Sevenoak SK-R6 Bruksanvisning

Sevenoak Stativ SK-R6

Läs nedan 📖 manual på svenska för Sevenoak SK-R6 (1 sidor) i kategorin Stativ. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

SK-R01

Shoulder

Support Rig

The SK-R01 Shoulder Support Video Stabilizer is a support that

features two-point Stabilization using a shoulder mount and a

hand grip.

Thank you for choosing Sevenoak and congratulations on your

Purchase of the Sevenoak SK-R01 Shoulder Support Rig.

The Sevenoak Shoulder Support Rig is a compact camera

stabilization rig that uses a comfortable foam padded shoulder

pad mount and a hand grip to help you support your camera

and keep it steady when shooting video.The SK-R01 reduces

muscle fatigue,while eliminating distracting camera move

-ment for smoother,more professional-looking movies.It can

support cameras weighing up to 5.5 pounds.

The SK-R01 is height-adjustable and can be used on the left

or the right shoulder,with a hand grip that’s detachable and

can be used as a stand-alone support for lightweight cameras.

The SK-R01 weighs just 2.25 pounds.

4. Mount the hand grip to the shoulder mount frame by

screwing the end of the hand grip into the hole provided

at the end of the camera baseplate.Align the hand grip

correctly to the hole,which is angled slightly.Tighten the

hand grip securely.

7. Adjust the distance of the camera from your eye by loosening

the baeplate mounting screw slightly and sliding the camera

forward or back to the desired position.Tighten the screw

securely. Do not overtighten.

8. To adjust the vertical position of the camera,loosen the

shoulder mount frame mounting plate screw and slide the

shoulder mount frame up or down to the desired position.

Tighten the screw securely.Do not overtighten.

When you’re ﬁnished shooting,remove the camera from the

shoulder mount.

Slots on end of the shoulder pad may be used for additional

accessories such as counterweights and shoulder straps.

5. Screw the camera mounting screw into the camera baseplate

using one of the holes provided.

6. Attach the camera to the baseplate using the camera

mounting screw.Tighten securely.

1. Install the shoulder pad mounting plate on to the shoulder

pad using the two included Allen screws and the included

Allen wrench.If the Sk-R01 will be on the right shoulder,place

the plate so that the long part of the plate extends to the

right of the screws.If the left shoulder will be holding the

support,the long part of the plate should extend to the left

of the screws.

2. Attach the shoulder mount frame to the shoulder pad using

the shoulder mount frame mounting plate and the included

shoulder mount frame mounting plate screw.With the screw

in place,you can adjust the vertical height of the rig by

loosening the screw slightly and moving the shoulder mount

frame up or down until it’s at desired height.Then tighten the

mounting screw securely.Do not overtighten.

3. Attach the camera baseplate to the shoulder mount frame

using the baseplate mounting plate and the baseplate

mounting plate screw.After the baseplate is munted to the

shoulder mount frame,you can adjust the baseplate by

loosening the screw and sliding the baseplate forwards or

back.When the baseplate is in the correct position,tighten

the mounting screw securely.Do not overtighten.

Please read and follow these instructions,and keep this

manual in a safe place.

Handle the unit with care.

Clean the unit with a soft,dry cloth.

Use only parts provided by the manufacturer.

Make sure everything is secure before proceeding.

Make sure the item is intact and that there are no missing parts.

Do not exceed the maximum load capacity.

All photos are for illustrative purposes only.

Hand grip may be used as a

standalone grip for smaller

cameras.

Threaded holes in camera

baseplate may be used to

mount accesories with the

use of brackets.

Removable hand grip

Foam shoulder pad

Stainless steel shoulder mount frame

Camera baseplate

Camera mounting screw

Shoulder pad mounting plate with two

Allen screws (+1 spare)

Allen wrench

Mounting the camera

Components

Warnings

Shoulder mount frame mounting plate

with one screw

Baseplate mounting plate with one screw

Limited one-year Warranty

Sevenoak provides a limited warranty that this product is free

from defects in materials and workmanship to the original

purchaser under normal use for a period of one (1) year from

the original purchase date or thirty(30) days after replace-ment

(the“Warranty Period”),Whichever occurs later.Our responsibility

with respect to this limited warranty shall be limited solely to

repair or replacement,at its option,of any product which fails

during normal consumer use.

To obtain warranty coverage during the Warranty Period,

contact your place of purchase(“Seller”) to obtain a return

merchandise authorization(“RMA”) number,and return to

Seller the defective Product along with proof of purchase and

the RMA number.

This warranty does not extend to damage or failure which

results from misuse,neglect,accident,alteration,abuse,improper

installation or mainterance.EXCEPT AS PROVIDED HEREIN,

SEVENOAK MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY

IMPLIED WARRANTIES,INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.This warranty provides you with speciﬁc

legal rights,and you may also have additional rights which vary

from state to state.

2017 Sevenoak Inc.Visit us on the

web at www.sevenoak.biz

2017 Sevenoak Inc.Visit us on the

web at www.sevenoak.biz

Produktspecifikationer

Varumärke:	Sevenoak
Kategori:	Stativ
Modell:	SK-R6
Vikt:	250 g
Bredd:	60 mm
Djup:	113 mm
Höjd:	25 mm
Hållbarhetscertifikat:	RoHS
Antal per paket:	56 stuk(s)
Uteffekt:	30 W
Utström:	6 A
Spännande:	5 V