Shark NeverChange5 HP150 Bruksanvisning

Shark Luftrenare NeverChange5 HP150

Läs nedan 📖 manual på svenska för Shark NeverChange5 HP150 (10 sidor) i kategorin Luftrenare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/10

Air Puriﬁer

HP150

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

GENERAL WARNINGS

1. DO NOT operate any unit with a damaged cord or

plug. Consult your local waste authority for information

regarding available recycling and/or disposal options.

2. DO NOT DO NOT run cord under carpeting. cover

cord with throw rugs, runners, or similar coverings.

DO NOT route cord under furniture or appliances.

Keep cord away from high-traffic areas where it will

not be tripped over.

3. If the power cord is damaged, it must be replaced by

the manufacturer, its service agent, or similarly qualified

persons in order to avoid a hazard.

4. This appliance should only be placed on flat and dry surfaces.

5. This appliance is not intended for use by anyone

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

6. Children should be supervised to ensure that they

DO NOT play with the appliance.

7. Cleaning and user maintenance shall not be made by

children without supervision.

8. Prior to cleaning or other maintenance, the appliance must

be unplugged from the electrical outlet.

9. DO NOT handle plug or appliance with wet hands.

10. DO NOT use without filters in place.

11. Only use Shark® branded filters and accessories.

12. DO NOT damage the power cord:

a) DO NOT pull or carry appliance by the cord or use the

cord as a handle.

b) DO NOT unplug by pulling on cord. Grasp the plug, not

the cord.

c) DO NOT stand the appliance on the power cord, close a

door on the cord, pull the cord around sharp corners, or

leave the cord near heated surfaces.

13. DO NOT use with any opening blocked; keep free of dust,

lint, hair, and anything that may reduce airflow.

14. DO NOT use if airflow is restricted. If the air paths become

blocked, turn the appliance off and unplug from electrical

outlet. Remove all obstructions before you plug in and turn

on the unit again.

15. DO NOT use if appliance is not working as it should, or

has been dropped, damaged, left outdoors, or dropped

into water.

16. DO NOT place appliance on unstable surfaces such as

chairs or tables.

17. DO NOT use in the following areas:

a) Wet or damp surfaces

b) Outdoor areas

c) Spaces that are enclosed and may contain explosive or

toxic fumes or vapors (lighter fluid, gasoline, kerosene,

paint, paint thinners, mothproofing substances, or

flammable dust)

18. Turn off all controls before plugging in or unplugging the

appliance.

19. Unplug from electrical outlet when not in use and

before general maintenance or cleaning. For mesh dust

filter maintenance, please refer to the mesh dust filter

maintenance section.

20. Hand wash exterior/hard plastic/non-electronic parts with

a damp cloth only. Do not immerse. Cleaning

with chemicals could damage the unit.

21. Make sure filters are in place after routine maintenance.

ANTI-ODOUR TECHNOLOGY

22. Observe the following when interacting with the

Anti-Odour Technology cartridge.

a) DO NOT attempt to disassemble Anti-Odour

Technology cartridge.

b) Avoid direct contact with the fragrance pod in

the cartridge.

c) DO NOT directly inhale from the anti-odour technology

cartridge.

d) Keep away from children and pets.

e) Keep away from heat, sparks, and open flame.

f) place in direct sunlight.DO NOT

g) Avoid contact with fabrics and finished surfaces.

FRAGRANCE CARTRIDGE FIRST AID

a) Eye contact: Remove contact lenses if present.

Rinse continuously with water for several minutes

b) Skin contact: Wash hands thoroughly after handling.

If irritation or rash develops, seek medical

advice/attention.

c) Inhalation: Move person to fresh air if they are

experiencing any respiratory symptoms. If

symptoms persist, seek medical advice/attention.

d) Ingestion: induce vomiting. Seek medical DO NOT

advice/attention.

23. Dispose of batteries properly. Keep batteries away

from children at all times. Even used batteries can

cause injury.

WARNING: Chemical Burn Hazard. Keep batteries away

from children.

This product contains a lithium button/coin cell battery.

If a new or used lithium button/coin cell battery is

swallowed or enters the body, it can cause severe internal

burns and can lead to death in as little as 2 hours. When

not changing batteries, keep the battery compartment

completely closed. If the battery compartment does not

close securely, stop using the product, remove the batteries,

and keep them away from children. If you think batteries

might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

SAVE THESE INSTRUCTIONS

SETTING UP YOUR AIR PURIFIER

Parts:

1. Air Output Vents

2. Anti-Odour Technology Dia

3. Control Panel

4. Front Display

5. Air Puriﬁer Body

6. Air Intake Vents

7. Mesh Dust Filters

8. HEPA Filter

9. HEPA Filter Door

1. DO NOT plug in the air puriﬁer. First,

carefully turn the air puriﬁer upside

down and place it on a level ﬂoor surface.

Rotate the ﬁlter door counterclockwise

to unlock it, then lift it o to access the

HEPA ﬁlter.

2. Take the HEPA ﬁlter out of its plastic

packaging. Reinstall the HEPA ﬁlter in

either orientation.

3. With the HEPA ﬁlter reinstalled, rotate

the ﬁlter door clockwise until it clicks

into place.

4. Set up the air puriﬁer on a ﬂat, level,

ﬂoor surface, at least 3 inches (8 cm)

away from walls and objects.

If Anti-Odour Technology is included

with your air puriﬁer, ﬁnd the odour

cartridge and follow the instructions to

install it.

5. Carefully remove the yellow sticker on

the top of the air puriﬁer to access the

control panel.

Plug the air puriﬁer into an electrical

outlet and press the power button on

the top control panel.

6. When the air puriﬁer power is on, the

air puriﬁer will begin to analyse the air

quality, indicated by the rotating lights.

After a few seconds, the air puriﬁer will

display the current air puriﬁcation status.

Remove

HEPA ﬁlter

from plastic

packaging

5 6

TIPS FOR SETTING

UP YOUR AIR PURIFIER

• Make sure the front panel of the air puriﬁer

faces away from the closest wall.

• Do not move the unit while it is running. Turn

o the power and unplug the air puriﬁer before

moving it.

• Make sure the air intake vents are not blocked.

• Do not place anything on the air puriﬁer.

• Do not place the air puriﬁer near heaters

or radiators.

• Keep the air puriﬁer out of direct sunlight and

away from water or other liquid.

• Keep all nearby doors and windows closed

when operating the air puriﬁer.

• Avoid using in very humid environments.

Note: Anti-Odour Technology is not included

on all Shark HP150 series products.

Note: HEPA Filter Technology allows up to 5 years* of use out of a single HEPA ﬁlter.

*Tested to GB/T18801-2015 P.CCM, based on 50% CADR decline, 12 sq. m cleaning area and 12 hours daily operation on MAX fan speed.

Remove sticker

then power on

8cm

minimum

Insert

Anti-Odour

Technology

Cartridge

Anti-Odour cartridge is optional.

Does not need to be inserted for the

Air Puriﬁer to function.

CONTROL PANEL

There is a control panel on the top of the air puriﬁer and a display screen on the front.

TOP CONTROL PANEL

FRONT DISPLAY SCREEN

Displays the current air puriﬁcation status based on the Air Info

mode selected on the top control panel.

TOP CONTROL PANEL BUTTONS

On/O: Press to turn the power on or o.

 Auto Mode: Press to turn on Auto Mode. In this setting the fan

speed automatically adjusts based on real-time air puriﬁcation

readings. As the air puriﬁcation improves, the fan speed will

decrease. If it worsens, the fan speed will increase.

Leave your unit in Auto Mode for optimal ﬁlter life

and performance.

 Fan Speed: Adjusts the speed of the fan. Select one of 5 settings:

1 Quiet, 2 Low, 3 Medium, 4 High, 5 Maximum. Select by using the

arrows on the control panel. Note: If fan speed is manually changed,

Auto Mode will be deactivated. For tips and more information, see

the Optimising Fan Speed section.

 Air Info: Press to switch between air puriﬁcation display options.

See the Air Info Settings section for more information.

 Shut-O Timer: Set the number of hours for the air puriﬁer

to run before it automatically shuts o. Timer can be set from

1 to 12 hours.

 Brightness: Adjusts the brightness of both the front display

screen and the top control panel. Switch between 3 options:

full brightness, partially dim, fully dim. In fully dim mode, the

air puriﬁer will continue to run with the LED light o—perfect

for nighttime.

 Dust Filter Life: Press to show the remaining life of the mesh dust

ﬁlters before additional maintenance is required. When Dust Filter

Life reaches 0%, the ﬁlter icon will ﬂash to indicate the mesh dust

ﬁlters need to be checked for debris buildup. See Mesh Dust Filter

Maintenance section for more information.

 Child Lock: Press and hold for two seconds to lock the top control

panel buttons. To unlock, press and hold for two seconds again.

Tips and Tricks:

 Optimise Performance in Eco Mode: If 100% air puriﬁcation status

is achieved for 5 minutes in Auto Mode, your air puriﬁer will enter Eco

Mode. Your unit’s ﬁlter life will be optimised.

 Turn O Beeping: To turn o notiﬁcation sounds, press and

hold the Air Info and Child Lock buttons at the same time for

two seconds. To resume, press and hold both buttons again.

AIR INFO SETTINGS

The built-in sensor detects your air puriﬁcation status to give you real-time information. Use the button to switch between air AIR INFO

status display options.

INFO FRONT DISPLAY

SCREEN REAL-TIME READING

% STATUS

Displays the air puriﬁcation status rating:

• Poor: 0%–69%• Fair: 70%–84%• Good: 85%–100%

% STATUS uses particulate matter (PM) air puriﬁcation standards as determined by the

EPA (United States Environmental Protection Agency) to calculate the status rating.

PARTICLE SIZES

The PM (particulate matter) value is the amount of particulate in

your air, measured in micrograms ( g) per cubic metre. Your air μ

puriﬁer measures three particle sizes, PM1, PM2.5, and PM10.

PM1 Displays the number of PM1-sized particles

in your air, including ultra-ﬁne allergens.

PM2.5 Displays the number of PM2.5-sized particles

in your air, including smoke.

PM10 Displays the number of PM10-sized particles in your air, including dust, and pollen.

Produktspecifikationer

Varumärke:	Shark
Kategori:	Luftrenare
Modell:	NeverChange5 HP150

Behöver du hjälp?

Om du behöver hjälp med Shark NeverChange5 HP150 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Luftrenare Shark Manualer

Shark NeverChange5 HP150 Bruksanvisning

15 December 2024

Shark HE402 Bruksanvisning

20 September 2024

Shark NeverChange5 HP300 Bruksanvisning

20 September 2024

Shark HP100UK Bruksanvisning

7 September 2024

Shark HP202 Bruksanvisning

28 Augusti 2024

Luftrenare Manualer

Nyaste Luftrenare Manualer

Philco Air 4 Bruksanvisning

17 December 2024

Sharp FU-888SV Bruksanvisning

16 December 2024

Mitsubishi MA-83H-W Bruksanvisning

14 December 2024

Vicks EasyCare+ Top Fill Bruksanvisning

10 December 2024

Sôlt GGSPA200W Bruksanvisning

9 December 2024

Sôlt GGSPA600W Bruksanvisning

9 December 2024

Sôlt GGSPA500W Bruksanvisning

9 December 2024

Sôlt GGSPA360W Bruksanvisning

9 December 2024

Rikon 61-200 Bruksanvisning

5 December 2024

Homedics AR-20 Bruksanvisning

27 Oktober 2024