SAB Goblin Kraken Bruksanvisning

SAB Radiostyrda leksaker Goblin Kraken

Läs nedan 📖 manual på svenska för SAB Goblin Kraken (48 sidor) i kategorin Radiostyrda leksaker. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/48
8 – Head Assembly
9 – Assembling of the modules
10 – Tail Group Assembly
11 – Tail Boom Assembly
12 – Low Side Frame Installation
13 – Landing Gear Installation
14 – Installation of The Motor
1 – Introduction
2 – Important Notes
3 – Note for Assembly
4 – Carbon Rod Assembly
5 – Transmission Group Assembly
6 – Swashplate Servos Assembly
7 – Frame Group Assembly
INDEX
15 – Installation ESC/FBL/RX
16 – Installation Batteries
17 – Installation Canopy
18 – In flight
19 – Maintenance
20 – Transmission Module
21 – Check list
22 – Spare Parts
http://www.goblin-helicopter.com
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site
www.goblin-helicopter.com
for updates and other important information.
VERY IMPORTANT
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for any issues with your model
and will not provide support unless you register your model.
The Serial number is also engraved in the Aluminum part.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
You will find your serial number on the RED plate of the transmission module and on the product card
included with your kit.
Please take a moment to register your kit online via our web site at:
Page 1
1558mm
345mm
Typical Speed Controller: 12S, 160/200 A
Typical Motor : 12S, 500-560 Kv, 4525 - 4530 series,
(max 62 mm diameter, max 70 mm height).
Battery compartment: 12S, 4200/5500 mAh.
(max 56mmx70mmx320mm).
Suggested weight from 1400gr to 1700gr.
Minimum tail blades size: 105mm
Maximum tail blades size: 115mm
KIT Includes:
• 21T motor pulley (other pulley sizes available).
• 2 battery trays with straps.
190mm
• AIRFRAME weight:
2680 ( with blades, no battery, no electronics ).
• Main rotor diameter:
1558 mm (with 690 mm blades).
• Main blade length:
650 to 730mm.
• Tail rotor diameter:
284 mm (with 105 mm tail blades).
• Tail blade length:
105 to 115 mm.
GOBLIN KRAKEN TECHNICAL SPECIFICATIONS
• Cyclic Servos:
Standard size 40mm.
• Tail Servo:
Standard size 40mm.
• Main Rotor Ratio :
12.1 to 8.8 :1 ( 21T included: 10.4:1).
• Tail Rotor Ratio :
5.0-4.8:1 ( 27T included: 4.8:1 ).
• 690 mm main blades.
• 105 mm tail blades.
Page 2

Produktspecifikationer

Varumärke: SAB
Kategori: Radiostyrda leksaker
Modell: Goblin Kraken

Behöver du hjälp?

Om du behöver hjälp med SAB Goblin Kraken ställ en fråga nedan och andra användare kommer att svara dig




Radiostyrda leksaker SAB Manualer

SAB

SAB SG725 Bruksanvisning

8 September 2024
SAB

SAB SG508 Bruksanvisning

4 September 2024
SAB

SAB SG707 Bruksanvisning

4 September 2024
SAB

SAB SG571 Bruksanvisning

3 September 2024
SAB

SAB SG715 Bruksanvisning

1 September 2024
SAB

SAB SG711 Bruksanvisning

31 Augusti 2024
SAB

SAB SG570 Bruksanvisning

29 Augusti 2024

Radiostyrda leksaker Manualer

Nyaste Radiostyrda leksaker Manualer