Schuberth SC1M Bruksanvisning

Läs nedan 📖 manual på svenska för Schuberth SC1M (76 sidor) i kategorin Headset. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/76
User’s Guide
www.schuberth.com
SCHUBERTH SC1M
English
SC1M
CONTENTS
Safety Precautions .................................................................................................4
1 INTRODUCTION ............................................................................................... 7
2 PACKAGE CONTENTS......................................................................................8
2.1 SC1M ................................................................................................................................................. 8
2.2 RC3 ................................................................................................................................................... 8
3 INSTALLING THE SC1M ON YOUR HELMET.....................................................9
3.1 Installing the SC1M .......................................................................................................................... 9
3.2 Installing the RC3............................................................................................................................. 9
4 GETTING STARTED .........................................................................................10
4.1 Button Operation ............................................................................................................................10
4.2 Powering On and O .......................................................................................................................11
4.3 Charging ...........................................................................................................................................11
4.4 Remote Control Pairing ..................................................................................................................12
4.5 Checking the Battery Level ...........................................................................................................12
4.6 Volume Adjustment......................................................................................................................... 12
4.7 Softwares ........................................................................................................................................13
5 PAIRING THE SC1M WITH BLUETOOTH DEVICES ..........................................13
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device ...............................................13
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10 ...................................14
5.3 Advanced Selective Pairing - A2DP Stereo or Handsfree ..........................................................15
5.4 Intercom Pairing ..............................................................................................................................15
6 MOBILE PHONE, GPS, SR10 ...........................................................................16
6.1 Mobile Phone Call Making and Answering ...................................................................................16
6.2 Speed Dialing ...................................................................................................................................17
6.3 GPS Navigation ...............................................................................................................................17
6.4 Sena SR10, Two-Way Radio Adapter .............................................................................................17
7 STEREO MUSIC ..............................................................................................18
7.1 Bluetooth Stereo Music .................................................................................................................18
7.2 Music Sharing .................................................................................................................................18
8 INTERCOM .....................................................................................................19
8.1 Two-way Intercom .......................................................................................................................... 19
8.2 Multi-way Intercom .........................................................................................................................19
9 THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT .....................................................................21
10 GROUP INTERCOM ........................................................................................21
11 UNIVERSAL INTERCOM ................................................................................. 22
12 FM RADIO ...................................................................................................... 23
12.1 FM Radio On/O ........................................................................................................................... 23
12.2 Preset Stations............................................................................................................................... 23
12.3 Seek and Save................................................................................................................................ 23
12.4 Scan and Save ............................................................................................................................... 23
12.5 Temporary Preset .......................................................................................................................... 23
12.6 FM Sharing ..................................................................................................................................... 24
12.7 Region Selection ............................................................................................................................ 24
13 FUNCTION PRIORITY ..................................................................................... 25
14 CONFIGURATION SETTING ........................................................................... 25
14.1 Headset Conguration Setting .....................................................................................................25
14.2 Software Conguration Setting ...................................................................................................26
15 FIRMWARE UPGRADE ................................................................................... 30
English
SC1M
16 TROUBLESHOOTING ..................................................................................... 30
16.1 Fault Reset ..................................................................................................................................... 30
16.2 Factory Reset ................................................................................................................................. 30
CERTIFICATION AND SAFETY APPROVALS ..........................................................31
FCC Compliance Statement ...............................................................................................................31
FCC RF Exposure Statement .............................................................................................................31
FCC Caution .........................................................................................................................................31
CE Declaration of Conformity............................................................................................................ 32
Industry Canada Statement ............................................................................................................... 32
Bluetooth License .............................................................................................................................. 33
WEEE (Waste Electrical and Electronic Equipment) .......................................................................33
PRODUCT WARRANTY AND DISCLAIMER ........................................................... 34
Limited Warranty................................................................................................................................. 34
Warranty Exclusions ........................................................................................................................... 36
Warranty Service .................................................................................................................................37
SC1M
4
Safety Precautions
Please ensure that the product is properly used by observing the safety precautions below
to prevent any risk of serious injury, death and/or damage to property.
Hazard alert signal words
The following safety symbols and signal words are used in this manual.
WARNING Indicates a potential hazardous situations that, if not avoided, could
result in death or serious injury.
CAUTION Indicates a potential hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related. If
not avoided, it could cause damage to your product.
Note
Notes, usage tips, or additional information
Product Use
Observe the following precautions to avoid injury or damage to your product while using the
product.
WARNING
Use of the product at a high volume for a long period of time may damage your eardrums
or hearing ability.
When relevant, follow all regulations regarding the use of the camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn o the camera when you are near medical equipment. Your camera can cause
interference with medical devices in hospital or healthcare facilities.
The camera generates a low level magnetic eld. Keep a safe distance between the
camera and cardiac pacemakers to avoid potential interference. Turn o the camera
immediately if your camera indicates interference with a pacemaker and contact the
pacemaker manufacturer or a physician.
Avoid interference with other electronic devices. Your camera generates a low level
magnetic eld that may interfere with unsealed or improperly shielded electronic
equipment in homes or vehicles. Consult the manufacturers of your electronic devices to
resolve any interference problems you experience.
Never use a damaged memory card. This may result in electric shock, camera malfunction,
or re.
Careless use of the product on the road is risky and may result in serious injury, death or
damage. You must heed all safety precautions in all documents that come with this
product. This will help minimize the chance these risks may occur while riding.
In any place where wireless communication is prohibited, such as hospitals or airplanes,
turn o the power. In a place where wireless communication is prohibited, electromagnetic
waves may cause hazards or accidents.
Before riding, fasten the product from the helmet, and double-check that it is properly
fastened. Separation of the product while riding will cause damage to the product and
may result in an accident.
When you use the product while you operating any vehicle or equipment such as
motorcycles, scooters, mopeds, ATVs, or quadbikes (hereinafter called “transportation
means”), you need to follow the safety precautions provided by the manufacturer of the
vehicle.
When you use the product, use good judgment; never use it under the inuence of
alcohol or drugs or when you are extremely tired.
SC1M
5
English
CAUTION
If the product emits an unusual smell, feels hot, or appears abnormal in any other way
while using or charging, stop using it immediately. It may cause damage, explosion, or re.
Contact your sales location if any of these problems are observed.
Do not use the product in an explosive atmosphere. If you are in such a location, turn o
the power and heed any regulations, instructions, and signs in the area.
NOTICE
Attaching the product to the helmet is considered a modication to the helmet and may
void your helmet’s warranty or compromise your helmet’s functionality. This may entail
risks during an accident, so be fully aware of this fact before using the product. Should
you not accept this fact, you may return the product for a full refund.
In some regions, it is prohibited by law to ride motorcycles while wearing headsets or
earbuds. Therefore be certain you are aware of all relevant laws in the region where you
are using the product and are sure that you comply with them.
The headset is for motorcycle helmets only. To install the headset, you must follow the
installation instructions shown in the User's Guide.
Do not impact the product with sharp tools as this may damage the product.
Keep product away from pets or small children. They may damage the product.
Any changes or modications to the equipment not expressly approved by the party
responsible for compliance could void the limited warranty to operate the equipment.
High internal temperature may result in noisy photos. This is not a malfunction and does
not aect your camera’s overall performance.
Check that the camera is operating properly in advance. Any le loss or camera damage
caused by camera malfunction or improper use is not covered under warranty.
Battery
Your product has a built-in battery. Be careful to heed all safety information in this guide.
Failure to carefully observe the safety precautions can cause battery heat generation,
bursting, re and serious personal injury.
WARNING
Do not use the product in direct sunlight for a long period of time. Doing so can damage
the product and generate heat that can cause burns.
Do not use or store the product inside cars in hot weather. It may cause the battery to
generate heat, rupture, or ignite.
Do not continue charging the battery if it does not recharge within the specied charging
time. Doing so may cause the battery to become hot, explode, or ignite.
Do not leave the product near open ames. Do not dispose of the product in a re. It may
cause the battery to become hot, explode, or ignite and cause serious injury.
Never attempt to charge a battery with the charger which has been physically damaged.
It may cause explosion and/or accidents.
NOTICE
Battery life may vary depending on conditions, environmental factors, functions of the
product in use, and devices used with it.
SC1M
6
Product Storage and Management
Take the following precautions to avoid personal injury or damage to your product while
storing and maintaining the product.
CAUTION
Do not dispose of the product with household waste. The built-in battery is not to be
disposed of in municipal waste stream and requires separate collection. Disposal of the
product should be done in accordance with the local regulations.
NOTICE
Keep the product free of dust. Dust may damage mechanical and electronic parts of the
product.
The product should be stored at room temperature. Do not expose the product to
extremely high or low temperature as this may reduce the life span of electronic devices,
damage the battery, and/or melt plastic parts of the product.
Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as
this may damage the product.
Do not paint the product. Paint may obstruct moving parts or interfere with the normal
operation of the product.
Do not drop or otherwise shock the product. It may damage the product or its internal
electronic circuits.
Do not disassemble, repair or modify the product as this may damage the product and
invalidate the product warranty.
Do not store the product in humid environments, especially for long periods of time. It
may damage the internal electronic circuits.
Battery performance will deteriorate over time if stored for a long period of time without
being used.
Do not store the camera in proximity to magnetic elds. Doing so may result in camera
malfunction.
Be careful to protect the lens by avoiding rough handling or physical shock.
Wipe the surface of the lens with a soft cloth in the following situations:
(1) When there are ngerprints on the lens surface.
(2) When the lens is used in hot or humid environments, such as near oceans or rivers.
Store the product in a well-ventilated room to protect the lens from dirt and dust.
SC1M
7
English
1 INTRODUCTION
Thank you for choosing the SCHUBERTH SC1M, Motorcycle Bluetooth
Communication System with Remote Control. With the SC1M, you can
control the headset using the Remote Control to call handsfree on your
Bluetooth mobile phone, listen to stereo music or voice instructions of
GPS navigations wirelessly, and have intercom conversations in full
duplex with a passenger or other motorcycle riders.
The SC1M is compliant with the Bluetooth 4.1 supporting the following
proles: Headset Prole, Hands-Free Prole (HFP), Advanced Audio
Distribution Prole (A2DP), and Audio Video Remote Control Prole
(AVRCP). Please check with the manufacturers of other device to
determine their compatibility with this headset.
Please read this User’s Guide carefully before using the headset. Also
check www.schuberth.com for the latest version of the User’s Guide
and additional information related to SCHUBERTH Bluetooth products.
The SC1M features:
Bluetooth 4.1
Invisible beauty with custom design
Bluetooth intercom up to 500 meters (550 yards)*
Audio Multitasking
Audio Source Priority
Four-way intercom
Voice prompts
Smartphone App for iPhone and Android
Built-in FM radio tuner with a station scan and save function
Universal Intercom™
Music sharing
FM sharing
Advanced Noise Control
Firmware upgradeable
* in open terrain
SC1M
8
2 PACKAGE CONTENTS
2.1 SC1M
SC1M Main Unit
USB Power & Data Cable
2.2 RC3
RC3 (Remote Control)
Hook and Loop Fasteners for RC3 (2)
Double Sided Adhesive Tapes for RC3 (2)
Clip Mount
Coin Battery
SC1M
9
English
3.2 Installing the RC3
There are three ways of installing the RC3.
Using the Clip
1 2
Using the Hook and Loop Fasteners
1. Attach the hook fastener to the RC3.
2. Attach the loop fastener to the helmet or the motorcycle body. Attach
the RC3 using the hook and loop fasteners that you tted.
1
Hook Fastener
2
Loop Fastener
3 INSTALLING THE SC1M ON YOUR
HELMET
3.1 Installing the SC1M
1. Remove the cover.
2. Insert the main unit into the helmet and push it gently until you hear
a click.
SC1M
10
Using the Adhesive Tape
1. Attach double sided adhesive tapes to the back plate of the RC3.
2. Attach double sided adhesive tapes to the helmet or the motorcycle
body.
3. Make sure that the main unit sticks on the helmet rmly. Maximum
adhesion occurs after 24 hours.
1 2
4 GETTING STARTED
4.1 Button Operation
SC1M
DC Power Charging
& Firmware Upgrade
Port
Status LED
Multi-function
Button
RC3
Battery Release Hole
Center Button
(+) Button (-) Button
Battery Slot
SC1M
11
English
4.2 Powering On and O
4.2.1 SC1M
Power on/othe SC1M
Using the SC1M
Press and hold the Multi-function Button for 1 second.
Using the RC3
Tap the (+) Button and the Center Button.
4.2.2 RC3
To begin using the RC3, remove the plastic tape from the battery slot.
To power on the device, tap the Center Button. To power o the device,
press and hold the (+) Button and the Center Button for 1 second.
4.3 Charging
4.3.1 SC1M
You can charge the SC1M by connecting the supplied USB power &
data cable into a computers USB port or USB wall charger. You can use
any standard micro USB cable to charge the unit. The LED turns red
while charging and turns blue when fully charged. It takes about 2.5
hours to be completely charged.
or
AC Adapter
Note:
Please make sure to take o your SC1M-installed helmet while charging. The
headset automatically turns oduring charging.
SC1M
12
4.3.2 RC3
The RC3 uses a CR2016 Lithium 3V coin battery. If the RC3 is
discharged, you can replace the battery with a new one. When closing
the battery slot, insert both ends of the rubber rst. To remove the
battery, insert a paper clip through the Battery Release Hole.
4.4 Remote Control Pairing
The SC1M and the Remote Control come paired together.
They will automatically connect to each other when the SC1M and the
remote control are powered on.
If you are using a remote control other than the one included in the package,
follow the procedure below to pair the SC1M and the Remote Control.
1. On the SC1M, press and hold the Multi-function Button for 5 seconds
and you will hear a voice prompt, “Remote control pairing”.
2. On the Remote Control, enter Bluetooth pairing mode by pressing (+)
button until the led ash red (approx. 8 sec.)
3. The SC1M will automatically perform pairing with the Remote Control
in pairing mode. When they are successfully connected, you will hear a
voice prompt, “Remote control connected”.
4.5 Checking the Battery Level
When the SC1M or the Remote Control is powering on, their red LED
ashes rapidly indicating the battery level.
4ashes = High, 70 ~ 100%
3ashes = Medium, 30 ~ 70%
2 ashes = Low, 0 ~ 30%
Note:
1.
The battery performance may be reduced over time with usage.
2.
Battery life may vary depending on conditions, environmental factors,
functions of the product in use, and devices used with it.
4.6 Volume Adjustment
You can easily adjust the volume by tapping the (–) Button or the (+)
Button. You will hear a beep when the volume reaches the maximum or
minimum level. The volume is set and maintained independently at
dierent levels for each audio source even when you reboot the
headset.
SC1M
13
English
5 PAIRING THE SC1M WITH
BLUETOOTH DEVICES
Before using the SC1M Bluetooth headset with any other Bluetooth
devices for the rst time, you will need to pair them together. You can
pair the SC1M with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3 players, or motorcycle specic Bluetooth GPS navigation,
and with other Sena Bluetooth headsets. The pairing operation is
required only once for each Bluetooth device. The headset remains
paired with the devices and automatically reconnects to them when
they are within range.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device
1. To enter the conguration menu, press and hold the Center Button for
10 seconds until you hear the voice prompt, “Conguration menu.
2. By tapping the (+) Button, you will hear the voice prompt, “Phone
pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the SC1M
in the list of the devices detected on the mobile phone.
4. If your mobile phone asks for a PIN, enter 0000.
4.7 Softwares
4.7.1 Device Manager
You can upgrade the headset’s rmware and congure its settings directly
from your PC or Apple computer. For more information on downloading
the Device Manager, please visit oem.sena.com/schuberth/.
4.7.2 Smartphone App
The Smartphone App allows you to congure device settings and read
the Users Guide and the Quick Start Guide. Run the Smartphone App
and you can congure its settings directly from your smartphone. You
can download the Smartphone App for Android or iPhone from
oem.sena.com/schuberth/.
SC1M
14
5.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. To enter the conguration menu, press and hold the Center Button for
10 seconds until you hear the voice prompt, Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Second mobile
phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the SC1M
in the list of the devices detected on the mobile phone.
4. If your mobile phone asks for a PIN, enter 0000.
Note:
1.
If you have two audio (A2DP) devices connected to your headset then the
audio from one device will interrupt the audio from the other device. For
example, if you are playing music from the primary mobile phone, then it can
be interrupted by playing music from the secondary mobile phone and vice
versa.
2.
You have to use a motorcycle specic GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth. Most automotive GPS systems
do not have this feature.
3.
The Sena SR10 is a Bluetooth two-way radio adapter for group communication,
and uses Hands-Free Prole. The incoming audio from the two-way radio via
SR10 is heard in the background while having an intercom conversation or a
mobile phone call.
4.
The GPS navigation or a radar detector could be connected to the SR10 by
wire. The GPS voice instruction or the radar detector alarm is also heard in the
background via SR10 while having an intercom conversation or a phone call.
Please refer to the SR10 User’s Guide for details.

Produktspecifikationer

Varumärke: Schuberth
Kategori: Headset
Modell: SC1M

Behöver du hjälp?

Om du behöver hjälp med Schuberth SC1M ställ en fråga nedan och andra användare kommer att svara dig




Headset Schuberth Manualer

Headset Manualer

Nyaste Headset Manualer