SecuTech SECU-TANK ONE Bruksanvisning

SecuTech Mätutrustning SECU-TANK ONE

Läs nedan 📖 manual på svenska för SecuTech SECU-TANK ONE (16 sidor) i kategorin Mätutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

Version 04-2017

Setup and Operation

P. 1

Setup and Operation

of SECU-TANK tank monitoring devices ’ ’

ONE RELAY / software version V6.0x or higher

QUATTRO software version V6.0x or higher

NET / QUATTRO NET software version V6. or higher0x

DATA GSM / QUATTRO GSM software version V6.0x or higher

Content:

Page:

Device setup and probe mounting 2

Control elements and display 2

Setup / Programming 4

Programming examples 7

Tank with interior mantle 8

Special parameters 9

Error codes / error display 12

Add. setup NET / QUATTRO NET 13

Add. setup DATA GSM / QUATTRO GSM 14

Order numbers 15

Maintenance 16

P. 2

Setup and Operation

Version 04-2017

Device setup and probe mounting

Concerning installation and mounting as well as regulations and operation please check the cor-

responding device documentation.

The initial setup is to be performed after completed mounting.

The monitoring devices of the SECU TANK-series are to be used for tank content measurement

and if applicable for data forwarding or transmission.

For programming of the device the subsequent description is to be followed.

Determine the tank data beforehand and enter it in the menu input steps.

To enter the menu mode from the display g mode press the [Enter] push button. in

Conrm the ‘Exit’ menu item in step 0 or 7 or 8 to exit the programming mode and return to the

general displaying mode.

This tank content meas ing system is not a safety device. ur

The device can support the safety device of the tank but cannot replace it.

Control elements and display

Pushbuttons

The device setting is to be performed via three little blue pushbuttons: [ + ] [Enter] [ - ]

They are located on the electronic PCB between the connecting clamps.

Language

The menu operating language is selectable via menu item 18 by pressing the buttons

[Enter] [ + ] [ + ] [ + ] . . . 18. Language/Sprache [Enter] . . .

The setup of the device has to be completed once during the initial setup. After the initial setup

the device operates in the displaying mode with closed cover.

Display panel

The LCD-display consists of 2 rows of 16 characters.

The display has a background lighting for the best readability at all lighting conditions.

Depending on the number of connected measuring the following display will be shown probes :

One tank: Two or more tanks , paging forward… :

In case of more than one tank the displaying of the single tanks shown above can be exten ded

by showing the total inventory the percent values of the single tanks. and

At menue item ‘6. View’ select ‘Percent = YES ( / No)

(paging forward to)

Tank 2: => ...

T2 Nam Content/Le

Fillspace/L cm/%

T1 Name Content/L

Fillspace/L cm/%

Total invent. Liters∑

% values: T1 T2 T3 T4

Liters T1 Liters T2

Liters T3 Liters T4

Version 04-2017

Setup and Operation

P. 3

Choose the displaying mode:

In m View the favored displaying mode has to be selected. en ep u st ‘6. ‘

Therefore the menu steps 1 to 5b need to be setup.

The upper display line shows the name of the tank/uid.

The tank can be renamed in ’18. Language+Name‘.

The lower display line can show the llable free space in the tank and /or the inventory volume in

percent up to the lling limiter or the present cm level.

Setup: View tanks ‘Single/Details’

In line 2: Fillable spac (-) L + Vol. percent: e

(bottom left) (bottom right)

In line 2: Fillable space (-) L + Level in cm:

In line 2: Volume percent + Level in cm:

RECOMMENDATION:

Choose displaying of llable space + % or cm.

In case of tank lling the person has to determine the llable free space in the tank

before start fueling.

Another benet:

In the ic above the left value in the lower line shows graph –x.xxxL

That the llable free space as well as the consumed amount since last time is

the tank has been fueled up to the lling limit.

ALTERNATIVE In case of a QUATTRO-xxx device

with 2 or 3 or 4 measuring probes tanks in example (3 )

the displaying may be setup to ‘common/together . ‘

(Shows only the Liter values, without paging forward.)

Additionally the total inventory can be display , ∑ed

showing the Liter sum and the single % values of

each tank: Select ‘Percent values = YES’

Produktspecifikationer

Varumärke:	SecuTech
Kategori:	Mätutrustning
Modell:	SECU-TANK ONE
Färg på produkten:	Black, Turquoise
Snäll:	Batterijlader voor binnengebruik
Antal batterier/batterier som stöds:	1
Inspänning:	230 V
Typ av mat:	AC
Varumärkeskompatibilitet:	Makita
Batteri/Batteri laddningstid:	1.17 uur
Kompatibel batteriteknik:	Nickel-Cadmium (NiCd), Nickel-Metal Hydride (NiMH)
Laddningsindikator:	Ja
Maximal laddningstid:	1.17 uur
Typ produkt:	Batterijlader