmaskin Milwaukee
- Borrmaskin Hikoki
- Borrmaskin Sun Joe
- Borrmaskin Hazet
- Borrmaskin Einhell
- Borrmaskin Baumr-AG
- Borrmaskin Velleman
- Borrmaskin Maktec
- Borrmaskin Bort
- Borrmaskin Tanaka
- Borrmaskin Craftsman
- Borrmaskin Power Craft
- Borrmaskin Powerplus
- Borrmaskin Porter-Cable
- Borrmaskin Genesis
- Borrmaskin Eibenstock
- Borrmaskin Topcraft
- Borrmaskin Scheppach
- Borrmaskin Gamma
- Borrmaskin Clas Ohlson
- Borrmaskin Powerfix
- Borrmaskin Carat
- Borrmaskin Kress
- Borrmaskin Bavaria
- Borrmaskin Flex
- Borrmaskin Duro
- Borrmaskin Kawasaki
- Borrmaskin Berner
- Borrmaskin Mafell
- Borrmaskin Fieldmann
- Borrmaskin Varo
- Borrmaskin Truper
- Borrmaskin Kinzo
- Borrmaskin Bruder Mannesmann
- Borrmaskin Cocraft
- Borrmaskin Powerblade
- Borrmaskin Meister Craft
- Borrmaskin Toolcraft
- Borrmaskin RIDGID
- Borrmaskin Rupes
- Borrmaskin Batavia
- Borrmaskin Proxxon
- Borrmaskin Protool
- Borrmaskin Westfalia
- Borrmaskin Economy
- Borrmaskin Holzmann
- Borrmaskin Fein
- Borrmaskin Huvema
- Borrmaskin Stomer
- Borrmaskin Fe Powertools
- Borrmaskin Elu
- Borrmaskin Max Bahr
- Borrmaskin Lux Tools
- Borrmaskin Goon
- Borrmaskin Wolfcraft
- Borrmaskin Dedra
- Borrmaskin Kreg
- Borrmaskin Sthor
- Borrmaskin Spit
- Borrmaskin Global
- Borrmaskin Rok
- Borrmaskin Profitech
- Borrmaskin Graphite
- Borrmaskin Narex
- Borrmaskin Rikon
- Borrmaskin Duro Pro
- Borrmaskin Baier
- Borrmaskin Alpha Tools
- Borrmaskin RUKO
- Borrmaskin Felisatti
- Borrmaskin MSW
- Borrmaskin Ribimex
- Borrmaskin Robust
- Borrmaskin Einhell Bavaria
- Borrmaskin Ergotools Pattfield
- Borrmaskin MyTool
- Borrmaskin McKenzie
- Borrmaskin G-Technology
- Borrmaskin Rodcraft
- Borrmaskin Bavaria By Einhell
- Borrmaskin Handwerk
- Borrmaskin Stalco
Nyaste Borrmaskin Manualer
27 Oktober 2024
24 Oktober 2024
23 Oktober 2024
21 Oktober 2024
20 Oktober 2024
19 Oktober 2024
19 Oktober 2024
18 Oktober 2024
16 Oktober 2024
16 Oktober 2024