SereneLife IPCAMHD15 Bruksanvisning

SereneLife övervakningskamera IPCAMHD15

Läs nedan 📖 manual på svenska för SereneLife IPCAMHD15 (3 sidor) i kategorin övervakningskamera. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

1 2 3

www.SereneLifeHome.com

Safety Instruction

These instructions are intended to ensure that user can

use the product correctly to avoid danger or property loss.

Warnings

1. Proper conguration of all passwords and other security settings

is the responsibility of the installer and end user.

2. In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region.

Please refer to technical specications for detailed information.

3. Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 100 to 240 VAC or 5

VDC according to the IEC60950-1 standard. Please refer to

technical specications for detailed information.

4. Do not connect several devices to one power adapter as adapter

overload may cause overheating or a re hazard.

5. Please make sure that the plug is rmly connected to the power

socket.

6. If smoke, odor or noise rise from the device, turn o the power

at once and unplug the power cable, and then please contact

the service center.

www.SereneLifeHome.com

1. Install "MIPC" APP

Method I: Download APP in: www.mipcm.com/download;

Method II: Scan to Download:

Method III: MIPC Download " " APP from APP Store (iOS) or

Play Store (Android).

2. Register an Account

Open " " APP, click " " button, register & log in as MIPC register

instructed (For your account safety & retrive password,

we suggest you to bind with email before log in).

www.SereneLifeHome.com

3. Add Camera

Click on " " in top left corner, choose " " + PTZ cameras

(FIX/Cloud box/ Panoramic), scan the QR code on bottom of the

camera, and tap the " " button to enter the network Add

connection interface.

4. Select Network Connection

You could choose either " " or Sound connection

" " to connect the camera.Ethernet connection

Note:

1. Press for 1 second to enter Wi-Fi conguration; press for RESET

10 seconds or longer to restore to factory settings (when you

hear a chime, then setting successfully).

2. Try "Ethernet connection Sound connection" if " " unsuccessful.

www.SereneLifeHome.com

Option 1: Sound connection

a. Click the " " icon, setting up Wi-Fi for cameraSound connection

(only support 2.4GHZ), input the Wi-Fi password;

b. Power on the device (30-60 seconds after you connect the power,

you will hear the chime and the IR light will turn o,

now camera is powered on);

c. Already heard the voice hint1. Click the " " if you hear the

chime, and wait until successfully connected.

2. If no chime heard, please press the button for 1 second,RESET

you will hear the voice prompt say "Waiting for receiving

the wireless conguration", click "Already heard the

voice hint", and wait until successfully connected.

Prompt: Our APP will be in continuously update for better users

experience. The actual operation interface may not accordance

with this manual, please operate according to APP.

5 6 74

Questions? Comments?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.SereneLifeHome.com

Option 2: Ethernet connection

a. Ethernet connection Click the " " icon;

b. Power on the device, connect the camera to router with

Ethernet cable (camera will be powered on in 30-60 seconds);

c. Add the matched device until set up successfully.

www.SereneLifeHome.com

FAQ

1. What if the camera cannot connect to Wi-Fi?

• Check if your Wi-Fi password contains special characters such

as spaces, commas, periods, etc, which may not be recognized

by the camera.

• The camera is only available to 2.4GHz Wi-Fi, not 5GHz Wi-Fi.

Please check and see your Wi-Fi frequency band of the router.

• Keep your mobile phone as close to the camera as possible,

and keep your camera as close to the router as possible.

• Poor Wi-Fi signal may result in failure to connect to your camera.

You can use a Wi-Fi Range Extender which will extend the Wi-Fi

signal and wireless coverage of existing wireless networks.

www.SereneLifeHome.com

• If you have an Ethernet cable at home, please try to set up the

camera with it, then follow the directions on the APP to change

into a Wi-Fi network.

If you fail to connect the camera, please follow these •

steps and try again:

Remove power cord. Then, re-plug it in.1.

Press and hold the button for over 10 seconds to 2. RESET

restore the camera to factory settings when you hear the

voice prompt and the IR light turns on.

3. Set up the camera once more when you hear the voice prompt.

2. APP can't receive the alarm notication?

• The camera has motion detection and alarm function, but it

needs manual setup. Enter the camera "Steps: settings",

select " ", enable the motion detection feature Notications

and save the settings.

www.SereneLifeHome.com

3. What if I forget my account & password?

• You can nd your account & password with the binding email,

it will not be found if not binding with email.

4. How can I see the recorded video?

• For your privacy and security, video les are encrypted, it must

be playback through mobile phone APP or computer APP, and

it cannot be played directly on the computer, you need to export

the video through SDtool, a special video export tool.

The SDtool can be downloaded from www.mipcm.com.

5. How does the camera restore to factory settings?

• Press and hold the button for 10 seconds, you will hear RESET

the voice prompt "Restore the factory settings successfully",

now camera starting to restore, it will nish about 60 seconds,

then you will hear a chime (Do not power o during restore

procedures).

Produktspecifikationer

Varumärke:	SereneLife
Kategori:	övervakningskamera
Modell:	IPCAMHD15

Behöver du hjälp?

Om du behöver hjälp med SereneLife IPCAMHD15 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera SereneLife Manualer

SereneLife IPCAMHD82EU Bruksanvisning

9 September 2024

SereneLife IPCAMHD15 Bruksanvisning

6 September 2024

SereneLife IPCAMHD80 Bruksanvisning

6 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Philips B120E Bruksanvisning

16 Januari 2025

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025