SereneLife SLSFE11 Bruksanvisning

SereneLife Valv SLSFE11

Läs nedan 📖 manual på svenska för SereneLife SLSFE11 (2 sidor) i kategorin Valv. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

SLSFE11

Portable Electronic Safe Box

INSTRUCTIONS

1. TO PROGRAM AND CHANGE

THE USER CODE

a. First, open the door of your safe,

without turning the rotary knob before

you start to program your safe.

Remove the battery compartment cover on the back of the door and

place the batteries (4x1.5 batteries type AA) into the battery holder

correctly. (Batteries included inside the safe).

b. While the door is open, press the button behind the door. The yellow

light will be on with a short beep. Please input the user code (from 3-8

digits) using any number from “0” to “9” within 30 seconds, then press “E”

to conrm it.

c. To change the user code, please use the same procedures as above.

2. TO OPEN THE SAFE

Input the user code you programmed, then press ”E”. The green light will

be on. Please turn the knob within 5 seconds and pull out to open the

safe. If a wrong digit is input, you can press “C” to cancel it.

Note: With each press the yellow light will ash with a short beep,

indicating that the micro processor conrmed it. If the yellow light keeps on

ashing with the beep, it means the code is wrong. Inputting the wrong

code three times will result in the micro processor refusing to accept the

input for 20 seconds. If you press the wrong code three times again, the

micro processor will refuse to accept input for 5 minutes.

3. TO CLOSE THE SAFE

Close the door and turn the knob counter-clockwise to lock the safe.

www.SereneLifeHome.com

4. HOW TO USE YOUR OVERRIDE KEYS

For your convenience, we have engineered a manual override system for

your safe. We have supplied 2 override keys. These keys allow you to

open the safe at all times, even when the batteries are run down or when

you have forgotten your code. The keyhole is situated behind the over

ride cover plate (logo) beside the knob. Take o the cover, insert the

override key and turn anti-clockwise; then open the safe as usual.

5. TO REPLACE THE BATTERIES

If the red light is on with the green light, when you input your personal

code to open the safe, it means the batteries are low and you should

change the batteries. To be sure the batteries are installed correctly,

please test the code before you close the door.

Always use alkaline batteries only.

6. INSTALLING THE SAFE

The safe can be secured to the oor, wall or in a cupboard.

For your convenience, there are holes both in the bottom and on the

back of the safe, so it can be xed by the expansion bolts supplied.

WARNING:

a. Please keep the override keys of the safe in another safe place.

Not inside the safe.

b. In the event the keys are lost, the code is misplaced and the batteries are

weak, the supplier does not take responsibility for this product.

www.SereneLifeHome.com

Produktspecifikationer

Varumärke:	SereneLife
Kategori:	Valv
Modell:	SLSFE11
Färg på produkten:	Metallic, Silver
Bredd:	838.19 mm
Djup:	762 mm
Höjd:	1028.7 mm
Maximal viktkapacitet:	68 kg
Panelmonteringsgränssnitt:	Nee mm
Rotationsvinkel:	360 °
Mått (B x D x H):	838.19 x 762 x 1028.7 mm
Tiltvinkelområde:	0 °
Hiss:	0 cm