Seco-Larm VA-1102B-WYQ Bruksanvisning

Seco-Larm mottagare VA-1102B-WYQ

Läs nedan 📖 manual på svenska för Seco-Larm VA-1102B-WYQ (4 sidor) i kategorin mottagare. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
®
4-in-1 HD Video Distributors
Manual
Features:
* VA-1104B-WYQ
–
special order only
TVI / CVI / AHD / Analog compatible
Distributes one video input to two (or four*)
video outputs
Connect to a video camera, multiplexer,
DVR etc.
LED power indicator
Signals are cleaned and buffered to ensure
clear video over the camera's
recommended maximum distance
VA-1102B-WYQ shown
ENFORCER 4-in-1 HD Video Distributors
2 SECO-LARM U.S.A., Inc.
Overview:
ENFORCER 4-in-1 HD Video Distributors are the ideal way to distribute a single video signal to
multiple locations. Using noise-rejection circuitry, the 4-in-1 HD Video Distributors actively
duplicate video signals to be sent to either two (or four*) separate locations. The distributors buffer
incoming signals before duplication for clean transmission.
Model VA-1102B-WYQ VA-1104B-WYQ*
Number of inputs 1x BNC
Number of outputs 2x BNC 4x BNC
Video output format HD-TVI / CVI / AHD / Analog
Video input level 0.8~1.2Vp-p, 75Ω
Video output level 1Vp-p, 75Ω
Image gain 6dB
Video bandwidth 350MHz, -3dB
Power supply 12VDC, 500mA
Current draw 60mA 220mA
Operating humidity 0~95% non-condensing
Operating temperature 32°~131° F (0°~55° C)
Dimensions 25/16"x115/16"x111
/16" (58x49x42 mm) 57/16"x33/8"x13/16" (138x86x30 mm)
Weight 2.5-oz (70g) 4.9-oz (140g)
Parts List:
Specifications:
Introduction:
1x 4-in-1 HD Video
Distributor
1x Manual 1x Power adapter 1x DC Jack connector
2x Mounting screws
(VA-1102B-WYQ)
2x Plastic wall anchors
(VA-1102B-WYQ)
4x Mounting screws
(VA-1104B-WYQ)
4x Plastic wall anchors
(VA-1104B-WYQ)
* VA-1104B-WYQ
–
special order only
VA-1102B-WYQ shown
* VA-1104B-WYQ
–
special order only
11/32"
(26mm)
111
/16"
(42mm)
25/16"
(58mm)
Power input
Video output
Power LED
Video input + ‐
115/16"
(49mm)
ENFORCER 4-in-1 HD Video Distributors
SECO-LARM U.S.A., Inc. 3
Sample Application (VA-1102B-WYQ):
Installation:
Sample Application (VA-1102B-WYQ Stacking):
1. Place the 4-in-1 HD Video Distributor where the video inputs and outputs can be easily accessed.
2. Plug the male BNC connector into the input female BNC connector on the distributor.
3. Plug the male BNC connectors into the output female BNC connectors on the distributor.
4. Connect power to the distributor with the included 12VDC power adapter and DC jack connector.
5. Turn on power to the displays and the video output unit the distributor is connected to.
NOTE: Maximum distance between the camera and DVR/monitor is determined by the camera's
recommended maximum distance.
12VDC Power supply
Bullet Camera
Monitor 1 Monitor 2
Max. range between camera and monitor
determined by camera's max. distance
+ ‐
Max. range between camera and DVR/monitor
determined by camera's max. distance
DVR
12VDC Power supply
Bullet Camera
Monitor 2
12VDC Power supply
Monitor 1
+ ‐
+ ‐

Produktspecifikationer

Varumärke: Seco-Larm
Kategori: mottagare
Modell: VA-1102B-WYQ

Behöver du hjälp?

Om du behöver hjälp med Seco-Larm VA-1102B-WYQ ställ en fråga nedan och andra användare kommer att svara dig


mottagare Seco-Larm Manualer

Seco-Larm

Seco-Larm VA-1102B-WYQ Bruksanvisning

18 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Alto

Alto D1 Bruksanvisning

16 Januari 2025
Alto

Alto MC700.4 Bruksanvisning

16 Januari 2025
Alto

Alto MC250.4 Bruksanvisning

16 Januari 2025
Alto

Alto MC250.8 Bruksanvisning

16 Januari 2025
Alto

Alto D4 Bruksanvisning

16 Januari 2025
Alto

Alto D3 Bruksanvisning

16 Januari 2025
Alto

Alto MC500.4 Bruksanvisning

16 Januari 2025
S.M.S.L

S.M.S.L PA200 Bruksanvisning

15 Januari 2025
Peavey

Peavey CKd 608 Bruksanvisning

15 Januari 2025
Wavtech

Wavtech link700.4plus Bruksanvisning

14 Januari 2025