Scotts LCS31020S Bruksanvisning

Scotts Gräsklippare LCS31020S

Läs nedan 📖 manual på svenska för Scotts LCS31020S (42 sidor) i kategorin Gräsklippare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/42

OWNER S MANUAL’

CORDLESS 20 VOLT CHAIN SAW LITHIUM ION BATTERY PACK/-

Model LCS31020S

Your chain saw has been engineered and manufactured to our high standard for dependability, ease of

operation, and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.-

WARNING: To reduce the risk of injury, the user must read and understand the owner s manual ’

before using this product.

Thank you for your purchase.

DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PART,

SERVICE QUESTIONS? GO TO SCOTTS.AMERICANLAWNMOWER.COM OR CALL

1 618 7474 BETWEEN 8:00AM 5:00PM EST FOR ASSISTANCE. -800- - -

ADD OIL TO OIL RESERVOIR BEFORE FIRST USE.

CA Compliant Charger Included (Model No. CHL82000)

BATTERY MUST BE CHARGED BEFORE

FIRST USE. TWO TO THREE INITIAL

CHARGING/DISCHARGING CYCLES MAY

BE REQUIRED TO ACHIEVE MAXIMUM

RUN TIME/CAPACITY.

GENERAL POWER TOOL SAFETY WARNINGS

IMPORTANT SAFETY WARNINGS

LCS31020S

WARNING: Read all safety warnings and instructions. Failure to

follow the warnings and instructions may result in electric shock, fire

and/or serious injury.

Save all warnings and instructions for future reference. The term

“power tool” in the warnings refers to your mains-operated

(corded) power tool or battery operated (cordless) power tool. -

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

• Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching outlets

will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

• Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away from

heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is unavoidable,

use a ground fault circuit interrupter (GFCI) protected

supply. Use of a GFCI reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non skid -

safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the

off position before connecting to power source and/or -

battery pack, picking up or carrying the tool. Carrying power

tools with your finger on the switch or energising power tools that

have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust related hazards.-

Power tool use and care

• Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding

of moving parts, breakage of parts and any other

condition that may affect the power tool s operation. If ’

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind and

are easier to control.

• Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed. Use

of the power tool for operations different from those intended

could result in a hazardous situation.

Battery tool use and care

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another battery

pack.

• Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

TO REDUCE RISK OF INJURY:

Before any use, be sure everyone using this tool reads and

understands all safety instructions and other information

contained in this manual.

CAUTION: Wear appropriate personal hearing protection

during use. Under some conditions and duration of use, noise

from this product may contribute to hearing loss.

Save these instructions and review frequently prior to use

and in instructing others.

WARNING: When using electric gardening appliances,

basic safety precautions should always be followed to

reduce risk of fire, electric shock, and personal injury,

including the following:

READ ALL INSTRUCTIONS

CHAIN SAW SAFETY WARNINGS

• Keep all parts of the body away from the saw chain when the

chain saw is operating. Before you start the chain saw, make

sure the saw chain is not contacting anything. A moment of

inattention while operating chain saws may cause entanglement of

your clothing or body with the saw chain.

• Always hold the chain saw with your right hand on the rear

handle and your left hand on the front handle. Holding the

chain saw with a reversed hand configuration increases the risk of

personal injury and should never be done.

• Hold the power tool by insulated gripping surfaces only,

because the saw chain may contact hidden wiring. Saw chains

contacting a live wire may make exposed metal parts of the power

tool live and could give the operator an electric shock.

• Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce personal

injury by flying debris or accidental contact with the saw chain.

• Do not operate a chain saw in a tree. Operation of a chain saw

while up in a tree may result in personal injury.

• Always keep proper footing and operate the chain saw only

when standing on fixed, secure and level surface. Slippery or

unstable surfaces such as ladders may cause a loss of balance or

control of the chain saw.

• When cutting a limb that is under tension be alert for spring

back. When the tension in the wood fibers is released the spring

loaded limb may strike the operator and/or throw the chain saw out

of control.

• Use extreme caution when cutting brush and saplings. The

slender material may catch the saw chain and be whipped toward

you or pull you off balance.

• Carry the chain saw by the front handle with the chain saw

switched off and away from your body. When transporting or

storing the chain saw always use the guide bar cover. Proper

handling of the chain saw will reduce the likelihood of accidental

contact with the moving saw chain.

• Follow instructions for lubricating, chain tensioning and

changing accessories. Improperly tensioned or lubricated chain

may either break or increase the chance for kickback.

• Keep handles dry, clean, and free from oil and grease. Greasy,

oily handles are slippery causing loss of control.

• Cut wood only. Do not use chain saw for purposes not

intended. For example: do not use chain saw for cutting

plastic, masonry or non wood building materials. -Use of the

chain saw for operations different than intended could result in a

hazardous situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar touches an

object, or when the wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse reaction, kicking

the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the

guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the saw which

could result in serious personal injury. Do not rely exclusively upon the

safety devices built into your saw. As a chain saw user, you should take

several steps to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip, with thumbs and fingers encircling the

chain saw handles, with both hands on the saw and position

your body and arm to allow you to resist kickback forces.

Kickback forces can be controlled by the operator, if proper

precautions are taken. Do not let go of the chain saw.

• Do not overreach and do not cut above shoulder height. This

helps prevent unintended tip contact and enables better control of

the chain saw in unexpected situations.

• Only use replacement bars and chains specified by the

manufacturer. Incorrect replacement bars and chains may cause

chain breakage and/or kickback.

• Follow the manufacturer s sharpening and maintenance ’

instructions for the saw chain. Decreasing the depth gauge

height can lead to increased kickback.

GENERAL POWER TOOL SAFETY WARNINGS

• When battery pack is not in use, keep it away from other met-

al objects, like paper clips, coins, keys, nails, screws or other

small metal objects, that can make a connection from one

terminal to another. Shorting the battery terminals together may

cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, flush

with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation

or burns.

Service

• Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

• When servicing a power tool, use only identical

replacement parts. Follow instructions in the Maintenance

section of this manual. Use of unauthorized parts or failure to

follow Maintenance instructions may create a risk of shock or

injury.

CAUTION: Use only the following type and size battery(ies):

BL82120.

WARNING: California Proposition 65: This product contains

chemicals known to the State of California to cause cancer, birth

defect or other reproductive harm.

WARNING: Some dust and debris created by the use of this tool

could contain chemicals known to the State of California to cause

cancer and birth defects or other reproductive harm. Some

examples of these chemicals are:

 Chemicals in fertilizers

 Compounds in insecticides, herbicides and

pesticides

 Arsenic and chromium from chemically treated lumber

Your risk from exposure to these chemicals varies, depending on how

often you do this type of work. To reduce your exposure, work in a

well ventilated area and with approved safety equipment, such as dust -

masks that are specially designed to filter out microscopic particles.

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov.

LCS31020S

Produktspecifikationer

Varumärke:	Scotts
Kategori:	Gräsklippare
Modell:	LCS31020S
Blåtand:	Ja
Kontinuerlig ljuduppspelningstid:	8 uur
Bluetooth-version:	3.0+HS
Bluetooth-profiler:	A2DP, HFP, HSP
Anslutningsteknik:	Draadloos
Frekvensband:	2.4 GHz
Bärmetod:	In-ear
Typ av headset:	Stereofonisch
Impedans:	- Ohm
Placera högtalare hörlurar:	Intraauraal
Hörlurars frekvensområde:	- Hz
Anslutningsområde:	10 m
Standbytid:	200 uur
Akustiskt system:	Gesloten
Mått (B x D x H):	23 x 15 x 40 mm
Mikrofonfrekvens:	- Hz
Typ produkt:	Headset
Batteriteknik:	Lithium-Ion (Li-Ion)