Sencor SWM 3777 Bruksanvisning

Sencor Fm-sändare SWM 3777

Läs nedan 📖 manual på svenska för Sencor SWM 3777 (52 sidor) i kategorin Fm-sändare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/52
SWM 3777
USER’S MANUAL MP3/BT FM Modulator
NÁVOD K OBSLUZE MP3/BT FM modulátor
NÁVOD NA OBSLUHU MP3/BT FM modulátor
HASZNÁLATI ÚTMUTATÓ MP3/BT FM modulátor
INSTRUKCJA OBSŁUGI Modulator MP3/BT FM
EN - 1
DESCRIPTION OF EQUIPMENT
1
2
3
4
5
6
7
1 Previous track
2 USB charging port (max. 2.4A)
3 USB port for portable devices
4 Display panel
5 Next track
6Playback/pause/call answer/call back/change
frequency
7 TF memory card slot
EN - 2
SETTING UP AND PAIRING WITH FM RADIO
Before rst use, be sure to read the safety instructions con-
tained in this user's manual carefully. Connect the modula-
tor to the car socket power supply (12 - 24V). The rst dis-
played value on the display panel indicates the voltage in the
on-board network of a car, such as 12V. Tune any vacant
frequency on your car stereo and then press the Change
frequency and mode” button to tune the same frequency
on the modulator (No.6 on the gure). When this button is
pressed, the frequency number on the modulator display will
start fl ashing, the press the arrow buttons (No.1 and 5 in the
gure) to set the desired frequency matching the one of your
FM car stereo. Hold down the button (No.1 and 5) to increase
the speed of searching for the desired frequency.
PAIRING VIA BLUETOOTH
Find the Bluetooth modulator name “SWM 3 on your 777
Bluetooth portable device to be paired (such as a mobile
phone) and start the pairing process. If you are requested to
enter a pairing code while your device and the modulator are
being paired, use the following code: “0000”.
Note: To ensure a stable Bluetooth connection, make sure
that the distance between the modulator and your connected
device is kept within 5m.
Attention: Some connected devices support common vol-
ume setting. If some of the connected devices do not sup-
port this feature, the volume setting will operate separately
on each device.
USB CHARGING INPUT
This input (No.2 on the gure “Device description") is de-
signed for connecting and charging portable devices. Maxi-
mum USB port load is 2.4 A.

Produktspecifikationer

Varumärke: Sencor
Kategori: Fm-sändare
Modell: SWM 3777

Behöver du hjälp?

Om du behöver hjälp med Sencor SWM 3777 ställ en fråga nedan och andra användare kommer att svara dig