Ryobi RLT254SDSO Bruksanvisning

Ryobi Häcksax RLT254SDSO

Läs nedan 📖 manual på svenska för Ryobi RLT254SDSO (48 sidor) i kategorin Häcksax. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/48

ORIGINAL INSTRUCTIONS

Grass Trimmer

RLT254CDSO

RLT254SDSO HERO SHOT TO

FOLLOW ONCE

AVAILABLE

Important!

It is essential that you read the instructions in this manual before assembling,

operating, and maintaining the product.

Subject to technical modification.

Safety, performance, and dependability have been given

top priority in the design of your grass trimmer.

INTENDED USE

The grass trimmer is intended to be used only by adults who

have read and understood the instructions and warnings

in this manual and can be considered responsible for their

actions. The product is only intended for use outdoors in a

well-ventilated area. For safety reasons, the product must

be adequately controlled by a two-handed operation.

The product is designed for cutting grass, light weeds,

and other similar vegetation at or about ground level.

The cutting plane should be approximately parallel to the

ground surface.

The product should not be used to cut or trim hedges,

bushes, or other vegetation where the cutting plane is not

or about ground surface level.

Do not use the product for any other purpose.

WARNING

To reduce the risk of injury, the user must read and

understand the operator’s manual.

WARNING

Do not attempt to operate the product until you

have read thoroughly and understood completely all

instructions and safety rules contained in this manual.

Failure to comply may result in accidents involving fire,

electric shock, or serious personal injury. Save the

operator’s manual and review frequently for continuing

safe operation and instructing others who may use the

product.

WARNING

The product is not intended to be used by children or

persons with reduced physical, mental, or sensory

capabilities. Children should be adequately supervised

to ensure they do not play with the product.

GENERAL SAFETY WARNINGS

■ For safe operation, read and understand all instructions

before using the product. Follow all safety instructions.

Failure to follow all safety instructions listed below, can

result in serious personal injury.

■ Some regions have regulations that restrict the use of

the product. Check with your local authority for advice.

■ Do not allow children or untrained individuals to use the

product.

■ Never start or run the engine in a closed or poorly

ventilated area; breathing exhaust fumes can kill.

■ Clear the work area before each use. Remove all

objects such as rocks, broken glass, nails, wire, or

string that can be thrown or become entangled in the

string head.

■ Wear full eye and hearing protection while operating the

product. If working in an area where there is a risk of

falling objects, head protection must be worn.

■ Hearing protection may restrict the operator’s ability

to hear warning sounds. Pay particular attention to

potential hazards around and inside the working area.

■ Wear heavy, long trousers, non-slip protective footwear,

and gloves. Do not wear loose fitting clothing, short

trousers, jewellery of any kind, or use with bare feet.

■ Secure long hair so it is above shoulder level to prevent

entanglement in any moving parts.

■ Keep all bystanders, children, and pets at least 15 m

away. Stop the product if anyone enters the area.

■ Do not use the product when tired, ill, under medication,

or under the influence of alcohol and drugs.

■ Do not use in poor lighting. The operator needs clear

unrestricted vision to identify potential hazards.

■ Keep firm footing and balance at all times. Do not

overreach. Overreaching can result in loss of balance

or exposure to hot surfaces.

■ Keep all parts of your body away from any moving part.

■ Do not touch the area around the silencer or cylinder of

the product, these parts get hot from operation.

■ Always stop the engine and allow it to cool down before

making any adjustments.

■ Do not smoke when mixing the fuel or when filling the

fuel tank.

■ Mix and store the fuel in a container that is approved

for fuel.

■ Mix the fuel outdoors where there are no sparks or

flames. Wipe up any fuel spillage. Move 9 m away from

refueling site before starting engine.

■ Stop the engine and allow it to cool down before

refueling or storing the product.

■ Allow the engine to cool down; empty the fuel tank and

secure the product from moving before transporting in

a vehicle.

■ Turn off the engine. Make sure all moving parts have

come to a complete stop:

●before servicing

●before clearing a blockage

●before checking, cleaning, and working on the

product

●before changing accessories

●after striking a foreign object

●whenever leaving the product unattended

●whenever performing maintenance

●whenever the product starts to vibrate abnormally

WARNING

Never use cutting means or attachments which are not

specified by RYOBI in this manual. This includes the

use of metal multi-piece pivoting chains and flail-blades.

These items are known to break up during use and

present a high risk of serious injury to the operator or

bystanders.

WARNING

Inspection after dropping or other impacts: Thoroughly

inspect the product and identify any problems or damage

to it. Any part that is damaged should be properly

repaired or replaced by an authorised service centre.

Produktspecifikationer

Varumärke:	Ryobi
Kategori:	Häcksax
Modell:	RLT254SDSO
Vikt:	1220 g
Bredd:	71 mm
Djup:	244 mm
Höjd:	37.5 mm
Internationell säkerhetskod (IP):	IP20
Hållbarhetscertifikat:	RoHS
Uteffekt:	200 W
Spännande:	54 V
AC-ingångsspänning:	100 - 305 V